The use case for this will be to detech which screen is connected to
an output from the screen rules.
It is in millimeters because this is what the output provides and in
inches because the DPI is based on that unit and screens are sold with
the size in inches on the box.
Identical viewports are already handled before getting into Lua,
but sometime xrandr gives another viewport that encompass all
others. It has to be removed.
When the screens are created from the viewport in Lua, the signal is
sent too early and the DPI and outputs have not yet been added. This
cause the `connect_for_each_screen` callbacks to be called with a
partially initialized screen object. It also causes the drawables to be
repainted too early.
CAPI now emits "_added" and "awful.screen" takes care of emitting
"added".
With this, there is plenty of palces where the DPI can be set before
those signals are sent. This allows wallpaper with the proper DPI to
work with screens created using `fake_add`. In turn, this will allow
screen rules to control the DPI. In "the past", the DPI used for those
handler was the native DPI of the screen with no opportunity to change
it before hand.
This is easier than messing with the `fake_resize()` method. This will
eventually have an awful.screen.rules equivalent to auto-split the
screen from the rules.
This doesn't mean removing all screens is supported. It isn't and never
will be. The only reason this commit exist is to allow some
initialization and error handling code to be tested.
This commit add an optional `--screen off` command to initialize Lua
without first adding the screens. This is inconvinient for most users
since it restrict the APIs that are usable out of the box.
However, this allows AwesomeWM to work independently from the hardware.
This means that when a screen is unplugged, it is the Lua code that will
remove the screen instead of CAPI pulling the carpet from under. It also
allows to ignore some screen areas before the screen is ever created.
Combined, it makes it possible to work with screens even when they are
physically disconnected. Finally, it will allow for an awful.rules like
API to control how screens are created.
All in all, some people need this for their setup and some people might
want to do it anyway for fine grained and/or dynamaic multi-screen
setups.
This commit also adds 4 new signals to `capi` to be able to
execute code at specific points during the initialization. The commit
improves naughty error notifications to work even if problems occurs
before the screens are added.
Note that AwesomeWM will exit if no screens are created. While it would
be easy to just call `refresh_screen();` after unsetting the magic
variable, doing so would have corner cases. Better be harsher and
prevent the user from shooting themselves in the foot from not reading
the f****** manual. Code introduced in future commits will take care
of automatically calling fake_screen in the event nothing is created.
Fixes#1382
This function allows to update the content of a table using the
content of a second table. It helps to keep the original reference
and to know what has been added and removed.
Add `dpi.lua` to config.ld even if it isn't added yet. This is
because the way the test run has it cached in the build dir. A full
rebuild would take too long and timeout on travis for semi-large PRs.
This code is inside an "if new_timeout and [something else]". Thus, it
only executes when new_timeout is "truthy". Thus, "new_timeout or
[whatever]" will always evaluate to "new_timeout".
This commit removes that tiny bit of dead code.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Technically this doesn't solve any memory leak, but AwesomeWM uses in
average less memory when changing the selected tab in quick succession.
This is because it has less "temporary" tables to track.
The way background are rendered changed to accomodate issues regarding
cliping and border. However this broke the documentation examples.
This commit fixes this in the least hacky way I found.
Fixes#2727
Nobody wants to set this parameter. It is necessary because the old
API allowed `awful.rules` to be used with random for random matching.
This stopped "really" working between the 3.4 and 3.5 release because
the code started to accumulate "corner case" fixes aligned with the
client properties. v4.0 added more ordering and v4.3 added external
sources. After this, it is unusable with external objects, but
`gears.matcher` handle this use case very well.
In a perfect world we would have pure expression matching, but
that's problematic with all the "metaness" of the code. For now,
this adds an imperfect way to match the minimum and maximum of
number properties.
It will be used by the screen rules for the DPI and size properties.
This is hardcoded in `awful.rules`, but cannot be shared due to the
priority corner cases. Given in the long run any "standard" priority
should use the topological sort API, better not try to share *that*
code.
It is now possible to add and remove rules. This is superior to how
`awful.rules` originally handled rules because modules can now
assume adding and removing rules works.
The reason for the methods rather than `table.insert` is partially
because future commits will add signals. In turn, this will allow
`gears.matcher` to be extended by module using it using the extra
"introspection" made possible by the signals.
The name is self explanatory, it adds more actions to a notification.
One of the use case is adding a snooze/reming_me action. Another one
is "mute similar notifications".
The reason is that if actions are provided by rules, only one instance
exist. It was a mistake to couple actions with their notifications. It
could not work reliably and has to be removed.
The commit also change the notification action storage to be a copy
instead of the original table. This allows to append actions (not part
of this commit) without risking adding them to the wrong notification.
**WARNING** This break an unreleased API by removing the `notification`
property of an action.
* app_name: To be used in filters when no clients are found.
* max_width: Allow to set it from the rules, it might be different
when a `widget_template` is used.
* widget_template: Now it can be set from the rules without further
boilerplate code.
The old preset code had a primitive implementation of the rule API
used in `naughty.dbus`. Now that `gears.matcher` is extracted from
`awful.rules`, it is possible to share the code.
The first step is to only enable the old API when the new
`request::preset` isn't connected. This is the same way the legacy
popup is only enabled when nothing is connected to `request::display`.
This removes the imperative "mutex" logic from rc.lua, where it doesn't
belong. It also makes it closer to the "vision" of making `rc.lua` fully
modular.
* action icons
* persistence
* residence
* categories
* animated icons
* more ways to get icons
In addition, the commit also tries its best to attach notifications to
objects using various dubious semi compliant hints or the DBus PID. It
works often enough to be useful.
Some titlebar widgets (`awful.titlebar.widget.titlewidget`,
`awful.titlebar.widget.button` and other specific button widgets) could
not be garbage collected until the associated client was unmanaged,
because the signal connection used to update the widget was never
destroyed, and the signal handling function was keeping a reference to
the widget in its environment. This resulted in high memory usage when
the titlebar widgets were recreated multiple times for the same client
(this does not happen with the default Awesome configuration, but may be
needed for dynamic titlebar reconfiguration in a custom config).
Modify the code to use weak tables instead of direct signal connections
to avoid keeping strong references to widgets. The widget update
functions still keep strong references to the widget itself (creating a
reference loop, but the Lua GC should handle it correctly) and the
client object, but this should not be a problem.
One publicly visible change is that `awful.titlebar.widget.titlewidget`
now has an `update` function, like the button widgets.
Signed-off-by: Sergey Vlasov <sigprof@gmail.com>
This is needed because if async code is run inside of a tooltip timer func the started property may not still be false.
The current version causes random spurious timer already started errors.
This is configurable globally or per-notification. When it is
replaced over dbus, it has a new timeout and *that* should be the
new timeout (starting when the notification is replaced).
Closes#2821
The awful.placement.no_overlap function always looked at the currently
visible clients when placing a new client. This produced a confusing
result when using awful.rules or the sn_rules argument of awful.spawn to
place the client on an unselected tag (the client was placed as if it
would be placed on a currently selected tag; if multiple clients were
placed on the same unselected tag, in many cases they were placed at the
same position, overlapping each other).
Make awful.placement.no_overlap check tags of the placed client and
handle the case of placement on an unselected tag in a more useful way:
- If the client is sticky or at least one of the client tags is
selected, keep the previous behavior: avoid overlap with all other
floating clients which are currently visible, and use the currently
active layout to determine the floating status.
An explicit check based on `c:tags()` is made instead of using
`c:isvisible()`, so that the previous behavior is kept even if the
client is hidden or minimized for some reason.
- If all client tags are unselected, avoid overlap with all other
floating clients which either are sticky or share at least one tag
with the placed client, and use the layout of the first tag of the
placed client to determine the floating status.
Signed-off-by: Sergey Vlasov <sigprof@gmail.com>
A call to cairo_close_path() adds a straight line to the beginning of
the current sub-path. This is used in some of the shapes to, well, close
the shapes.
Sub-paths can be created explicitly via cairo_new_sub_path(), but also
implicitly via cairo_move_to(). When a new sub-path is started, there is
no current point on the path. This means that e.g. cairo_line_to() is in
this start equivalent to cairo_move_to() (= no line is created) and that
cairo_curve_to() first does a cairo_move_to() to the beginning of the
curve. Similarly, cairo_arc() and cairo_arc_negative() first do a
line_to() to the beginning of the arc, and this line_to() can be
implicitly turned into a curve_to().
The problem with the code in gears.shape is that parts of the code
(implicitly) assume that there is not yet any path when the shape
function is called. If this assumption is broken, the call to
close_path() could go to the wrong point, because the path did not start
at the expected position.
Most of the functions in gears.shape already implicitly start a new
sub-path via a call to cairo_move_to(). Those that do not (necessarily)
begin with a call to cairo_move_to() are handled in this commit: They
get an explicit call to cairo_new_sub_path().
This change fixes the issue reported at
https://github.com/awesomeWM/awesome/pull/2804, because the shapes will
no longer be influenced by the pre-existing path. The move_to() that was
left around and caused that issue turns into a degenerate part (it only
has a move_to(), so nothing can be drawn) and is then discarded by
cairo.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Cairo's save/restore methods handle all properties except for the
current path. The path is just left as-is.
A widget's draw method could create some path without consuming it. This
path would then interfere with random things later which did not expect
a path to already exist.
This commits adds calls to cairo_new_path() in the relevant positions to
clean things up.
This not only applies to a widget's draw method, but also
{before,after}_draw_{child,children}. However, these methods could (for
whatever reason) create paths that are to be consumed in one of the
other methods. To keep this working, the path is only cleared after all
of these methods ran.
I do not expect this commit to break anything, because a widget cannot
really assume much about what widget is drawn after it. Especially so,
because partial redraws could mean that some later widget is skipped and
not redrawn.
This should fix the issue reported at
https://github.com/awesomeWM/awesome/pull/2804.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This function checks if a given cairo context has an empty clip. It was
written with the assumption that cairo_clip_extents() produces the x, y,
width, height of the clip extents. However, that function actually
produces x1, y1, x2, y2, where (x1, y1) and (x2, y2) are the corners of
the rectangles.
Due to the way the function is written, it will return non-zero numbers
when there is a translation (cr:translate()). Thus, this function worked
basically never.
Fix this by checking if both points have the same X- or Y-coordinate.
Signed-off-by: Uli Schlachter <psychon@znc.in>
With draw_empty=false, :fit() can return 0,0. Then, when :layout() is
called, it will compute negative widths and heights. This can then cause
lots of problems later on.
Avoid this by having :layout() return nothing instead of producing
negative sizes.
Fixes: https://github.com/awesomeWM/awesome/issues/2799
Signed-off-by: Uli Schlachter <psychon@znc.in>
Also document the `test` property as deprecated. It exists because the
older API (`naughty.notify`) had it. It exists on purpose in the
rewrite, it cannot just be removed even if it was never in a release.
This will be shared by the notifications stored in a wibox/wibar and the
ones using a popup. It extends the constraint and margins container
to take care of some boilerplate code. While other widgets have their
own public API, those 2 are private since they are not different enough
to warrent a new public module.
There is some boilerplate code that make using the widget_template
harder when using the raw `wibox.container.background`. This widget
takes care of it.
It is a normal textbox with some extra boilerplate code. Having this
in a separate widget allows the notification to be defined from rc.lua
without a ton of beautiful options and connect_signal.
This way their name doesn't get mangle by the broken magic. It will also
eventually allow to `error()` in the template when the implicit
`@function` is used.
This commit also fixes a large number of issues found while
proof-reading everything.
ldoc has a magical `@classmod` module type which tries to detect
what is a method and what is a static function. It fails about as
often as it works. This commit makes everything explicit to remove
such issues.
Fixes#2640
Ref #1373
- Fill slider bar with a linear pattern based on current value (if `bar_active_color` and `bar_color` are correctly provided)
- Add examples for the apidoc
Even thought `awful.key` handles optional "release" parameter well,
parameters are also get used before passing them. In case (only)
optional "data" is provided, it faulty gets called on a release event.
* Add a request to handle the wallpaper when a screen is added or
resized.
* Add a request for screen decorations such as bars or gizmos when
a screen is added.
Both are also sent when a new handler is connected.
* naughty.legacy: Fix a regression caused by a prior fix.
The title was only set "later" because it was called too early.
The intended result was to prevent the code from being executed when
there is no leagcy popup, but it had this side effect.
* naughty.dbus: Expose the new "private" methods so they can be tested.
Because it now uses Gio instead of capi.dbus, it isn't possible to
just shim the backend anymore.
* shims: Upgrade the dbus shims to also emulate some Gio behavior.
As usual, it is the most basic version that produces the correct
result. It doesn't try to comply to the real API.
Previously, it would use the "real" args passed to the constructor.
It was a bad decision since:
* It doesn't allow the tag/tasklist to add properties internally
* It forces the widget to be created with a constructor rather than
the alternate declarative syntax
* It doesn't allow a tag/tasklist to be part of a widget_template
Technically this is a behavior change, but I doubt anybody will notice
given it is a dark and little documented corner of the API. Chances are
nobody have been using this API for years.
With this helper, it becomes possible to avoid manually setting common
properties such as the client in the tasklist of tag in the taglist when
the children widgets of the template have a set_+property_name.
This decision was taken out of necessity. While adding more style
elements to `awful.widget.common` isn't something I want, there is
little else to do here. The problem is that popup based lists only
have size constraints in one direction. So without a way to limit
the icon size, it will take 9999 pixels.
It makes some code easier to write. It is mostly useful when the margins
are exposed through another widget. In that case it avoids having to
proxy 5 different property or re-invent the wheel there.
Previously, the border "support" was limited to shapes and would not
move the content by the offset of the border. Borders are now better
supported and thus renamed from `shape_border_width` to `border_width.
In the end, shrinking the widget by the border size is too common to
ignore. It should have been the default all along, just like the clip.
Instead of having the default template hardcoded as code, this turns the
template into a descriptive version. This makes it easier to come up
with own templates: Just copy the default template and make a slight
change to it.
No functional changes are intended, but I cannot rule out that I did no
mistakes.
Signed-off-by: Uli Schlachter <psychon@znc.in>
LGI truncates GVariant bytestring instances at the first embedded \0
byte when using .value for "unwrapping". This commit works around that
problem by avoiding the .value API for accessing the image data [0].
Thanks a lot to Will Dietz for finding this problem and for providing a
preliminary patch fixing the problem. That saved me a lot of time [1].
[0]: https://github.com/pavouk/lgi/pull/223
[1]: eecdeb7d46
Signed-off-by: Uli Schlachter <psychon@znc.in>
This starts the switch from our own, semi-broken DBus bindings to using
the sane bindings that Gio provides.
Part-of: https://github.com/awesomeWM/awesome/issues/1093
Signed-off-by: Uli Schlachter <psychon@znc.in>
* Fixed input_passthrough property not being set
In the table of properties supplied to the `wibox` function, you couldn't set the `input_passthrough` property. You could only set it after the wibox was created like this: `my_shlick_wibox.input_passthrough = true`. This commit fixes that and now you can set it in both ways.
When you call `reset_timeout` on a notification with 0 timeout and thus no timer, a nil field error occures.
(can be tested with `awesome-client 'require"naughty".notification{message="TEST",timeout=0}:reset_timeout()'`)
Everywhere else in similar places (even at the beginning of the `reset_timeout`) the `self.timer` field is checked so i guess it was just forgotten there.
There is not much good reason why this should be required and making it
optional is almost trivial, as this patch shows.
Signed-off-by: Uli Schlachter <psychon@znc.in>
GLib has an internal pseudo-RNG that it initialises from /dev/urandom.
This commit adds code that uses this RNG to initialise various random
number generators that can be used by Lua.
This also removes some Lua code that initialises the random number
generator badly.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously, it would create a new object. The leaves the old
`replaces_id` logic mostly intact for now to keep the full backward
compatibility. I don't think anybody would have noticed the changed, by
time and time again we had proof that some silent users have some
amazing and advanced code hidden somewhere. It could be cleaned later
when breaking compatibility isn't an issue.
When the mouse is over or a keyboard driven menu is open, avoid
unexpected expiration to mess with the current notifications.
This commit also improve the `suspended` behavior to correctly
emit some signals.
The current API is non-compliant with the 1.0 spec and cannot represent
the v1.2 spec at all. The pair of name and callback fails to represent
the explicit ordering and cannot support the icons cleanly.
Plus to support the keyboard navigation use case, the notification
action need to be able to get some sort of focus state. Having an
object makes this easy.
In Lua 5.1, xpcall() has exactly two arguments: The function to call and
the error handler. Everywhere else, xpcall() passes extra arguments on
to the function to call. This includes LuaJIT, however since LuaJIT sets
_VERSION to "Lua 5.1", so far gears.protected_call used the workaround
for Lua 5.1 here.
This commit switches gears.protected_call to actually test for this
feature instead of just guessing based on _VERSION. Thus, this now also
uses the better code with LuaJIT.
Signed-off-by: Uli Schlachter <psychon@znc.in>
https://github.com/awesomeWM/awesome/issues/2596
Re-matched regex used elsewhere & updated test cases for "." in filename
Allowed for alternative extensions to be found even if specified
Reverted the change of behaviour but adjusted code for readability
Small readability change
Avoided delay searches that would never work
Untabify
Reverted possible [unlikely/undesired] behaviour changes
Untabify
Commit ba75da7976 worked around a bug in LGI. However, it did so by
just dropping the code that set the foreground color. Instead, it should
have changed the code so that cr:set_source() is only called if the
background container has a foreground color configured instead of "just
always".
Fixes: https://github.com/awesomeWM/awesome/pull/2609#issuecomment-459580395
Signed-off-by: Uli Schlachter <psychon@znc.in>
When $SOURCE_DIRECTORY is set, we are most likely currently running the
examples test, i.e. generating images. These images end up in the
documentation.
To make the images reproducable, i.e. independent from the current time,
this commit makes the textclock honor $SOURCE_DATE_EPOCH if
$SOURCE_DIRECTORY is set.
See commit 9d7eaf02 for some more details.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The current `awful.widget.layoutlist` is a fork of the so far uncommitted `naughty.widget.actionlist`. It was created because some of the support code for the new `naughty` implementation needed "easier to merge" usage examples. The `layoutlist` was chosen because it was both a low hanging fruit and genuinely useful.
cairo_get_source() is not bound correctly, leading to use-after-free
bugs. Cairo catches this and crashes.
Work around this by preserving the current source in a different way.
Instead of using cairo_get_source() and later cairo_set_source(), this
commit wraps everything that changes the current source between
cairo_save() and cairo_restore(). Thus, cairo saves the current source
for us without us having to grab an explicit reference.
Works-around: https://github.com/pavouk/lgi/issues/210
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously, the background container "just" used the shape and drew a
line around it. This means that half the line will be inside of the
shape and half of it will be outside. Thus, this hides the actual shape
that is used.
This commit changes that so that the line is added outside of the shape.
It does this via some tricks:
- In :before_draw_children(), :push_group() is used to redirect drawing
of the child widget to a temporary surface.
- In :after_draw_children(), the border is added to this group.
+ For this, another temporary surface is created. It will be used as a
mask.
+ The inside of the shape on this mask is cleared, everything else is
filled. Thus, the mask now contains everything "not content".
+ Everything inside the mask is filled with the background color.
- Also in :after_draw_children(), the group is drawn to the actual
target surface.
+ Again, this needs a mask.
+ This time, we draw the shape to the mask with twice the border width.
Thus, half of this line will be outside of the shape.
+ Then, the shape itself is also filled so that the mask contains the
shape and the border.
+ This mask is then used to copy the right parts of the temporary
surface were the child widget and border was drawn to the actual
target surface that will be visible on screen.
This approach has some upsides. Because we no longer have "half the
border" above content, colors with some transparency work fine for the
border. Also, this should avoid issues with anti-aliasing, because e.g.
the border is not just drawn with the border width, but also further out
to everything else so that the background cannot "bleed through".
Fixes: https://github.com/awesomeWM/awesome/issues/2516
Signed-off-by: Uli Schlachter <psychon@znc.in>
This module is half way between the tooltip and the raw wibox.
It supports the following features:
* Auto resize to its widget size
* Support parent objects and placement
Fix#1683
If the `layouts` are set during initialization, `t.layout` will
return `floating` if `t.layouts` is added before `t.layout`. By
using the raw layout, the fallback doesn't kicks in.
Commit ac8af66005 added beautiful.theme_path, which is used to save the
directory that contains the theme file that was loaded. Just two months
later, commit ca12473584 broke this code by adding a __newindex
metamethod. This caused the assignment to beautiful.theme_path to be
redirected to the theme. However, the theme is immediately replaced by
beautiful.init() after setting up the theme_path, so this assignment got
lost.
Fix this by using rawset() to bypass the metamethod.
Fixes: https://github.com/awesomeWM/awesome/issues/2573
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before this commit, it was added by `wibox.widget.base` if
`:setup()` is used. However it doesn't work for the `awful.popup`
because of the extra indirection.
This commit stops the monkey-patching and make sure the function
always exists. This doesn't prevent it from not working and in
the long run this should still be moved into the hierarchy.
However for now it makes the situation a lot more consistent and is a
quick band-aid without too much controversy.
Mitigate #2181
Given they are all small, it makes more sense to just merge them like
we did for the client API
For some reasons GTK doesn't want to be merged. To be investigated.
Given noone understand this code, this will prevent some semi likely
regressions from going unnoticed. The main risk is the shims not
producing the exact same results as the real implementation and
cause different code paths to be taken.
As of this commit, both the "real" and "shim" implementation were given
the same set of tests with print() at every step of next_to. The
resulting log was then checksummed to ensure both are identical.
It also add some properties such as `border_width`, `border_color`
and `preferred_alignments`.
It also fix a documentation bug where the `margin_topleft` was called
`margins_topleft`. To conform to the documentation, both are now valid
but one should be removed the next time the API changes.
Fixes#1978
By passing the geometry, important information used by
awful.placement.next_to were "lost". Given `next_to` supports both
widget position, the mouse and client/wibox relative positioning, it
has to know the object type.
This removes unused public functions from menubar.utils. This is not an
API break, because these functions were only added in commit
8d34201ec3, which is after v4.2. These new functions became
unused in commit e88f1e8735, not long after they were added.
Signed-off-by: Uli Schlachter <psychon@znc.in>
It is not possible to distribute 100px to three widgets equally. The
current version of wibox.layout.flex tries to do that anyway, by giving
each widget 33px and leaving one pixel outside of any widget. Thus, if
the widgets e.g. have a common background, this leads to a one pixel gap
in the background.
This patch changes the flex layout so that the extra pixel is assigned
to some widget instead. It does so by basically keeping a sum of
space_per_item for the widgets that was assigned so far. This sum is
rounded and when this leads to rounding, the corresponding child widget
gets an extra pixel.
More precisely, this tracks a pos as before. Widgets get their position
still assigned based on rounding pos. However, this now also remembers
this rounded position for the next iteration of the loop. This allows to
assign the size of widgets based on the difference between the current
and last rounded position.
(Possibly) fixes: https://github.com/awesomeWM/awesome/issues/2461
Signed-off-by: Uli Schlachter <psychon@znc.in>
Update lib/awful/hotkeys_popup/widget.lua
Update lib/awful/hotkeys_popup/widget.lua
fix(awful: hotkeys_popup): caching issue if showing the same widget instance with and without AwesomeWM hotkeys
doc(awful: hotkeys_popup): extend docstring for args.show_awesome_keys
When calling join with e.g. arguments (nil, {"a"}), then everything past
the nil was ignored, because the code internally used ipairs() to
iterate over the arguments and this stops at the first nil it
encounters.
Fix this by using select() to iterate over the arguments.
This also adds a unit test for this problem.
Signed-off-by: Uli Schlachter <psychon@znc.in>
In the earlier revision of the keygrabber PR, there was a `release_key`
and it was suggested to rename it `stop_key`. However its sibling
`release_event` wasn't, so it is now confusing.
The commit adds a mild deprecation codepath to avoid breaking configs
based on git-master. However it isn't a "long term" deprecation notice
and the code can probably be removed in 5.0 without further delay.
Previously, the layout list was global. However it wasn't covering all
possible use cases and make using `awful.widget.layoutlist` hard since
a layout could be excluded from the `awful.layout.layouts` but still
used for a tag (by setting it explicitly).
Until now there wasn't much documentation available about how to use
these properties. With the new work on `awful.spawn` that rely more and
more on `awful.rules` integration, it is worth fixing.
This commit add a new documentation section and a future commit will
aggregate them to generate an index.
When mangling notifications via naughty.config.notify_callback it is
advised (1) to return nil to reject a notification. The underlaying dbus
library tries to access a field of that notification table and fails.
(1) https://awesomewm.org/doc/api/libraries/naughty.html
The toggle/show/hide function were incompatible with the current
`rc.lua` is `titlebars_enabled` was removed from the rules because
they were never created. This has always been the case but the
introduction os `request::titlebars` in Awesome 4.0 allows to solve
this longstanding issue. However until now it didn't.
Fix#2419
If the history file (or its parents) can't be created, running a command
will fail entirely. Since saving command history is not an integral part
of running a command, it would be nicer if it carried on, just without
saving history. This is what shells usually do.
This patch removes assertions in the history saving function and
instead adds an early return, so if the history isn't saved the command
invocation simply carries on.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
This commit adds a way to leverage the xproperty and startup_id APIs
to persist an execution token across restarts. It allows to use
`awful.rules` on clients that were executed by a previous Awesome
instance.
The main limitations of these methods is the lack of entropy used to
build the token. If the command is the same in multiple
`awful.spawn.once`, then it will not work as expected. To mitigate this
issue, the system try to concatenate the `awful.rules` table after the
command and hash the resulting string. Given rules are a table, it can
have loops and/or issues with keys ordering. The hash function sort and
limite recursion to prevent a stack overflow. Another issue is the
unreliability of startup notifications.
`pairs` order isn't defined and `{...}` will always be ordered.
There is no reason to have random behavior where it can be
predicted at no additional cost.
The awful.placement.no_offscreen function did not work properly when
composed with other placement functions; in particular, the default
configuration (awful.placement.no_overlap+awful.placement.no_offscreen)
was broken. The compose function sets args.pretend=true and puts the
result of the previous placement function into args.override_geometry
before calling the next placement function, but no_offscreen did not use
args.override_geometry, therefore the result of the previous placement
function was discarded.
All other placement functions use `geometry_common(c, args)` to get the
current client geometry; `area_common(c)` should be used only when
getting geometry of other clients.
This change also fixes the problem with margin handling (adding margins
should not affect the window size, only the window position should
change); the test output which was adjusted in commit 0275d3537d
is adjusted again to account for this change.
Signed-off-by: Sergey Vlasov <sigprof@gmail.com>
The awful.placement.no_overlap function was adding the window border
width to the client width and height (this is performed in
area_common(), which is called by geometry_common()), but did not
reverse this operation by calling remove_border() before returning the
final geometry; because of this, using no_overlap resulted in increasing
the window width and height by 2*border_width.
The bug was probably introduced in commit ebcc19844e (before
that commit no_overlap changed the window position directly instead of
relying on the new placement infrastructure), but was not noticed
because of other problems (e.g., in the default configuration the result
of no_overlap was overridden by the buggy no_offscreen).
Signed-off-by: Sergey Vlasov <sigprof@gmail.com>
The current taglist/tasklist allow filter function to remove elements
from the list. However they don't allow sorting or additional entries
to be listed.
This commit introduced such a concept. It will later be used by the
layoutlist where it becomes more relevant since layouts are used created
"objects".
This property is based on Motif WM hints and checks if the client
requests that it is not decorated with a titlebar.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When an icon is sent over dbus, we turn this into a cairo ImageSurface.
This is done by turning the actual icon data into a string and using
cairo.ImageSurface.create_for_data() to create a surface for this data.
However, this function only creates an ImageSurface that refers to this
data. It does not copy the data. Thus, when the Lua GC later frees the
string, we have a cairo surface that refers to already-freed data.
Fix this by duplicating the cairo surface, which makes cairo create a
copy of the data. Then, we finish the original surface. While doing
this, the string is kept alive in a local variable.
(Possibly) Fixes: https://github.com/awesomeWM/awesome/issues/2361
Signed-off-by: Uli Schlachter <psychon@znc.in>
When a tag is specified by name, awful.rules only searched for the tag
on the client's screen. This commit extends the search to all screens,
but only if no specific screen was specified for the new client by some
rule.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The typo was introduced in commit a1941efc9.
Its effect should be minimal: :item_enter() itself does not care about
the 'mouse' option, but it forwards to :exec(). Here, an action is
invoked either if it was not caused by the mouse, or if it was caused by
the mouse and either auto_expand is enabled (which is the default), or
the item-to-be-executed is actually the active item.
In other words, it is quite non-trivial to come up with a case where
this typo made a difference. But of course that's no reason to leave the
typo in.
Fixes: https://github.com/awesomeWM/awesome/issues/2347
Signed-off-by: Uli Schlachter <psychon@znc.in>
The old keygrabber API wasn't doing what the users want from a
keygrabber module. With tons of boilerplate code, everything could
be done, but it wasn't trivial.
This commit add a default grabber function that implements the
keybinding API already used by `awful.key` and `awful.prompt`.
It also add syntax candy left and right to make the module "feel"
like a native CAPI object.
Nothing is perfect and some parts, like adding root keybindings, are not
vevy pleasing. However it fulfill its goal when it comes to make
previously non-trivial use case very easy to implement and deploy.
This code was attached to mouse::enter in `rc.lua` instead of being part
of the unified request::activate architecture.
There is currently no way to detach this focus filter because it is
generally correct.
There is currently no centralized way to manage active keybindings so
the description data case be used to fill part of that role until an
official API is added.
Layouts work with the client's geometry in "space on screen that is
assigned to this client". This means that the geometry should include
decoration (titlebar and borders) and useless gaps.
Everything else (especially the C code) works with client's geometry in
"space that the client can draw on". This means that the titlebar,
borders and the useless gaps are not included into this size.
Thus, when applying size hints, the tile layout has to convert between
these two representations. Otherwise, size hints are applied incorrectly
and to a wrong geometry.
Fixes: https://github.com/awesomeWM/awesome/issues/1418
Signed-off-by: Uli Schlachter <psychon@znc.in>
I do not know how a GDataInputStream / GBufferedInputStream decides
about the size of its internal buffer when reading input by line, but in
issue #2288, an example where the output of date (about 30 bytes) was
read ten times per second caused ten megabytes of memory usage for this
internal buffer. Try to save some memory by explicitly shrinking the
buffer size when we are done reading from the stream.
Reference: https://github.com/awesomeWM/awesome/issues/2288
Signed-off-by: Uli Schlachter <psychon@znc.in>
Emmanuel Lepage Vallee
laith-m0
mergify[bot]
Uli Schlachter
Uli Schlachter
Daniel Hahler
Sergey Vlasov
Robert Andrew Ditthardt
Vishnunarayan K I
worron
Michael Beaumont
fREW Schmidt
fREW Schmidt
Hùng
zsugabubus
Will Dietz
Will Dietz
mergify[bot]
Adrian Gabriel
Anton Bulakh
Alphonse Mariya
Daniel Hahler
Sorky
Sorky
warptozero
Kevin Zander
Aire-One
glenvt18
Yauhen Kirylau
Peter Nerlich
Michele Lazzeri
tototest99
Aire-One
gabriel klawitter
Alyssa Ross
Michael Perlov
Peter Kasza
Mak Kolybabi
Laszlo Toth
Sam Banks
Rastislav Barlik
Anatolii Aniskovych