EWMH specifies that
If _NET_WM_WINDOW_TYPE is not set, then managed windows with WM_TRANSIENT_FOR
set MUST be taken as [_NET_WM_WINDOW_TYPE_DIALOG].
We implement this by forcing a window's type to be "dialog" when it has a
WM_TRANSIENT_FOR property. For windows that have a _NET_WM_WINDOW_TYPE property,
this type change is then later undone. However, when a window changes its
WM_TRANSIENT_FOR property during runtime, then we would set its type to "dialog"
unconditionally.
This commit fixes this by explicitly tracking if we found a _NET_WM_WINDOW_TYPE
property on the window and only applying the fallback if we did not find such a
property.
Fixes-one-of-the-sub-issues-from: https://github.com/awesomeWM/awesome/issues/889
Signed-off-by: Uli Schlachter <psychon@znc.in>
Instead of focusing the root window, we now create a "focus window" inside of
our frame window. This window is placed so that it is not visible, but we can
grab key bindings on it to simulate the window having the input focus.
Fixes: https://github.com/awesomeWM/awesome/issues/699
Signed-off-by: Uli Schlachter <psychon@znc.in>
When we manage the transient before the main window, the client object's
.transient_for property would stay nil. This happens because the property points
to a window which we don't know (yet) and thus is ignored.
Fix this by remembering the value of WM_TRANSIENT_FOR and checking in
client_manage() if the new client is the "missing window we did not find
before".
Fixes: https://github.com/awesomeWM/awesome/issues/181
Signed-off-by: Uli Schlachter <psychon@znc.in>
This creates a new helper function for setting the transient_for property of a
client. This is a preparation for a following commit. No behaviour changes
intended.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allow layout "arrange" to be called less often and react on
the cause of the change itself rather than it's consequences
(usually, the "focus" signal).
Previously, the layout were re-arranged everytime the focus changed.
Now, with "raised" and "lowered", it require less "arrange".
"swapped" allow smarted layouts. Currently, swapped cause a full
re-arrange. It re-read the "index" list from scratch and create
a "new" layout. With "swapped", incremental layout changes are
possible.
Fixes https://github.com/awesomeWM/awesome/issues/616
Fun fact: ICCCM specifies that icon_pixmap must have depth 1. Xterm uses a
pixmap with depth 24. Yay... As such, I don't have any test for the depth == 1
case and will just assume that it does the right thing. If it doesn't, I bet no
one will notice anyway.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Every .c file has to include the corresponding .h file first to make sure the
headers are self-contained. Additionally, this moves some unneeded includes
around.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously, ownership of the pixmaps that we are using for double buffering was
a little weird. The pixmap belonged to the drawin/titlebar, but the
corresponding cairo surface was owned by the drawable. Clean this up by moving
the pixmap to the drawable.
This cleans up lots of ugly code and also fixes a crash: When a drawable was
garbage collected before its drawin, drawin_wipe() would crash accessing the
drawable. This was needed to make it forget about the cairo surface we gave to
it for the pixmap that is being destroyed.
By moving the pixmap to the drawable, this whole issues goes away.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Whenever a titlebar of a client needed to be refreshed, all (possibly) four
titlebars would get completely refreshed. So if someone actually added more than
one titlebar to a client, awesome would copy each titlebar's content to the
window four times. Fix this by introducing more fine-grined functions for
uploads.
This also makes awesome only update the affected area when it gets an expose
event for a titlebar instead of all four titlebars completely.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allow to spawn something, then apply some properties or rules when
the client show up ("manage").
This commit add:
* "startup_id" property for all clients object (immutable, can be nil)
* Second return value to awful.util.spawn() with the startup_id
* Update the documentation
Example:
local wait_for_it = {}
local pid,snid = awful.util.spawn("urxvtc")
wait_for_it[snid] = {ontop=true,sticky=false,
tag = awful.tag.gettags(mouse.screen)[1] }
client.connect_signal("manage", function (c, startup)
if c.startup_id and wait_for_it[c.startup_id] then
for k,v in pairs(wait_for_it[c.startup_id]) do
c[k] = v
end
if wait_for_it[c.startup_id].tag then
c:tags({wait_for_it[c.startup_id].tag})
end
end
end)
Signed-off-by: Uli Schlachter <psychon@znc.in>
This reverts commit a54636751b.
We now have the new xproperty API which does the same thing in a much nicer way.
Thanks to Elv13 for the idea!
Signed-off-by: Uli Schlachter <psychon@znc.in>
Having this in lua means that size hints are only applied after the client got
resized. The bad side effect of this is some flickering if awesome is being
slow. And apparently, it is slow for way too many people...
Signed-off-by: Uli Schlachter <psychon@znc.in>
The code was sending out ConfigureNotify events which contained the size of the
frame window. Thus, the client assumed that it is was larger than it actually
was.
Fix this by subtracting the size of the titlebars from the geometry for the
event.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit makes it possible to add titlebars to a client. These titlebars are
drawables.
The drawin's input handling is moved to the drawable. This allows it to use the
same code for drawin and titlebar input handling, although there are lots of
differences between the two on the C side.
On the lua side, a new wibox.drawable module is created which handles all the
drawable-specific magic and which can also be used for titlebars.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Now that the C code uses lightuserdata for passing around cairo surfaces, they
are no longer automatically garbage collected. To avoid memleaks, this commit
compares the C code to use cairo_surface_t pointers instead of the lua stack.
This also fixes a memleak were a client's icon was leaked.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This option is no longer valid in modelines, so it has been removed from
all modelines using the following shellscript:
#!/bin/ksh
git ls-tree -r HEAD | cut -f2 | while read f; do
egrep -e '^(//|--) vim: .*encoding=' $f >/dev/null || continue
sed -E -e '/^(\/\/|--) vim:/s/:encoding=utf-8//' $f > /tmp/foo
mv /tmp/foo $f
done
Signed-off-by: Gregor Best <gbe@ring0.de>
Signed-off-by: Uli Schlachter <psychon@znc.in>
xcb-util is now split into several repositories since 0.3.8. This
release also cleaned up the API a lot, thus update the code
accordingly.
Signed-off-by: Arnaud Fontaine <arnau@debian.org>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Both client_isvisible() and client_maybevisible() where almost exclusively
called with the client's screen as their second argument. Remove this second
argument and let these functions instead always act on the client's screen.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There isn't much point in the screen property of a drawin because the geometry
already defines on which screen the drawin is.
The biggest chunk of changes from this is due to removing the functions
drawin_detach and drawin_attach which where called when the screen property was
set/unset.
The code from drawin_detach is moved into drawin_set_visible and drawin_wipe.
drawin_attach is moved into drawin_init.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Instead of immediately setting the X11 input focus when client.focus is assigned
something, we now just remember that we'll have to do something later. The focus
is then set in the next prepare call by libev (= after the current main loop run
is done).
Signed-off-by: Uli Schlachter <psychon@znc.in>
When we receive a DestroyNotify, we have to unmanage the client. However, we
were just informed that the window was destroyed, so it doesn't make sense to
try to do "something" with the window.
This commits fixes some errors from the X server (which we ignored, but still
they are gone now).
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes awesome support only a single X11 protocol screen. If you are still
using zaphod mode, you can run multiple instances of awesome on the single
screens, e.g.:
DISPLAY=:1.0 awesome & DISPLAY=:1.1 awesome &
Signed-off-by: Uli Schlachter <psychon@znc.in>
This splits up client_getbywin() into two different functions. One of them finds
a client by its frame window, the other checks against the client's own window.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Each window is now reparented under a window created by awesome. This window is
NOT visible, this commit should not cause any visible differences. Instead, this
is done to work around problems with X11.
The only alternative would be to ban windows by moving them offscreen which is
ugly in itself and breaks pagers. Doing it like this seems to be the better
solution.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Uli Schlachter
Daniel Hahler
Emmanuel Lepage Vallee
Daniel Hahler
David Mohr
Gregor Best
Arnaud Fontaine
Julien Danjou