The entry "gtk+3.0" caused the following to happen:
Note, selecting 'libcanberra-gtk3-0-dbg' for regex 'gtk+3.0'
Note, selecting 'monodoc-gtk3.0-manual' for regex 'gtk+3.0'
Note, selecting 'libgtk3.0-cil' for regex 'gtk+3.0'
Note, selecting 'libavahi-ui-gtk3-0' for regex 'gtk+3.0'
Note, selecting 'libwxgtk3.0-0-dbg' for regex 'gtk+3.0'
Note, selecting 'libseed-gtk3-0' for regex 'gtk+3.0'
Note, selecting 'libgtk3.0-cil-dev' for regex 'gtk+3.0'
Note, selecting 'libcanberra-gtk3-0' for regex 'gtk+3.0'
Note, selecting 'libinfgtk3-0.5-0' for regex 'gtk+3.0'
Note, selecting 'libwxgtk3.0-0' for regex 'gtk+3.0'
Note, selecting 'gir1.2-dbusmenu-gtk3-0.4' for regex 'gtk+3.0'
Note, selecting 'libwxgtk3.0-dev' for regex 'gtk+3.0'
This was clearly not intended. Fix this by using gir1.2-gtk-3.0 instead,
which is what we actually want (GObject introspection data for GTK 3).
This pretty much reverts commit 30a527fcfd.
Signed-off-by: Uli Schlachter <psychon@znc.in>
* Move table functions out of awful.util into new gears.table
* travis: Use v9999 prefix for full requests
Make sure no newly deprecated functions are used
* Move all `awful.util.table.*` calls to `gears.table.*` calls
Move table test functions from awful/util_spec to new gears/table_spec
Change awful.util.subsets call to gears.math.subsets in awful/key.lua
For loading a theme, beautiful.init() has to be called. We do not handle
dynamic changes of the theme, so if the theme is changed after something
was already queried, this change will not apply. This also means that
before the theme is loaded, nothing useful can be returned. In fact,
code that tries to access the theme during require() will never get a
useful value from beautiful, but just nils.
To catch this, one Travis build is modified so that an error is raised
if the theme is accessed before beautiful.init() was called.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Currently, "everything can require everything". It's an unstructured
mess which sometimes causes problems.
This commit adds a tool that enforces a white-list of require() uses. It
uses depgraph to scan the source code and then each use of require()
that is found is checked. If any violations are found, the tool returns
a failure.
This tool is wired up to a new target "make check-requires" which is
included in "make check". Thus, Travis will run this.
Reference: https://github.com/awesomeWM/awesome/issues/1400
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allows for `DO_COVERAGE=1 make check` with local tests (where
`CI=true` is not given).
It uses the new environment variables to configure the default theme,
instead of creating a temporary config/theme.
- checkout previous commit, so the coverage upload uses the current
code
- do not run coverage reports when testing previous commits
- improve failure message: display subject/author/name for each commit
- Execute the tests without compiling, and don't mess with the source
files when coverage is enabled.
This ensures that the coverage report lines are correct.
This disables the doc tests, as their results would be unused.
Hack: it still expands macros on util.lua, because of
`util.get_themes_dir()` and `util.get_awesome_icon_dir()`, which might
be moved later. Ref:
https://github.com/awesomeWM/awesome/pull/1239#discussion_r93828178.
- ensure that BUILD_APIDOC and DO_COVERAGE are not used together
- awesomeConfig.cmake: add DO_COVERAGE as an option
- Travis: only install codecov with DO_COVERAGE=codecov
- Travis: do not use set -v; use set -x with DO_COVERAGE
- do not use trailing slashes with dirs in tests/examples/CMakeLists.txt / .luacov
- Use latest luacov (0.12.0-1) again
This reverts parts of 4cc6a815.
I think it is better to fix any failure that 4cc6a815 tried to work around.
- Travis: simplify/fix require('luacov') for functionaltests
- tests/examples/CMakeLists.txt: resolve ../.. in SOURCE_DIR
- tests/examples/CMakeLists.txt: add DO_COVERAGE to env
- Cleanup/simplify .luacov: work with SOURCE_DIRECTORY alone
- tests/run.sh: pass through / set SOURCE_DIRECTORY when running awesome
- tests/run.sh: resolve source_dir
- use DO_COVERAGE from env only
This also helps to easier spot failures because of this when looking
at the build matrix.
- Add new check-qa target, to be run only once.
- Add explicit check-unit-coverage target, used with DO_COVERAGE.
Instead of using Xlib for parsing resource files, this now uses the
dedicated xcb-based library that is meant for exactly this task.
Fixes: https://github.com/awesomeWM/awesome/issues/1176
Signed-off-by: Uli Schlachter <psychon@znc.in>
The build is no longer aborted when one of the "example tests" produces a
message on stderr. However, on Travis this requirement is still made. This
should catch "bad errors" via Travis while not breaking the build for users.
Fixes: https://github.com/awesomeWM/awesome/issues/821
Signed-off-by: Uli Schlachter <psychon@znc.in>
With luacov 0.12.0-1 our travis build fails. It was always kinda broken, but now
this breakage is revealed.
What likely happens: Our .luacov errors out because some needed environment
variable to figure out where to put the results is not set. Due to the way we
load luacov, it runs with its default config which luckily happens to work. With
luacov 0.12.0-1 the error is propagated instead and the build fails.
Signed-off-by: Uli Schlachter <psychon@znc.in>
As the documentation generation insert increasingly large ammount
of code into the lua files, the coverage data is getting less and
less accurate. This try to fix this by only collecting such data
after the `configure_file` calls are done.
This defines some assertions in Lua that should catch API misuses. It might be
that Lua is a bit slower due to this, but so what?
Fixes: https://github.com/awesomeWM/awesome/issues/740
Signed-off-by: Uli Schlachter <psychon@znc.in>
While still being used via Travis' `secure` env mechanism, we could
additionally set it through an env for the repo (not displayed by
default), and revoke/regenerate it when it gets revealed.
The token provides access only to the `apidoc` repo.
Closes https://github.com/awesomeWM/awesome/pull/866.
This commit adds a new "luacheck" target to the Makefiles. This target is
automatically included in "make check" when luacheck is found in $PATH.
Additionally, this includes luacheck in Travis so that the build fails when
luacheck complains about something.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Lua 5.3's build system provides the LUA_COMPAT_5_2 and LUA_COMPAT_5_1 defines to
enable some compatibility with these older Lua versions. LUA_COMPAT_5_2 is
defined by default while LUA_COMPAT_5_1 is not.
This commit also disables LUA_COMPAT_5_2 on the Lua version that we build on
Travis so that the build will hopefully break if some feature is used that was
removed.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Lots of our code depends on the C API and thus can only be tested when that is
available. Hence, it makes sense to also run the functional tests under LuaCov.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This also removes some obsolete dependencies and it also and creates
`/usr/bin/lua` even when using luajit. Without this, our lgi-check.sh
script complains about a missing lgi installation because it cannot find
a lua binary.
Closes https://github.com/awesomeWM/awesome/pull/652.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When using `spawn` without startup notification support, the
`startup_id` property on the client should be nil.
This adds rxvt-unicode to the Travis build, because it supports startup
notifications, but xterm does not. We should replace xterm with it in
the existing tests then later.
This refactors the env vars for the build matrix:
- add LUANAME
- drop LUALIB
- add LUAINCLUDE for special luajit include dir.
- add LUAROCKS_ARGS for luarocks' `configure --lua-suffix=jit-2.0.0-beta9`.
Closes https://github.com/awesomeWM/awesome/pull/484.
This moves the apidoc uploading to build-utils/travis-apidoc.sh, which
makes it more pleasant to maintain/read.
Additional enhancements:
- handle all branches and PRs, and provide compare view links as a comment
for the latter, via awesome-robot. This gets skipped for PRs for
forks, because then the Github secret is not available for security
reasons.
- use a merge commit to keep relevant changes and boilerplate together.
- simplified/shorter AWESOME_VERSION override.
- add last commit message of the repo to the apidoc's commit message.
Closes https://github.com/awesomeWM/awesome/pull/358.
It uses "diff -I .." to check if there are relevant changes, and then adds
them in two separate commits. This allows to more easily see real changes to
the documentation.
This builds and installs awesome (which runs its checks) and displays
--version.
- Build libxcb-cursor-dev and lua-lgi manually.
- A lot of dependencies are installed manually from Git or luarocks.
- Include Travis status in README.
Closes https://github.com/awesomeWM/awesome/pull/208.
Uli Schlachter
Kevin Zander
Uli Schlachter
Daniel Hahler
Emmanuel Lepage Vallee
Daniel Hahler
Uli Schlachter
Frederik