Previously it would print a table which would include the memory
location where the table was stored. Thus, this produces a different
result on every build.
Signed-off-by: Uli Schlachter <psychon@znc.in>
tests/run.sh waits for awesome to exit via tail's "--pid" option. This
makes tail check once per second if the process still exists and if not,
tail will exit. However, the default of "once per second" causes lots of
wasted time for us.
This commit adds the argument "-s 0.1" to tail which makes tail check
once every 0.1 seconds. This commit changes the time that "tests/run.sh"
runs on Travis from about 60 seconds to about 35 seconds, which is a big
improvement.
Closes: https://github.com/awesomeWM/awesome/issues/1374
Signed-off-by: Uli Schlachter <psychon@znc.in>
When the keyboard layout is modified via xmodmap, each single "change"
(line of input to xmodmap) causes an "the keyboard configuration
changed"-event to be sent. Awesome reacted to each of these events by
reloading the keyboard layout. Thus, awesome reloaded the keyboard
layout a lot and appeared to freeze.
Fix this by asynchronously update the keyboard state: When such an event
comes in, instead of reloading things immediately, we set a flag which
makes us update the state at the end of the main loop iteration. This
means that many events still cause only a single (or at least few)
re-quering of the layout. Thus, a lot of time is saved.
This commit removes the argument to the (undocumented!) signal
xkb::group_changed. Previously, the argument was the active group
number. Since this argument was unused and I'm lazy, I just removed it.
The alternative would be that it might be visible to Lua that some "the
active group changed"-events are dropped.
Fixes: https://github.com/awesomeWM/awesome/issues/1494
Signed-off-by: Uli Schlachter <psychon@znc.in>
* Move table functions out of awful.util into new gears.table
* travis: Use v9999 prefix for full requests
Make sure no newly deprecated functions are used
* Move all `awful.util.table.*` calls to `gears.table.*` calls
Move table test functions from awful/util_spec to new gears/table_spec
Change awful.util.subsets call to gears.math.subsets in awful/key.lua
This makes the scroll and only_on_screen widgets appear in the widget
lists. The examples are not really helpful, but Elv13 told me to add
them. Also, only_on_screen is in awful.widget, but now something in
tests/examples/wibox/container refers to it...
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit add an option to shim the whole wibox module when
running multi-screen tests. This is intended to lower the test
runtime when coverage is enabled.
In theory, most of that code is already covered by the
test-screen-changes suit.
This makes the coverage builds about twice as fast. This is
necessary because there is a large number of timeouts due to
limited resources on the Travis build system.
And stop listening to property::geometry, it's no longer needed.
This also remove messing up the border without saving it
somewhere. The concept is sound, but not the implementation.
In Gtk 2, the "first" argument to set_geometry_hints() is not optional.
However, this code does not provide any argument here. Improve the error
message in this case by checking for Gtk 3.
Reference: https://github.com/awesomeWM/awesome/issues/1495
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allows for `DO_COVERAGE=1 make check` with local tests (where
`CI=true` is not given).
It uses the new environment variables to configure the default theme,
instead of creating a temporary config/theme.
- Execute the tests without compiling, and don't mess with the source
files when coverage is enabled.
This ensures that the coverage report lines are correct.
This disables the doc tests, as their results would be unused.
Hack: it still expands macros on util.lua, because of
`util.get_themes_dir()` and `util.get_awesome_icon_dir()`, which might
be moved later. Ref:
https://github.com/awesomeWM/awesome/pull/1239#discussion_r93828178.
- ensure that BUILD_APIDOC and DO_COVERAGE are not used together
- awesomeConfig.cmake: add DO_COVERAGE as an option
- Travis: only install codecov with DO_COVERAGE=codecov
- Travis: do not use set -v; use set -x with DO_COVERAGE
- do not use trailing slashes with dirs in tests/examples/CMakeLists.txt / .luacov
- Use latest luacov (0.12.0-1) again
This reverts parts of 4cc6a815.
I think it is better to fix any failure that 4cc6a815 tried to work around.
- Travis: simplify/fix require('luacov') for functionaltests
- tests/examples/CMakeLists.txt: resolve ../.. in SOURCE_DIR
- tests/examples/CMakeLists.txt: add DO_COVERAGE to env
- Cleanup/simplify .luacov: work with SOURCE_DIRECTORY alone
- tests/run.sh: pass through / set SOURCE_DIRECTORY when running awesome
- tests/run.sh: resolve source_dir
- use DO_COVERAGE from env only
X11 does not allow to resize a window to size 0x0. Also, there are some
possibilities of integer overflows in our case. We tried to handle this
already, but there was a loop-hole: If the too-small-value is only
produced after applying size hints, then this was not caught.
Fix this by applying size hints before checking if the resulting size is
valid. However, this means some check needs to be duplicated to handle
the possibility of integer underflows while applying size hints.
Helps-with: https://github.com/awesomeWM/awesome/issues/1340
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a new argument to the test client spawning function that will
make the test client window set a resize increment property.
The API here is starting to a bit ugly, but since this is not any user
facing API, that should not be a problem.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Otherwise commented lines look like ---- My comment
instead of -- -- My comment. This wasn't a problem before the
intentation fix commit, but it is now.
Commit a944636c02 "bashified" tests/run.sh for some reason.
Afterwards, commit 4abd820051 fixed some of the fall-out.
However, there is still a problem left.
We have "set -e" in this script. Thus, whenever some command exits with
status 0, the script abort. When the variable errors is zero/unset, the
command "((errors++))" has exit status zero. Thus, this instruction
caused the shell script to abort. This was not intended.
Fix this by using "((++errors))" instead.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before this, the test runner used a timer which fired every 0.1 seconds
to "do its thing". Many of these waits seem unnecessary.
This commit makes the test runner wait 0 seconds for the first call of a
step function. Only following calls will have a timeout of 0.1 seconds
applied.
A full run of the test suite (tests/run.sh without further arguments)
took about 100 seconds before this change. After this change, we are
down to 60 seconds. This is almost factor two faster! (Well, five thirds
is the exact number, so factor 1.66)
(The numbers are best out of three runs. The "before" number is rounded
down while the "after" number is rounded up.)
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously we got the following unhelpful error message:
tests/_client.lua:98: bad argument #2 to 'assert' (string expected, got
userdata)
Signed-off-by: Uli Schlachter <psychon@znc.in>
This uses DOC_HIDE magic in the actual test code, except for the
template.lua files which do not have it.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The following commits will add DOC_HIDE uses that are not at the end of
the line, but the beginning. Hence, drop the requirement that it appears
at the end of the line and change the ".+" at the beginning into ".*".
Signed-off-by: Uli Schlachter <psychon@znc.in>
Copy-paste-y I was checking for the wrong result. Another unrelated
problem with the test runner caused me to miss this. Sorry!
Signed-off-by: Uli Schlachter <psychon@znc.in>
This removes a duplicate test and moves some "spawn with empty string as
argument" up to the long list of similar tests (and adds error
checking).
I do not see the point of the assert(#client.get() == 0) and so it was
just dropped.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Commit 5e6a893 broke error handling in awesome.spawn(): Instead of
returning an error message, it would just return its last argument.
This commit fixes that, removes some not-so-helpful warnings, and adds
lots of tests for this code.
Fixes: https://github.com/awesomeWM/awesome/issues/1281
Signed-off-by: Uli Schlachter <psychon@znc.in>
Locally I got this, where only two xterms were opened.
```
% tests/run.sh test-awesomerc.lua
awesome_log: /tmp/tmp.ToAKs6Gw4J/_awesome_test.log
== Running test-awesomerc.lua ==
Error: timeout waiting for signal in step 1/11 (@20).
===> ERROR running test-awesomerc.lua! <===
Error: timeout waiting for signal in step 1/11 (@20).
There were 1 errors!
```
This is a partial revert of commit 7901a1c647. The end result is the
same, but the change from that commit is reverted and instead the same
thing is done in a different way.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Ever since these files were added, these problems existed. I have no
idea what alt_fg is supposed to mean, but since a value of nil is
apparently ok, I just pass in nil directly.
Signed-off-by: Uli Schlachter <psychon@znc.in>
I really try to avoid doing this, psychon too, but enough is
enough. We don't have a solution and I would rather add more
tests that work than keeping a test that keep "failing" just
to remind us it's there.
Previously, the API to set the data that should be displayed was
:set_data(t) where t is a table. This table has the labels to use as its
keys and the numbers as its values. With this API, it was not possible
to influence the order in which the "pie pieces" were drawn.
This commit adds and uses a new API called :set_data_list(t). Here, t is
a table with integer keys and tables as values, thus one can iterate
over this with ipairs() and the order is well-defined. The tables used
as values contain the label as their first entry and the number as their
second entry.
Fixes: https://github.com/awesomeWM/awesome/issues/1249
Signed-off-by: Uli Schlachter <psychon@znc.in>
This test has a list of "things" that should be present in the output. This
table is iterated over via pairs(), which means that the output is
non-deterministic and the order of the entries is basically random.
Fix this by using ipairs() to get a deterministic iteration order. This requires
some slight change to the table that is iterated over.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This printed a table. This will make Lua print the address of the table and
hence the output of this test was non-deterministic.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There we go again... When hitting a slow CI node, there is again
timeouts when doing the multi-screen tests. As no solution to
bug leading to this has been found, the only thing to do is
increase the timeout.
Hopefully this commit will be reverted soon.
Spawn callbacks were never invoked when no startup-notification-rules were
given. This commit fixes the code so that "startup done" callbacks are also
called when no rules were given.
Fixes: https://github.com/awesomeWM/awesome/issues/1218
Signed-off-by: Uli Schlachter <psychon@znc.in>
Via this, I can set HEADLESS=1 in my wrapper-GNUMakefile that I use and
"make check" will no longer open a new window that gets in my way.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The code in luaA_client_swap() is incorrect, because
luaA_object_emit_signal() already pops the arguments to the signal.
Still, the code here tried to remove the arguments from the Lua stack
again, thereby corrupting the stack (removing more items than there are
in the stack).
Normally, popping more things from the stack than it has entries
silently corrupts the Lua stack. Apparently this doesn't necessarily
cause any immediate issues, because this code has been broken since nine
months and no one noticed. This mistakes was introduced in commit
55190646.
This issue was only noticed by accident. Thus, this commit also adds a
small integration test that exercises this bug. This test catches the
issue, but only on Travis, because there we are building our own version
of Lua 5.3 and that one has assertions enabled.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The usual "a or b"-trick to simulate C's ?:-operator does not work when
"false" is a valid value. Fix the code to handle this correctly and add
a short unit test which would have caught this problem.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The default config had tables like mywibox and mywibox[s] was the wibox
that is visible on screen s. When a screen is removed, nothing cleans up
these tables and so the screen and the wibox could not be garbage
collected. The same applies to the layoutbox, taglist etc.
This commit removes the global mywibox table and instead saves it as a
property on the screen. This way, the screen is not explicitly
referenced and when it is removed, the screen, its wibox and all of its
widgets become unreachable and can be garbage collected.
This commit also updates the docs and the tests that referenced things
(mostly the wibox) via mywibox[s] to now use s.mywibox.
Fixes: https://github.com/awesomeWM/awesome/issues/1125
Signed-off-by: Uli Schlachter <psychon@znc.in>
The new client is hopefully faster. Why, you ask?
Instead of spawning a new Lua process each time a test asks for a new window,
there is a "daemon process" which gets commands to open new windows from its
standard input. That way, Lua doesn't have to load LGI all the time and lots of
pointless work is skipped. The daemon process exits when its stdin is closed and
thus should automatically exit when awesome exits.
Fixes: https://github.com/awesomeWM/awesome/issues/1089
Signed-off-by: Uli Schlachter <psychon@znc.in>
This test changes the mouse cursor's position and afterwards has an
assert that checks something on the tooltip. This really looks a lot
like it expects the mouse cursor's position to be already updated and
its enter and leave events to be handled. However, this is now how
things actually work.
Fix this by moving the assert into its own step, so that in between the
normal main loop runs.
Signed-off-by: Uli Schlachter <psychon@znc.in>
run.sh waits for awesome's startup to be done by having awesome execute "return
1" via its dbus interface. However, by default dbus has a 25 second timeout
before it fails a dbus-send invocation. This defeats the purpose of this
exercise.
So instead of using awesome-client, this commit makes the code use dbus-send
directly and specifies a relative low reply timeout (which should still be
plenty so that this doesn't erroneously fail).
Signed-off-by: Uli Schlachter <psychon@znc.in>
The timeout utility guarantees an exit code of 124 when the process died due to
timeout. Since awesome only ever exits with 0 or 1, we can use this to reliably
detect timeouts and print a matching message.
Signed-off-by: Uli Schlachter <psychon@znc.in>
coreutils provides a timeout command. Use that instead of (badly) inventing our
own version of it. This "timeout" command seems to be new. Let's hope everyone
has it and think about alternative solutions only when needed.
Fixes: https://github.com/awesomeWM/awesome/issues/1075
Signed-off-by: Uli Schlachter <psychon@znc.in>
When awesome exits with a non-zero code, this is something interesting that we
should log. Do so.
The "set +e" / "set -e" dance is required so that we do not abort because the
wait builtin returns a non-zero code.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This script runs under "set -e", so any command exiting with a non-zero status
makes it abort. However, we do not care about failures from grep to find
anything, so handle that case gracefully.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before this commit: When we are GC'ing an object, we clear its metatable, since
otherwise crashes could occur in various places. This means that if someone
tries to use such an object, they get an unhelpful error message like "attempt
to index userdata object" and they don't understand what the problem is. Also,
this means that foo.valid does not actually work after GC.
This commit changes this behaviour. Instead of setting an empty metatable, we
now create a metatable with an __index and __newindex method. These metamethods
produce better error messages that they sat the underlying object was already
garbage collected. Better yet, the __index metamethod makes foo.valid be false
instead of causing an error, so that the existing machinery for detecting
invalid objects continues to work.
This commit also adds a functional test that verifies this behaviour.
Signed-off-by: Uli Schlachter <psychon@znc.in>
To ensure that some features such as SNID rules work, we need
to ensure that the screen isn't set by other code paths. Only
a single algorithm can be executed for the screen. As soon
as many algorithms are executed on events such as "manage", it
will most likely regress again.
This commit make sure of that by disabling the default normal source
of c.screen. After that, any other c.screen changes can be
considered bugs.
The code was written so that it assumes that disconnecting the last signal also
removed the corresponding entry in the signal array. This lead e.g. to an
index-out-of-bounds access in some cases.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The "test launching client on a specific screen" suit is very slow.
However, it is also necessary to avoid issues such as #1069 or #154
from regressing again.
This is a temporary fix until a faster test client "daemon" is
developped.
While testing using "the real deal" and with all the tests would be
better, it would add a lot of complexity to the testing framework.
This module generate multiple multi-screen scenarios and some obvious
issues that they can cause. Over time, as more steps are added, it
will provide "good enough" testing for multiple screens.
Individual test suits can require() this utility to replicate their
steps for each multi-screen scenarios.
This uses the new support introduced in f0f31bc305 in the docs and in
tests/run.sh, removing an useless use of cat/echo.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Uli Schlachter
Kevin Zander
Emmanuel Lepage Vallée
Uli Schlachter
getzze
Daniel Hahler
morethanoneanimal
actionless
copycat-killer
Daniel Hahler
SammysHP
Crazy Lemon