---------------------------------------------------------------------------
--- Module dedicated to gather common shape painters.
--
-- It add the concept of "shape" to Awesome. A shape can be applied to a
-- background, a margin, a mask or a drawable shape bounding.
--
-- The functions exposed by this module always take a context as first
-- parameter followed by the widget and height and additional parameters.
--
-- The functions provided by this module only create a path in the content.
-- to actually draw the content, use `cr:fill()`, `cr:mask()`, `cr:clip()` or
-- `cr:stroke()`
--
-- In many case, it is necessary to apply the shape using a transformation
-- such as a rotation. The preferred way to do this is to wrap the function
-- in another function calling `cr:rotate()` (or any other transformation
-- matrix).
--
-- To specialize a shape where the API doesn't allows extra arguments to be
-- passed, it is possible to wrap the shape function like:
--
--    local new_shape = function(cr, width, height)
--        gears.shape.rounded_rect(cr, width, height, 2)
--    end
--
-- Many elements can be shaped. This include:
--
-- * `client`s (see `gears.surface.apply_shape_bounding`)
-- * `wibox`es (see `wibox.shape`)
-- * All widgets (see `wibox.container.background`)
-- * The progressbar (see `wibox.widget.progressbar.bar_shape`)
-- * The graph (see `wibox.widget.graph.step_shape`)
-- * The checkboxes (see `wibox.widget.checkbox.check_shape`)
-- * Images (see `wibox.widget.imagebox.clip_shape`)
-- * The taglist tags (see `awful.widget.taglist`)
-- * The tasklist clients (see `awful.widget.tasklist`)
-- * The tooltips (see `awful.tooltip`)
--
-- @author Emmanuel Lepage Vallee
-- @copyright 2011-2016 Emmanuel Lepage Vallee
-- @themelib gears.shape
---------------------------------------------------------------------------
local g_matrix = require( "gears.matrix" )
local unpack   = unpack or table.unpack -- luacheck: globals unpack (compatibility with Lua 5.1)
local atan2    = math.atan2 or math.atan -- lua 5.3 compat

local module = {}

--- Add a rounded rectangle to the current path.
-- Note: If the radius is bigger than either half side, it will be reduced.
--
-- @DOC_gears_shape_rounded_rect_EXAMPLE@
--
-- @param cr A cairo content
-- @tparam number width The rectangle width
-- @tparam number height The rectangle height
-- @tparam number radius the corner radius
-- @staticfct gears.shape.rounded_rect
function module.rounded_rect(cr, width, height, radius)

    radius = radius or 10

    if width / 2 < radius then
        radius = width / 2
    end

    if height / 2 < radius then
        radius = height / 2
    end

    cr:move_to(0, radius)

    cr:arc( radius      , radius       , radius,    math.pi   , 3*(math.pi/2) )
    cr:arc( width-radius, radius       , radius, 3*(math.pi/2),    math.pi*2  )
    cr:arc( width-radius, height-radius, radius,    math.pi*2 ,    math.pi/2  )
    cr:arc( radius      , height-radius, radius,    math.pi/2 ,    math.pi    )

    cr:close_path()
end

--- Add a rectangle delimited by 2 180 degree arcs to the path.
--
-- @DOC_gears_shape_rounded_bar_EXAMPLE@
--
-- @param cr A cairo content
-- @param width The rectangle width
-- @param height The rectangle height.
-- @staticfct gears.shape.rounded_bar
function module.rounded_bar(cr, width, height)
    module.rounded_rect(cr, width, height, height / 2)
end

--- A rounded rect with only some of the corners rounded.
--
-- @DOC_gears_shape_partially_rounded_rect_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @tparam boolean tl If the top left corner is rounded
-- @tparam boolean tr If the top right corner is rounded
-- @tparam boolean br If the bottom right corner is rounded
-- @tparam boolean bl If the bottom left corner is rounded
-- @tparam number rad The corner radius
-- @staticfct gears.shape.partially_rounded_rect
function module.partially_rounded_rect(cr, width, height, tl, tr, br, bl, rad)
    rad = rad or 10
    if width / 2 < rad then
        rad = width / 2
    end

    if height / 2 < rad then
        rad = height / 2
    end

    -- Top left
    if tl then
        cr:arc( rad, rad, rad, math.pi, 3*(math.pi/2))
    else
        cr:move_to(0,0)
    end

    -- Top right
    if tr then
        cr:arc( width-rad, rad, rad, 3*(math.pi/2), math.pi*2)
    else
        cr:line_to(width, 0)
    end

    -- Bottom right
    if br then
        cr:arc( width-rad, height-rad, rad, math.pi*2 , math.pi/2)
    else
        cr:line_to(width, height)
    end

    -- Bottom left
    if bl then
        cr:arc( rad, height-rad, rad, math.pi/2, math.pi)
    else
        cr:line_to(0, height)
    end

    cr:close_path()
end

--- A rounded rectangle with a triangle at the top.
--
-- @DOC_gears_shape_infobubble_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @tparam[opt=5] number corner_radius The corner radius
-- @tparam[opt=10] number arrow_size The width and height of the arrow
-- @tparam[opt=width/2 - arrow_size/2] number arrow_position The position of the arrow
-- @staticfct gears.shape.infobubble
function module.infobubble(cr, width, height, corner_radius, arrow_size, arrow_position)
    arrow_size     = arrow_size     or 10
    corner_radius  = math.min((height-arrow_size)/2, corner_radius or 5)
    arrow_position = arrow_position or width/2 - arrow_size/2


    cr:move_to(0 ,corner_radius+arrow_size)

    -- Top left corner
    cr:arc(corner_radius, corner_radius+arrow_size, (corner_radius), math.pi, 3*(math.pi/2))

    -- The arrow triangle (still at the top)
    cr:line_to(arrow_position                , arrow_size )
    cr:line_to(arrow_position + arrow_size   , 0          )
    cr:line_to(arrow_position + 2*arrow_size , arrow_size )

    -- Complete the rounded rounded rectangle
    cr:arc(width-corner_radius, corner_radius+arrow_size  , (corner_radius) , 3*(math.pi/2) , math.pi*2 )
    cr:arc(width-corner_radius, height-(corner_radius)    , (corner_radius) , math.pi*2     , math.pi/2 )
    cr:arc(corner_radius      , height-(corner_radius)    , (corner_radius) , math.pi/2     , math.pi   )

    -- Close path
    cr:close_path()
end

--- A rectangle terminated by an arrow.
--
-- @DOC_gears_shape_rectangular_tag_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @tparam[opt=height/2] number arrow_length The length of the arrow part
-- @staticfct gears.shape.rectangular_tag
function module.rectangular_tag(cr, width, height, arrow_length)
    arrow_length = arrow_length or height/2
    if arrow_length > 0 then
        cr:move_to(0            , height/2 )
        cr:line_to(arrow_length , 0        )
        cr:line_to(width        , 0        )
        cr:line_to(width        , height   )
        cr:line_to(arrow_length , height   )
    else
        cr:move_to(0            , 0        )
        cr:line_to(-arrow_length, height/2 )
        cr:line_to(0            , height   )
        cr:line_to(width        , height   )
        cr:line_to(width        , 0        )
    end

    cr:close_path()
end

--- A simple arrow shape.
--
-- @DOC_gears_shape_arrow_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @tparam[opt=head_width] number head_width The width of the head (/\) of the arrow
-- @tparam[opt=width /2] number shaft_width The width of the shaft of the arrow
-- @tparam[opt=height/2] number shaft_length The head_length of the shaft (the rest is the head)
-- @staticfct gears.shape.arrow
function module.arrow(cr, width, height, head_width, shaft_width, shaft_length)
    shaft_length = shaft_length or height / 2
    shaft_width  = shaft_width  or width  / 2
    head_width   = head_width   or width
    local head_length  = height - shaft_length

    cr:move_to    ( width/2                     , 0            )
    cr:rel_line_to( head_width/2                , head_length  )
    cr:rel_line_to( -(head_width-shaft_width)/2 , 0            )
    cr:rel_line_to( 0                           , shaft_length )
    cr:rel_line_to( -shaft_width                , 0            )
    cr:rel_line_to( 0           , -shaft_length                )
    cr:rel_line_to( -(head_width-shaft_width)/2 , 0            )

    cr:close_path()
end

--- A squeezed hexagon filling the rectangle.
--
-- @DOC_gears_shape_hexagon_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @staticfct gears.shape.hexagon
function module.hexagon(cr, width, height)
    cr:move_to(height/2,0)
    cr:line_to(width-height/2,0)
    cr:line_to(width,height/2)
    cr:line_to(width-height/2,height)
    cr:line_to(height/2,height)
    cr:line_to(0,height/2)
    cr:line_to(height/2,0)
    cr:close_path()
end

--- Double arrow popularized by the vim-powerline module.
--
-- @DOC_gears_shape_powerline_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @tparam[opt=height/2] number arrow_depth The width of the arrow part of the shape
-- @staticfct gears.shape.powerline
function module.powerline(cr, width, height, arrow_depth)
    arrow_depth = arrow_depth or height/2
    local offset = 0

    -- Avoid going out of the (potential) clip area
    if arrow_depth < 0 then
        width  =  width + 2*arrow_depth
        offset = -arrow_depth
    end

    cr:move_to(offset                       , 0        )
    cr:line_to(offset + width - arrow_depth , 0        )
    cr:line_to(offset + width               , height/2 )
    cr:line_to(offset + width - arrow_depth , height   )
    cr:line_to(offset                       , height   )
    cr:line_to(offset + arrow_depth         , height/2 )

    cr:close_path()
end

--- An isosceles triangle.
--
-- @DOC_gears_shape_isosceles_triangle_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @staticfct gears.shape.isosceles_triangle
function module.isosceles_triangle(cr, width, height)
    cr:move_to( width/2, 0      )
    cr:line_to( width  , height )
    cr:line_to( 0      , height )
    cr:close_path()
end

--- A cross (**+**) symbol.
--
-- @DOC_gears_shape_cross_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @tparam[opt=width/3] number thickness The cross section thickness
-- @staticfct gears.shape.cross
function module.cross(cr, width, height, thickness)
    thickness = thickness or width/3
    local xpadding   = (width  - thickness) / 2
    local ypadding   = (height - thickness) / 2
    cr:move_to(xpadding, 0)
    cr:line_to(width - xpadding, 0)
    cr:line_to(width - xpadding, ypadding)
    cr:line_to(width           , ypadding)
    cr:line_to(width           , height-ypadding)
    cr:line_to(width - xpadding, height-ypadding)
    cr:line_to(width - xpadding, height         )
    cr:line_to(xpadding        , height         )
    cr:line_to(xpadding        , height-ypadding)
    cr:line_to(0               , height-ypadding)
    cr:line_to(0               , ypadding       )
    cr:line_to(xpadding        , ypadding       )
    cr:close_path()
end

--- A similar shape to the `rounded_rect`, but with sharp corners.
--
-- @DOC_gears_shape_octogon_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @tparam number corner_radius
-- @staticfct gears.shape.octogon
function module.octogon(cr, width, height, corner_radius)
    corner_radius = corner_radius or math.min(10, math.min(width, height)/4)
    local offset = math.sqrt( (corner_radius*corner_radius) / 2 )

    cr:move_to(offset, 0)
    cr:line_to(width-offset, 0)
    cr:line_to(width, offset)
    cr:line_to(width, height-offset)
    cr:line_to(width-offset, height)
    cr:line_to(offset, height)
    cr:line_to(0, height-offset)
    cr:line_to(0, offset)
    cr:close_path()
end

--- A circle shape.
--
-- @DOC_gears_shape_circle_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @tparam[opt=math.min(width  height) / 2)] number radius The radius
-- @staticfct gears.shape.circle
function module.circle(cr, width, height, radius)
    radius = radius or math.min(width, height) / 2
    cr:move_to(width/2+radius, height/2)
    cr:arc(width / 2, height / 2, radius, 0, 2*math.pi)
    cr:close_path()
end

--- A simple rectangle.
--
-- @DOC_gears_shape_rectangle_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @staticfct gears.shape.rectangle
function module.rectangle(cr, width, height)
    cr:rectangle(0, 0, width, height)
end

--- A diagonal parallelogram with the bottom left corner at x=0 and top right
-- at x=width.
--
-- @DOC_gears_shape_parallelogram_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @tparam[opt=width/3] number base_width The parallelogram base width
-- @staticfct gears.shape.parallelogram
function module.parallelogram(cr, width, height, base_width)
    base_width = base_width or width/3
    cr:move_to(width-base_width, 0      )
    cr:line_to(width           , 0      )
    cr:line_to(base_width      , height )
    cr:line_to(0               , height )
    cr:close_path()
end

--- A losange.
--
-- @DOC_gears_shape_losange_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @staticfct gears.shape.losange
function module.losange(cr, width, height)
    cr:move_to(width/2 , 0        )
    cr:line_to(width   , height/2 )
    cr:line_to(width/2 , height   )
    cr:line_to(0       , height/2 )
    cr:close_path()
end

--- A pie.
--
-- The pie center is the center of the area.
--
-- @DOC_gears_shape_pie_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @tparam[opt=0] number start_angle The start angle (in radian)
-- @tparam[opt=math.pi/2] number end_angle The end angle (in radian)
-- @tparam[opt=math.min(width height)/2] number radius The shape height
-- @staticfct gears.shape.pie
function module.pie(cr, width, height, start_angle, end_angle, radius)
    radius = radius or math.floor(math.min(width, height)/2)
    start_angle, end_angle = start_angle or 0, end_angle or math.pi/2

    -- If the shape is a circle, then avoid the lines
    if math.abs(start_angle + end_angle - 2*math.pi) <= 0.01  then
        cr:arc(width/2, height/2, radius, 0, 2*math.pi)
    else
        cr:move_to(width/2, height/2)
        cr:line_to(
            width/2 + math.cos(start_angle)*radius,
            height/2 + math.sin(start_angle)*radius
        )
        cr:arc(width/2, height/2, radius, start_angle, end_angle)
    end

    cr:close_path()
end

--- A rounded arc.
--
-- The pie center is the center of the area.
--
-- @DOC_gears_shape_arc_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number width The shape width
-- @tparam number height The shape height
-- @tparam[opt=math.min(width height)/2] number thickness The arc thickness
-- @tparam[opt=0] number start_angle The start angle (in radian)
-- @tparam[opt=math.pi/2] number end_angle The end angle (in radian)
-- @tparam[opt=false] boolean start_rounded if the arc start rounded
-- @tparam[opt=false] boolean end_rounded if the arc end rounded
-- @staticfct gears.shape.arc
function module.arc(cr, width, height, thickness, start_angle, end_angle, start_rounded, end_rounded)
    start_angle = start_angle or 0
    end_angle   = end_angle   or math.pi/2

    -- This shape is a partial circle
    local radius = math.min(width, height)/2

    thickness = thickness or radius/2

    local inner_radius = radius - thickness

    -- As the edge of the small arc need to touch the [start_p1, start_p2]
    -- line, a small subset of the arc circumference has to be substracted
    -- that's (less or more) equal to the thickness/2 (a little longer given
    -- it is an arc and not a line, but it wont show)
    local arc_percent = math.abs(end_angle-start_angle)/(2*math.pi)
    local arc_length  = ((radius-thickness/2)*2*math.pi)*arc_percent

    if start_rounded then
        arc_length = arc_length - thickness/2

        -- And back to angles
        start_angle = end_angle - (arc_length/(radius - thickness/2))
    end

    if end_rounded then
        arc_length = arc_length - thickness/2

        -- And back to angles. Also make sure to avoid underflowing when the
        -- rounded edge radius is greater than the angle delta.
        end_angle = start_angle + math.max(
            0, arc_length/(radius - thickness/2)
        )
    end

    -- The path is a curcular arc joining 4 points

    -- Outer first corner
    local start_p1 = {
        width /2 + math.cos(start_angle)*radius,
        height/2 + math.sin(start_angle)*radius
    }

    if start_rounded then

        -- Inner first corner
        local start_p2 = {
            width /2 + math.cos(start_angle)*inner_radius,
            height/2 + math.sin(start_angle)*inner_radius
        }

        local median_angle = atan2(
              start_p2[1] - start_p1[1],
            -(start_p2[2] - start_p1[2])
        )

        local arc_center = {
            (start_p1[1] + start_p2[1])/2,
            (start_p1[2] + start_p2[2])/2,
        }

        cr:arc(arc_center[1], arc_center[2], thickness/2,
            median_angle-math.pi/2, median_angle+math.pi/2
        )

    else
        cr:move_to(unpack(start_p1))
    end

    cr:arc(width/2, height/2, radius, start_angle, end_angle)

    if end_rounded then

        -- Outer second corner
        local end_p1 = {
            width /2 + math.cos(end_angle)*radius,
            height/2 + math.sin(end_angle)*radius
        }

        -- Inner first corner
        local end_p2 = {
            width /2 + math.cos(end_angle)*inner_radius,
            height/2 + math.sin(end_angle)*inner_radius
        }
        local median_angle = atan2(
              end_p2[1] - end_p1[1],
            -(end_p2[2] - end_p1[2])
        ) - math.pi

        local arc_center = {
            (end_p1[1] + end_p2[1])/2,
            (end_p1[2] + end_p2[2])/2,
        }

        cr:arc(arc_center[1], arc_center[2], thickness/2,
            median_angle-math.pi/2, median_angle+math.pi/2
        )

    end

    cr:arc_negative(width/2, height/2, inner_radius, end_angle, start_angle)

    cr:close_path()
end

--- A partial rounded bar. How much of the rounded bar is visible depends on
-- the given percentage value.
--
-- Note that this shape is not closed and thus filling it doesn't make much
-- sense.
--
-- @DOC_gears_shape_radial_progress_EXAMPLE@
--
-- @param cr A cairo context
-- @tparam number w The shape width
-- @tparam number h The shape height
-- @tparam number percent The progressbar percent
-- @tparam boolean hide_left Do not draw the left side of the shape
-- @staticfct gears.shape.radial_progress
function module.radial_progress(cr, w, h, percent, hide_left)
    percent = percent or 1
    local total_length = (2*(w-h))+2*((h/2)*math.pi)
    local bar_percent  = (w-h)/total_length
    local arc_percent  = ((h/2)*math.pi)/total_length

    -- Bottom line
    if percent > bar_percent then
        cr:move_to(h/2,h)
        cr:line_to((h/2) + (w-h),h)
        cr:stroke()
    elseif percent < bar_percent then
        cr:move_to(h/2,h)
        cr:line_to(h/2+(total_length*percent),h)
        cr:stroke()
    end

    -- Right arc
    if percent >= bar_percent+arc_percent then
        cr:arc(w-h/2 , h/2, h/2,3*(math.pi/2),math.pi/2)
        cr:stroke()
    elseif percent > bar_percent and percent < bar_percent+(arc_percent/2) then
        cr:arc(w-h/2 , h/2, h/2,(math.pi/2)-((math.pi/2)*((percent-bar_percent)/(arc_percent/2))),math.pi/2)
        cr:stroke()
    elseif percent >= bar_percent+arc_percent/2 and percent < bar_percent+arc_percent then
        cr:arc(w-h/2 , h/2, h/2,0,math.pi/2)
        cr:stroke()
        local add = (math.pi/2)*((percent-bar_percent-arc_percent/2)/(arc_percent/2))
        cr:arc(w-h/2 , h/2, h/2,2*math.pi-add,0)
        cr:stroke()
    end

    -- Top line
    if percent > 2*bar_percent+arc_percent then
        cr:move_to((h/2) + (w-h),0)
        cr:line_to(h/2,0)
        cr:stroke()
    elseif percent > bar_percent+arc_percent and percent < 2*bar_percent+arc_percent then
        cr:move_to((h/2) + (w-h),0)
        cr:line_to(((h/2) + (w-h))-total_length*(percent-bar_percent-arc_percent),0)
        cr:stroke()
    end

    -- Left arc
    if not hide_left then
        if percent > 0.985 then
            cr:arc(h/2, h/2, h/2,math.pi/2,3*(math.pi/2))
            cr:stroke()
        elseif percent  > 2*bar_percent+arc_percent then
            local relpercent = (percent - 2*bar_percent - arc_percent)/arc_percent
            cr:arc(h/2, h/2, h/2,3*(math.pi/2)-(math.pi)*relpercent,3*(math.pi/2))
            cr:stroke()
        end
    end
end

--- Adjust the shape using a transformation object
--
-- Apply various transformations to the shape
--
-- @usage gears.shape.transform(gears.shape.rounded_bar)
--    : rotate(math.pi/2)
--       : translate(10, 10)
--
-- @param shape A shape function
-- @return A transformation handle, also act as a shape function
-- @staticfct gears.shape.transform
function module.transform(shape)

    -- Apply the transformation matrix and apply the shape, then restore
    local function apply(self, cr, width, height, ...)
        cr:save()
        cr:transform(self.matrix:to_cairo_matrix())
        shape(cr, width, height, ...)
        cr:restore()
    end
    -- Redirect function calls like :rotate() to the underlying matrix
    local function index(_, key)
        return function(self, ...)
            self.matrix = self.matrix[key](self.matrix, ...)
            return self
        end
    end

    local result = setmetatable({
        matrix = g_matrix.identity
    }, {
        __call = apply,
        __index = index
    })

    return result
end

return module

-- vim: filetype=lua:expandtab:shiftwidth=4:tabstop=8:softtabstop=4:textwidth=80