Merge pull request #56 from psycorama/master

FreeBSD memory widgets bugfixes and improvements

README.md

@@ -323,9 +323,10 @@ Supported platforms: Linux, FreeBSD.
     total system memory, 4th as free memory, 5th as swap usage in percent, 6th
     as swap usage, 7th as total system swap, 8th as free swap and 9th as
     memory usage with buffers and cache
-  * FreeBSD: see above, but 10th value as memory usage with buffers and cache
-    as percent and 11th value as wired memory (memory used by kernel) is
-    reported
+  * FreeBSD: see above, but there are four more values: the 9th value is wired memory
+    in percent, the 10th value is wired memory. The 11th and 12th value return
+    'not freeable memory' (basically active+inactive+wired) in percent and megabytes,
+    respectively.
 
 **vicious.widgets.mpd**
 

widgets/bat_freebsd.lua

@@ -30,6 +30,8 @@ local function worker(format, warg)
         state =  "↯"
     elseif bat_info["State"] == "charging" then
         state = "+"
+    elseif bat_info["State"] == "critical charging" then
+        state = "+"
     elseif bat_info["State"] == "discharging" then
         state = "-"
     else

widgets/mem_freebsd.lua

@@ -16,55 +16,56 @@ local function worker(format)
     local vm_stats = helpers.sysctl_table("vm.stats.vm")
     local _mem = { buf = {}, total = nil }
 
+    -- Get memory space in bytes
     _mem.total = tonumber(vm_stats.v_page_count) * pagesize
-    _mem.buf.f = tonumber(vm_stats.v_free_count) * pagesize
-    _mem.buf.a = tonumber(vm_stats.v_active_count) * pagesize
-    _mem.buf.i = tonumber(vm_stats.v_inactive_count) * pagesize
-    _mem.buf.c = tonumber(vm_stats.v_cache_count) * pagesize
-    _mem.buf.w = tonumber(vm_stats.v_wire_count) * pagesize
+    _mem.buf.free = tonumber(vm_stats.v_free_count) * pagesize
+    _mem.buf.laundry = tonumber(vm_stats.v_laundry_count) * pagesize
+    _mem.buf.cache = tonumber(vm_stats.v_cache_count) * pagesize
+    _mem.buf.wired = tonumber(vm_stats.v_wire_count) * pagesize
 
-    -- rework into Megabytes
-    _mem.total = math.floor(_mem.total/(1024*1024))
-    _mem.buf.f = math.floor(_mem.buf.f/(1024*1024))
-    _mem.buf.a = math.floor(_mem.buf.a/(1024*1024))
-    _mem.buf.i = math.floor(_mem.buf.i/(1024*1024))
-    _mem.buf.c = math.floor(_mem.buf.c/(1024*1024))
-    _mem.buf.w = math.floor(_mem.buf.w/(1024*1024))
+    -- Rework into megabytes
+    _mem.total = math.floor(_mem.total/1048576)
+    _mem.buf.free = math.floor(_mem.buf.free/1048576)
+    _mem.buf.laundry = math.floor(_mem.buf.laundry/1048576)
+    _mem.buf.cache = math.floor(_mem.buf.cache/1048576)
+    _mem.buf.wired = math.floor(_mem.buf.wired/1048576)
 
     -- Calculate memory percentage
-    _mem.free  = _mem.buf.f + _mem.buf.c
-    _mem.inuse = _mem.buf.a + _mem.buf.i
-    _mem.wire  = _mem.buf.w
-    _mem.bcuse = _mem.total - _mem.buf.f
+    _mem.free  = _mem.buf.free + _mem.buf.cache
+    -- used memory basically consists of active+inactive+wired
+    _mem.inuse = _mem.total - _mem.free
+    _mem.notfreeable = _mem.inuse - _mem.buf.laundry
+    _mem.wire  = _mem.buf.wired
+
     _mem.usep  = math.floor(_mem.inuse / _mem.total * 100)
-    _mem.inusep= math.floor(_mem.inuse / _mem.total * 100)
-    _mem.buffp = math.floor(_mem.bcuse / _mem.total * 100)
     _mem.wirep = math.floor(_mem.wire / _mem.total * 100)
+    _mem.notfreeablep = math.floor(_mem.notfreeable / _mem.total * 100)
 
     -- Get swap states
-    local vm = helpers.sysctl_table("vm")
+    local vm_swap_total = tonumber(helpers.sysctl("vm.swap_total"))
+    local vm_swap_enabled = tonumber(helpers.sysctl("vm.swap_enabled"))
     local _swp = { buf = {}, total = nil }
 
-    if tonumber(vm.swap_enabled) == 1 and tonumber(vm.swap_total) > 0 then
-        -- Get swap space
-        _swp.total = tonumber(vm.swap_total)
-        _swp.buf.f = _swp.total - tonumber(vm_stats.v_swapin)
+    if vm_swap_enabled == 1 and vm_swap_total > 0 then
+        -- Get swap space in bytes
+        _swp.total = vm_swap_total
+        _swp.buf.free = _swp.total - tonumber(vm_stats.v_swapin)
         -- Rework into megabytes
-        _swp.total = math.floor(_swp.total/(1024*1024))
-        _swp.buf.f = math.floor(_swp.buf.f/(1024*1024))
+        _swp.total = math.floor(_swp.total/1048576)
+        _swp.buf.free = math.floor(_swp.buf.free/1048576)
         -- Calculate percentage
-        _swp.inuse = _swp.total - _swp.buf.f
+        _swp.inuse = _swp.total - _swp.buf.free
         _swp.usep  = math.floor(_swp.inuse / _swp.total * 100)
     else
          _swp.usep = -1
          _swp.inuse = -1
          _swp.total = -1
-         _swp.buf.f = -1
+         _swp.buf.free = -1
     end
 
     return { _mem.usep,  _mem.inuse, _mem.total, _mem.free,
-             _swp.usep,  _swp.inuse, _swp.total, _swp.buf.f,
-             _mem.bcuse, _mem.buffp, _mem.wirep }
+             _swp.usep,  _swp.inuse, _swp.total, _swp.buf.free,
+             _mem.wirep, _mem.wire, _mem.notfreeablep, _mem.notfreeable }
 end
 
 return setmetatable(mem_freebsd, { __call = function(_, ...) return worker(...) end })