Twice now we had problems with the garbage collector which caused signals
established via weak_connect_signal() not to be disconnected when we wanted them
to be disconnected. The effect was that we tried to redraw a drawable after it
was garbage collected which caused errors.
Instead of playing whack-a-mole with all the various ways that might make us
redraw a drawable after GC, let's just fix all of these issues by explicitly
checking for this case and turning it into a no-op.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The previous commit made wibox.drawable turn a "normal redraw" into a complete
repaint when it was moved to another screen. However, nothing happened until
that normal redraw.
This commit triggers a normal redraw when we are (possibly) moved to another
screen. More precise, this means that whenever a screen appears, disappears or
changes its geometry and when the drawable is moved, we trigger a normal redraw.
This redraw will likely do nothing, because no relayout is pending and no part
of the surface needs a redraw, so it is cheap.
However, if the drawable really ends up on another screen, then the code from
the previous commits makes us do a full relayout and redraw.
This commit likely fixes the current instability of test-screen-changes.lua. See
https://github.com/awesomeWM/awesome/issues/982#issuecomment-231712056.
As explained there, the test fails because the fake screen that it created is
still referenced, so cannot be garbage collected, but the test doesn't succeed
unless the screen is garbage collected. So something is still referencing the
screen that was removed. This something can be a client's titlebar, because the
underlying drawable still has a context member referring to the old screen.
This commit should fix that problem, because we now trigger a redraw which will
compute a new context and thus the reference to the old screen is released.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The previous commit made the hierarchy do a re-layout when the context changes.
However, widgets could change their appearance depending on the context without
changing their layout. Thus, the previous commit is not enough.
This commit also makes the drawable redraw everything when the context changes.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When the context for widget changes (e.g. we are on a new different screen or
have a different DPI value), widgets might change their appearance even though
they didn't emit widget::layout_changed. Thus, update the hierarchy in these
cases.
Signed-off-by: Uli Schlachter <psychon@znc.in>
widget_at() no longer exists since 0aa4304bda (and the surrounding commits
stopped us using this function).
Signed-off-by: Uli Schlachter <psychon@znc.in>
The actual bg is drawn either with fake transparency over the wallpaper (this
uses operator OVER) or for true transparency with operator SOURCE. The bgimage
should be drawn ontop of this without erasing the background and thus needs
operator OVER.
However, before this commit the bgimage was drawn in the same way as the bg and
thus inherited its SOURCE operator if a compositor is running. Fix this by
restoring the default operator (OVER) and also e.g. the default source before
drawing the bgimage.
Fixes: https://github.com/awesomeWM/awesome/issues/954
Signed-off-by: Uli Schlachter <psychon@znc.in>
When called with the file name of an image, this function failed to turn that
file name into a cairo surface.
Fixes: https://github.com/awesomeWM/awesome/issues/954
Signed-off-by: Uli Schlachter <psychon@znc.in>
The requirement to call add_signal() was added to catch typos. However, this
requirement became increasingly annoying with property::<name> signals and e.g.
gears.object allowing arbitrary properties to be changed.
All of this ended up in a single commit because tests/examples fails if I first
let add_signal() emit a deprecation warning.
Signed-off-by: Uli Schlachter <psychon@znc.in>
It was set as `module` instead of `class` because ldoc was confused
set shown the methods as functions and functions as methods.
This commit set the explicit section so ldoc don't gress (wrongly)
local functions and metatable based constructors are not
documented unless an explicit @function is added.
Also add missing return values and fix formatting.
Before this commit, it was necessary to call 'rawset' to be
able to add new fields to the wibox. This is no longer required.
This solution was choosen because wibox is itself a base class of
menus and wibars. Those classes can now add new properties without
hacks.
As wibox contain a drawin, but isn't one, it is necessary to map
drawin to wibox.
This could eventually be fixed by turning wibox into drawin just
like the client, tag and screen do.
When there are no screens, screen[1] causes an error. Thus, this isn't a safe
fallback for these functions. Instead, this commit makes the code prefer the
primary screen, if possible. If no screen exists, then screen.primary will be
nil, but at least it won't throw an error like screen[1] does.
(This also changes the outdated copy of getbycoord that exists in
wibox.drawable)
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes it possible to have the systray only visible on the primary screen,
which is the new default value. This also makes it possible to configure
directly on which screen the systray should be visible.
This breaks the API in the sense that people who use "the old method" to
configure the systray's screen possibly don't have a systray.
Fixes: https://github.com/awesomeWM/awesome/issues/724
Signed-off-by: Uli Schlachter <psychon@znc.in>
There's no point in having multiple instances of this, because there are no
per-instance settings and the systray can only be visible in a single place at a
time anyway.
Signed-off-by: Uli Schlachter <psychon@znc.in>
* Better widget names when using the declarative syntax
* Add ratio.get_ratio to avoid using the private API
* Also support `set_widget` when swapping widgets
Issues involve:
- :layout() had the wrong signature and expected a cr argument that was left
from when this was still the :draw() function.
- horizontal and vertical reflection were mixed up (I guess it has always been
this way?)
- The return value should be a table of widget placements. Instead it was just a
single widget placement.
This is broken since commit 85ab3f045b.
Fixes: https://github.com/awesomeWM/awesome/issues/718
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit makes these methods invoke the method on a widget in a protected
context. Thanks to this, e.g. the wibox and other widgets are protected from
errors in a child widget.
Additionally, fit_widget() now assumes 0 if a widget's :fit() method didn't
provide a number.
Signed-off-by: Uli Schlachter <psychon@znc.in>
I just spent too much time tracking down a bug that happened while drawing a
widget. This is the reason why we should apply sanity checks while widgets are
constructed, so that we get a useful backtrace.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes the code use the existing functions for setting widgets. That way,
all the sanity checks that the existing functions have are applied for this code
as well.
I just spent half an hour tracking down a bug where a boolean ended up as a
"widget" in a fixed layout. The symptom was that while drawing the widget, an
error happened. Via this change, the error would instead be flagged while
constructing the widget.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit documents that a textbox already accepts a screen object where a
screen index is expected. Also, this changes the widget API in that a widget's
context.screen is now a screen object instead of a screen index.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This layout allow each widgets to take 'r' percent of the total
space, where 'r' is configurable.
It re-implement the 'wfact' system used by `awful.layout.suit.tile`
This layout display the widgets on top of each other. It can also optionally
display only the first one.
The most common use case is to create a composited widget. Other use case
include the creation of a "paged" stack to only display the most
relevant widget without adding extra complexity to the parent layout.
This new syntax is inspired by the Awesome widget 3.2-3.4 API. It
allow cleaner widgets declaration. The produced code is usually much
shorted and easier to read than wibox.widget imperative syntax.
There is already a hack into `awful.widget.common`. This system aim
to make the hack obselete while preserving the useful part.
I think this is also necessary to properly support SVG (with DPI
and resize).
Finally, Qt handle this using the QBrush concept, where you can have
programmatic patterns. Cairo doesn't have this concept, so there is no
"clean" way to have programmatic brushes.
It's unused since commit 0aa4304bda. Before this was a stable sorting
algorithm since table.sort is allowed to be unstable. Apparently we don't need a
stable sorting algorithm anymore.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Until now, this layout was "append only". There was no official
APIs to remove, replace, insert and swap widgets. This is fine
for the usual wibox + sensors widget used by the majority of
users, but lack flexibility necessary to use the layout system
to place dynamic elements such as clients.
The methods introduced by this commit are also recursive. This
allow widgets to be decorated, wrapped and splitted without
having to add boilerplate code everywhere.
This remove duplicated code and will allow more "collection"
style layouts to be implemented without logic duplication.
This commit also do some small cleanup to remove duplicated
code now present in `awful.util`.
Fixes https://github.com/awesomeWM/awesome/issues/617
Instead of throwing a Lua error, the code now just prints an error message to
stderr on invalid markup. For callers which want to handle this case specially,
we add :set_markup_silently() which returns error messages.
Fixes: https://github.com/awesomeWM/awesome/issues/546
Signed-off-by: Uli Schlachter <psychon@znc.in>
Without this fix `wibox.widget.textbox` ignores current theme font
setting and resets it to the initial one.
It becomes handy when the initial theme is tweaked during runtime, ie.
in `rc.lua`. Other AwesomeWM components like `awful` (taglist,
tasklist, menu) are aware and do respect the actual theme settings.
Closes https://github.com/awesomeWM/awesome/pull/89.
This adds new functions to all widgets that allow to force a specific
width/height. These values override the result from :fit().
Signed-off-by: Uli Schlachter <psychon@znc.in>
When emitting layout_changed, the widget is relayouted. If this doesn't actually
change anything, nothing will be redrawn. Thus, this also emits redraw_needed to
force redraws.
This fixes a race condition with some weird tray icons. A new tray icon is
created and the systray is updated. Then this new icon is destroyed immediately
again and at the same time another icon is created. Then, the systray isn't
updated since the number of icons (=the layout) did not actually change.
However, it needs to be updated and so we ended up with broken/missing icons.
Fixes: https://github.com/awesomeWM/awesome/issues/487
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allows scrolling a widget if there is too few space available. There are
several different modes available for how the scrolling "looks like".
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds :get_preferred_size() and :get_preferred_size_at_dpi() which return
the size (=width, height) that the textbox would need if unlimited space is
available.
This also adds :get_height_for_width() and :get_height_for_width_at_dpi() which
return the height that the textbox would need if the given width is available.
Signed-off-by: Uli Schlachter <psychon@znc.in>
If someone modifies a cairo surface and then sets the resulting object as the
image of an imagebox, the imagebox needs to redraw. Thus, since surfaces are
modifiable, we cannot assume that nothing changed when the same image is set
multiple times on an imagebox.
However, the dimensions of a surface cannot be changed and thus this does not
need to emit widget::layout_changed.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit does two things: It gets rid of the reference to the layoutbox that
the default config created and it changes the widget dependency cache to not
keep widgets alive unnecessarily.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This function updates a hierarchy if the layout of some widgets changed. It does
nothing on the parts that did not change. This should be more efficient than
recomputing the whole hierarchy whenever something changes.
Once again, this has some positive results on the "benchmark test":
Before:
create wibox: 0.083016 sec/iter ( 13 iters, 1.161 sec for benchmark)
update textclock: 0.00391091 sec/iter (271 iters, 3.219 sec for benchmark)
relayout textclock: 0.00273234 sec/iter (397 iters, 1.087 sec for benchmark)
redraw textclock: 0.0010191 sec/iter (989 iters, 1.745 sec for benchmark)
After:
create wibox: 0.083146 sec/iter ( 13 iters, 1.163 sec for benchmark)
update textclock: 0.00170519 sec/iter (647 iters, 2.201 sec for benchmark)
relayout textclock: 0.000581637 sec/iter (1880 iters, 1.094 sec for benchmark)
redraw textclock: 0.0010167 sec/iter (997 iters, 1.773 sec for benchmark)
So again no difference for creating wiboxes (100.16% compared to before). This
time we also have no real difference for creating wiboxes (99.76%). Update (44%)
and relayout (21%) are improved a lot.
Closes https://github.com/awesomeWM/awesome/pull/463.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes the textbox' :draw() and :fit() callbacks use the DPI that is
specified in the given drawing context. With this, the textbox now scales
correctly if different screens have different DPI values.
Idea originally from Daniel.
Closes https://github.com/awesomeWM/awesome/pull/457.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This has some positive results on the "benchmark test". Each single number is
the best one out of three runs.
Before:
create wibox: 0.0826502 sec/iter ( 13 iters, 1.157 sec for benchmark)
update textclock: 0.0186952 sec/iter ( 57 iters, 2.473 sec for benchmark)
relayout textclock: 0.0158112 sec/iter ( 64 iters, 1.028 sec for benchmark)
redraw textclock: 0.0015197 sec/iter (662 iters, 1.861 sec for benchmark)
After:
create wibox: 0.0825672 sec/iter ( 13 iters, 1.154 sec for benchmark)
update textclock: 0.00378412 sec/iter (277 iters, 4.216 sec for benchmark)
relayout textclock: 0.00259056 sec/iter (420 iters, 1.09 sec for benchmark)
redraw textclock: 0.00105128 sec/iter (958 iters, 1.79 sec for benchmark)
We see no significant change in the creation of wiboxes (99.9% compared to
before). Update (20% of the previous run time), relayout (16%) and redraw (69%)
are all sped up by this change.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before this, dependencies between widgets where implicitly discovered by
recursive calls to base.fit_widget() and base.layout_widget(). However, it is
too easy to get this wrong (just call one of these functions from outside of a
widget's :fit() / :layout() function) and the resulting mess would be hard to
debug.
Thus, this commit changes the API so that callers have to identify themselves
and we can explicitly record the dependency between the widgets involved.
This also fixes a bug where no dependencies were tracked for widgets after
:set_visible(false). Whoops...
Sorry for breaking the API for adding this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When a complete repaint is scheduled, also do a relayout, because this is also
the case that we go through when the underlying cairo surface is resized. For
example, resizing a client with a titlebar would trigger this.
Also, going through this code path is necessary since this is the only place
where the dirty area is updated so that it includes "everything". Before this
change, nothing was actually redrawn, because the dirty area was empty.
Fixes: https://github.com/awesomeWM/awesome/issues/449
Signed-off-by: Uli Schlachter <psychon@znc.in>
This accidentally called the draw callbacks with a nil argument instead of the
context. This was introduced in some badly done rebase, sorry! :-(
Signed-off-by: Uli Schlachter <psychon@znc.in>
The parent was needed for :get_matrix_to_device() which recursively walked
parents and multiplied together their transformation matrices. This is now
replaced by calculating all these matrices while constructing the hierarchy.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There once was a function :get_root() on hierarchies, but that wasn't needed any
more and thus was removed. This commit also removes the internal code that was
used to record the root element of the hierarchy.
Signed-off-by: Uli Schlachter <psychon@znc.in>
These caches, well, cache the result of the :layout and :fit callbacks on
widgets.
Clearing caches is done by recording dependencies between a widget. When a call
to base.fit_widget() or base.layout_widget() recursively causes another call to
such a function, this means that the earlier widget depends on the later widget.
This dependency is recorded and when the later widget emits
widget::layout_changed, the caches of all the widgets involved are cleared.
Signed-off-by: Uli Schlachter <psychon@znc.in>
A widget hierarchy describes the position of widgets. The hierarchy is a
recursive tree of widget hierarchy instances. This functionality depends on a
:layout function that is not yet implemented on widgets, but will be added
later.
Signed-off-by: Uli Schlachter <psychon@znc.in>
After this change, fit_widget() enforces that a widget cannot ask for more space
than was offered to it. This also fixes a rounding issue in the flex layout
where its fit function would return too small numbers.
Thanks to this, lots of "XXX" comments in spec/ disappear.
Signed-off-by: Uli Schlachter <psychon@znc.in>
In expand nodes "none" and "outside", the variable size_remains describes how
much space is available for the first/third widget. Everything else is used by
the second widget. Thus, fitting the second widget to anything involving
size_remains is wrong. Instead, this commit uses the correct value.
This also fixes a messed up argument order for horizontal align layouts.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This table contains the drawable, wibox and titlebar that we are drawing on, but
also includes the screen and the DPI of that screen. This allows widgets to
depend on the DPI in their rendering.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Having two modules named "base" is confusing and "wibox.layout" doesn't contain
much useful stuff. This is a first step for removing wibox.layout by moving a
function which should only ever be used internally in awesome.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This way "that other widget" doesn't prevent the current widget from being
garbage collected.
Please note that this in all of these cases the widget under consideration does
have a strong reference to the callback function. This means that the callback
cannot be garbage collected until "this widget" itself is collected. Thanks to
this, this change is safe.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This made it easier to figure out where a file causing an error was
coming from, but I could imagine that this could become too noisy, and
that there is/should probably be a more streamlined way to enable more
verbose logging / error output.
The old code transformed the top-left and bottom-right corner of the rectangle
to device space and calculated a rectangle based on these two points. However,
if you rotate a rectangle by 45°, these two points will be directly above each
other and thus the old code would calculate a width of 0.
Fix this by transforming all four corners of the rectangle into device space and
calculating a rectangle based on this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When an imagebox was drawn with width or height zero, it tried to calculate the
needed scale factor for making the image fit. Sadly, this would be a division by
zero aka infinite in this case.
Fix this by just not drawing anything if there is no space available.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously, odd things could happen if a widget was getting fitted into a
negative width or, even worse, width being NaN (not a number)!
This can e.g. happen due to a margin layout which doesn't get enough space to
even draw the margin that it is supposed to add.
Fix this by enforcing a minimum value of 0 for the width and height that a
widget gets fitted into.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Given an imagebox i with i.resize_forbidden = false and a valid image set, the
call t:fit(0, 0) would return two times "not a number".
This is because the code first does some calculations to get the input image
into the available space and then tried to do some calculations needed for
scaling images up.
The first calculation already gave us h == 0 == w, the second calculation would
then calculate 0/0. This results in NaNs.
This was only noticed because NaN is not a valid table index in lua.
Fix this by returning 0,0 if we have an image of width or height 0 after the
first calculation. Since 0x0 images are valid in cairo, this also fixes the same
bug with such images.
Signed-off-by: Uli Schlachter <psychon@znc.in>
If a drawable has an opaque background, we don't need pseudo transparency and
thus its content don't change when it is moved. However, when we need pseudo
transparency, then we have to redraw the drawable to apply the new background.
Previously we just always did the redraw. This commit adds a helper function
gears.color.create_opaque_pattern() that analyzes a cairo pattern for
transparency. We use this new function to only redraw-on-move when there is
actual pseudo transparency in effect. Otherwise, this redraw can be skipped.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Added set_expand function with options of "none" "outside" or "inside" modes.
The "inside" mode is the default and will result in the original behavior. The
main benefit is being able to actually center a widget in the available space
with options of how to draw the outside widgets (expand to take the space,
or not.) Further functionality can be had by ommiting one of the outside
widgets. Set default layout mode in the constructor.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This changes the align layout fit function so that align:fit will not return
more space than is actually needed by its sub-widgets. Changes to align:draw
were also required so that any widget assigned to the middle slot will expand
to fill the remaining space.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commits adds awesome.register_xproperty(). This allows lua code to register
arbitrary X11 properties with awesome which will then watch these properties.
Whenever such a property is changed on a client or drawin, we will emit the
xproperty::name signal.
This also adds window:get_xproperty(name) and window:set_xproperty(name, value)
which allows to mess with properties.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes the drawable paint the wallpaper in the background
(i.e. pseudo transparency) only if there is not a composite manager running,
as reported by the value of awesome.composite_manager_running.
In other words: drawables can now make use of true transparency.
Signed-off-by: Björn Åström <bjoast@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a :set_color() method so that the margin layout can color the margins,
drawing a bordered widget.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The last widget always took up the remaining
space even though fill_space(false)
had been called on the layout.
This got broken in commit 9d333113dd.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit adds and uses wibox.layout.base.fit_widget(). This function is a
wrapper for widget:fit() that caches the result and thus speeds things up.
This is necessary because some layouts call :fit() from their :fit() and :draw()
functions. Nesting such layouts means that at the widget at the tail of the
stack gets its :fit() function called quite often. If this function is not
blazingly fast, this results in noticeable slowness.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The flex:fit() function was calling the fit() function of the widgets it
contained with too large values, trying to hand out more space than it had
available. This resulted in more space being requested than was available and
some weird layout issues resulted.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Fixes mixed up min/max strategies and other bugs in min and max. Also
removes enforcing the size in draw, adhering more to awesome's layout
concept.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This has to be removed because it breaks the fallback to the default config if
the first config already managed to create a systray widget. This doesn't mean
that it is suddenly possible to have the systray visible in more than one place,
it just means that awesome will no longer complain about this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Let's consider the following notification:
naughty.notify({ text = "foo", bg = "#88888888", timeout=1 })
naughty.notify({ text = "foo", bg = "#88888888", timeout=2 })
When the first notification disappears, the second one is moved and takes its
place. However, its content was not redrawn. This makes the pseudo-transparency
break and the wallpaper that is shown in the back of the notification doesn't
match the real wallpaper.
Fix this by redrawing drawables when they get moved.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Thanks to the previous commit, a drawable can no longer have a finished cairo
surface. Instead, it will now have a nil surface. This commit handles this new
possibility.
Signed-off-by: Uli Schlachter <psychon@znc.in>
A hack around abusing the fact that width of a textbox is 0 when its
empty, while it's height is still set according to the font.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The function can be used to set the maximum size the widget in the
flex layout should take.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The systray widget's fit() function worked in the (rotated) user coordinate
space while the draw() function used device coordinates (unrotated). This meant
that width and height were swapped up in the calculations and the systray ended
up being way too small.
Fix this by making the draw() function use user coordinates, too. This means
that it needs some new magic to detect a rotated coordinate space. This, in
turn, means that the systray is now automatically rotated when you put it into a
rotate layout.
This might cause some minor breakage because people no longer need to call
:set_horizontal() on the widgets.
Thanks a lot to Alexander Gehrke for his help!
Signed-off-by: Uli Schlachter <psychon@znc.in>
I amended some change to commit 8560de597c which made the align layout's
middle widget really centered instead of being way too wide. However, this also
shrunk the widget on the "other" axis, too. This commit fixes that up.
A big "sorry" to Lukáš for breaking his patch.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This layout can be used to constraint the size of the widget it holds.
Depending on the strategy passed to it, the widget will have a minimum,
maximum or exact size that was set through this layout.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Centers the middle widget in the align layout in the remaining space
left by the widgets on the sides.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a fit function to the align layout that makes sure that
the layout will not take up all the available space in the other
axis than it's direction. Eg. for horizontal align layout, it will
only take up the maximum of its widgets' heights in the vertical axis.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The fit function of the flex layout is different from the fixed.fit one.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The current code relied on some widget to cause a redraw when the focus changes.
Obviously, this assumption is wrong.
Instead, the code now uses the proper "focus" and "unfocus" signals for setting
titlebar colors, but it also needs to set these colors when a new titlebar is
created (v1 of this patch forgot that). For this reason, update_colors has to be
saved for when a titlebar's colors are updated.
This commit also reverts the ugly redraw_hook hack from commit a1918b8306.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This patch gets rid of lots of errors that happen when beautiful.init() is not
called in the config. Most of them were missing default values.
Thanks to panthar for reporting this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
In 3.4, an imagebox' image is set via "box.image = foo". Since widgets are just
ordinary tables in 3.5, this will actually mess with the imagebox' image without
setting it correctly.
Fix this by renaming the entry to "_image".
A similar patch was applied to the textbox widget ages ago.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This saves space when constructing widgets, because some common cases can now be
done in a single line of code.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This replaces lots of function foo.bar(this, ...) with function foo:bar(...).
There should be no other changes in this commit.
The point is to make it easier for api documentation tools to figure out that
these are methods on objects.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Drawables could never be garbage-collected, because of the "wallpaper_changed"
signal. The callback function for this signal kept a strong reference to the
drawable.
Fix this by putting all drawable's draw() methods into a weakly keyed tabled so
that the strong reference to them disappears.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commits adds the necessary lua code so that we finally can have titlebars.
As the baseline for the needed functionality, the titlebar code in awesome 3.4
and a quick poll on the mailing list were used.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This new property is used for fixing some missing redraws that the old code had.
Those could be seen via awful.menu. Open and close a submenu repeatedly and the
submenu will appear black.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit makes it possible to add titlebars to a client. These titlebars are
drawables.
The drawin's input handling is moved to the drawable. This allows it to use the
same code for drawin and titlebar input handling, although there are lots of
differences between the two on the C side.
On the lua side, a new wibox.drawable module is created which handles all the
drawable-specific magic and which can also be used for titlebars.
Signed-off-by: Uli Schlachter <psychon@znc.in>
A drawable is something that you can draw to, just like a drawin. However, a
drawable isn't necessarily its own windows. This will later on be used to
implement titlebars where the titlebars are drawables.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Without this, input handling is broken (draw_widget() registers each widget with
its position for input handling).
This also removes some unnecessary save()/restore() calls. Our caller (again
draw_widget()) already does that for us.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Uli Schlachter
Emmanuel Lepage Vallee
Salorium
Daniel Hahler
Daniel Hahler
Yauhen Kirylau
Grigory Mischenko
kindlycat
Julian Wollrath
Ignas Anikevicius (gns_ank)
Dario Russo
Tin Benjamin Matuka
sirkha
Björn Åström
Rocco Aliberti
Lukáš Hrázký
Arvydas Sidorenko