Just re-arranging on every focus change would cause useless/needless
re-arranges (which have no effect except to waste CPU time). Thus, this
adds a special (undocumented) flag on layouts that makes sure that a
rearrange occurs when the focus changes.
Fixes: https://github.com/awesomeWM/awesome/issues/1799
Signed-off-by: Uli Schlachter <psychon@znc.in>
When the border width changes, we move the client according to its
gravity. This can cause problems with the following code. Fix this by
restoring the original border width again, which undoes the move.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a C program which tests if the window manager handles
gravities correctly. This program is loosely based on metacity's
test-gravity.c, but completely rewritten and this version does automatic
tests instead of allowing the user to perform testing by hand.
By having this as a self-contained C program, it is possible to compare
awesome's behaviour with the behaviour of other WMs.
In my testing, only metacity and awesome pass this test. This is not
that much of a big surprise since awesome was fixed in
https://github.com/awesomeWM/awesome/pull/505 to work correctly with
metacity's test-gravity.c. However, I am surprised that e.g. Fluxbox
gets this wrong.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There are some cases where a client's floating state "silently" changes.
For example, a fullscreen client will be considered floating. However,
even though c.floating changes its value in this case, we did not emit
the property::floating signal.
Fix this by explicitly tracking the "implicitly floating" state. When
some property that influences this "implicitly floating" state changes,
we update it and if a client which was not explicitly assigned a
floating state observes a change in this value, property::floating is
emitted.
This was tested by running a terminal and two xeyes in a tag with a
tiling layout where awful.ewmh was patched so that clients do not change
their geometry when fullscreening or maximizing. It was observable that
after this patch e.g. the titlebar and the tasklist update to show the
floating state of the client which became implicitly floating due to
being maximized.
Fixes: https://github.com/awesomeWM/awesome/issues/1662
Signed-off-by: Uli Schlachter <psychon@znc.in>
For a while now we had our code coverage tools tell us that the coverage
for one line of code fluctuated. Sometimes it was being executed and
other times it was not. This is useless noise.
I think what is happening here is that the coverage depends on the order
of iteration over a table. Either the tooltip that is being created was
first made visible and then it text changed, or things happened in the
opposite order.
Fix this by doing this by explicitly changing the tooltip's text while
it is surely visible.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously it would print a table which would include the memory
location where the table was stored. Thus, this produces a different
result on every build.
Signed-off-by: Uli Schlachter <psychon@znc.in>
tests/run.sh waits for awesome to exit via tail's "--pid" option. This
makes tail check once per second if the process still exists and if not,
tail will exit. However, the default of "once per second" causes lots of
wasted time for us.
This commit adds the argument "-s 0.1" to tail which makes tail check
once every 0.1 seconds. This commit changes the time that "tests/run.sh"
runs on Travis from about 60 seconds to about 35 seconds, which is a big
improvement.
Closes: https://github.com/awesomeWM/awesome/issues/1374
Signed-off-by: Uli Schlachter <psychon@znc.in>
When the keyboard layout is modified via xmodmap, each single "change"
(line of input to xmodmap) causes an "the keyboard configuration
changed"-event to be sent. Awesome reacted to each of these events by
reloading the keyboard layout. Thus, awesome reloaded the keyboard
layout a lot and appeared to freeze.
Fix this by asynchronously update the keyboard state: When such an event
comes in, instead of reloading things immediately, we set a flag which
makes us update the state at the end of the main loop iteration. This
means that many events still cause only a single (or at least few)
re-quering of the layout. Thus, a lot of time is saved.
This commit removes the argument to the (undocumented!) signal
xkb::group_changed. Previously, the argument was the active group
number. Since this argument was unused and I'm lazy, I just removed it.
The alternative would be that it might be visible to Lua that some "the
active group changed"-events are dropped.
Fixes: https://github.com/awesomeWM/awesome/issues/1494
Signed-off-by: Uli Schlachter <psychon@znc.in>
* Move table functions out of awful.util into new gears.table
* travis: Use v9999 prefix for full requests
Make sure no newly deprecated functions are used
* Move all `awful.util.table.*` calls to `gears.table.*` calls
Move table test functions from awful/util_spec to new gears/table_spec
Change awful.util.subsets call to gears.math.subsets in awful/key.lua
This makes the scroll and only_on_screen widgets appear in the widget
lists. The examples are not really helpful, but Elv13 told me to add
them. Also, only_on_screen is in awful.widget, but now something in
tests/examples/wibox/container refers to it...
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit add an option to shim the whole wibox module when
running multi-screen tests. This is intended to lower the test
runtime when coverage is enabled.
In theory, most of that code is already covered by the
test-screen-changes suit.
This makes the coverage builds about twice as fast. This is
necessary because there is a large number of timeouts due to
limited resources on the Travis build system.
And stop listening to property::geometry, it's no longer needed.
This also remove messing up the border without saving it
somewhere. The concept is sound, but not the implementation.
In Gtk 2, the "first" argument to set_geometry_hints() is not optional.
However, this code does not provide any argument here. Improve the error
message in this case by checking for Gtk 3.
Reference: https://github.com/awesomeWM/awesome/issues/1495
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allows for `DO_COVERAGE=1 make check` with local tests (where
`CI=true` is not given).
It uses the new environment variables to configure the default theme,
instead of creating a temporary config/theme.
- Execute the tests without compiling, and don't mess with the source
files when coverage is enabled.
This ensures that the coverage report lines are correct.
This disables the doc tests, as their results would be unused.
Hack: it still expands macros on util.lua, because of
`util.get_themes_dir()` and `util.get_awesome_icon_dir()`, which might
be moved later. Ref:
https://github.com/awesomeWM/awesome/pull/1239#discussion_r93828178.
- ensure that BUILD_APIDOC and DO_COVERAGE are not used together
- awesomeConfig.cmake: add DO_COVERAGE as an option
- Travis: only install codecov with DO_COVERAGE=codecov
- Travis: do not use set -v; use set -x with DO_COVERAGE
- do not use trailing slashes with dirs in tests/examples/CMakeLists.txt / .luacov
- Use latest luacov (0.12.0-1) again
This reverts parts of 4cc6a815.
I think it is better to fix any failure that 4cc6a815 tried to work around.
- Travis: simplify/fix require('luacov') for functionaltests
- tests/examples/CMakeLists.txt: resolve ../.. in SOURCE_DIR
- tests/examples/CMakeLists.txt: add DO_COVERAGE to env
- Cleanup/simplify .luacov: work with SOURCE_DIRECTORY alone
- tests/run.sh: pass through / set SOURCE_DIRECTORY when running awesome
- tests/run.sh: resolve source_dir
- use DO_COVERAGE from env only
X11 does not allow to resize a window to size 0x0. Also, there are some
possibilities of integer overflows in our case. We tried to handle this
already, but there was a loop-hole: If the too-small-value is only
produced after applying size hints, then this was not caught.
Fix this by applying size hints before checking if the resulting size is
valid. However, this means some check needs to be duplicated to handle
the possibility of integer underflows while applying size hints.
Helps-with: https://github.com/awesomeWM/awesome/issues/1340
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a new argument to the test client spawning function that will
make the test client window set a resize increment property.
The API here is starting to a bit ugly, but since this is not any user
facing API, that should not be a problem.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Otherwise commented lines look like ---- My comment
instead of -- -- My comment. This wasn't a problem before the
intentation fix commit, but it is now.
Commit a944636c02 "bashified" tests/run.sh for some reason.
Afterwards, commit 4abd820051 fixed some of the fall-out.
However, there is still a problem left.
We have "set -e" in this script. Thus, whenever some command exits with
status 0, the script abort. When the variable errors is zero/unset, the
command "((errors++))" has exit status zero. Thus, this instruction
caused the shell script to abort. This was not intended.
Fix this by using "((++errors))" instead.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before this, the test runner used a timer which fired every 0.1 seconds
to "do its thing". Many of these waits seem unnecessary.
This commit makes the test runner wait 0 seconds for the first call of a
step function. Only following calls will have a timeout of 0.1 seconds
applied.
A full run of the test suite (tests/run.sh without further arguments)
took about 100 seconds before this change. After this change, we are
down to 60 seconds. This is almost factor two faster! (Well, five thirds
is the exact number, so factor 1.66)
(The numbers are best out of three runs. The "before" number is rounded
down while the "after" number is rounded up.)
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously we got the following unhelpful error message:
tests/_client.lua:98: bad argument #2 to 'assert' (string expected, got
userdata)
Signed-off-by: Uli Schlachter <psychon@znc.in>
This uses DOC_HIDE magic in the actual test code, except for the
template.lua files which do not have it.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The following commits will add DOC_HIDE uses that are not at the end of
the line, but the beginning. Hence, drop the requirement that it appears
at the end of the line and change the ".+" at the beginning into ".*".
Signed-off-by: Uli Schlachter <psychon@znc.in>
Copy-paste-y I was checking for the wrong result. Another unrelated
problem with the test runner caused me to miss this. Sorry!
Signed-off-by: Uli Schlachter <psychon@znc.in>
This removes a duplicate test and moves some "spawn with empty string as
argument" up to the long list of similar tests (and adds error
checking).
I do not see the point of the assert(#client.get() == 0) and so it was
just dropped.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Commit 5e6a893 broke error handling in awesome.spawn(): Instead of
returning an error message, it would just return its last argument.
This commit fixes that, removes some not-so-helpful warnings, and adds
lots of tests for this code.
Fixes: https://github.com/awesomeWM/awesome/issues/1281
Signed-off-by: Uli Schlachter <psychon@znc.in>
Locally I got this, where only two xterms were opened.
```
% tests/run.sh test-awesomerc.lua
awesome_log: /tmp/tmp.ToAKs6Gw4J/_awesome_test.log
== Running test-awesomerc.lua ==
Error: timeout waiting for signal in step 1/11 (@20).
===> ERROR running test-awesomerc.lua! <===
Error: timeout waiting for signal in step 1/11 (@20).
There were 1 errors!
```
This is a partial revert of commit 7901a1c647. The end result is the
same, but the change from that commit is reverted and instead the same
thing is done in a different way.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Ever since these files were added, these problems existed. I have no
idea what alt_fg is supposed to mean, but since a value of nil is
apparently ok, I just pass in nil directly.
Signed-off-by: Uli Schlachter <psychon@znc.in>
I really try to avoid doing this, psychon too, but enough is
enough. We don't have a solution and I would rather add more
tests that work than keeping a test that keep "failing" just
to remind us it's there.
Previously, the API to set the data that should be displayed was
:set_data(t) where t is a table. This table has the labels to use as its
keys and the numbers as its values. With this API, it was not possible
to influence the order in which the "pie pieces" were drawn.
This commit adds and uses a new API called :set_data_list(t). Here, t is
a table with integer keys and tables as values, thus one can iterate
over this with ipairs() and the order is well-defined. The tables used
as values contain the label as their first entry and the number as their
second entry.
Fixes: https://github.com/awesomeWM/awesome/issues/1249
Signed-off-by: Uli Schlachter <psychon@znc.in>
This test has a list of "things" that should be present in the output. This
table is iterated over via pairs(), which means that the output is
non-deterministic and the order of the entries is basically random.
Fix this by using ipairs() to get a deterministic iteration order. This requires
some slight change to the table that is iterated over.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This printed a table. This will make Lua print the address of the table and
hence the output of this test was non-deterministic.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There we go again... When hitting a slow CI node, there is again
timeouts when doing the multi-screen tests. As no solution to
bug leading to this has been found, the only thing to do is
increase the timeout.
Hopefully this commit will be reverted soon.
Spawn callbacks were never invoked when no startup-notification-rules were
given. This commit fixes the code so that "startup done" callbacks are also
called when no rules were given.
Fixes: https://github.com/awesomeWM/awesome/issues/1218
Signed-off-by: Uli Schlachter <psychon@znc.in>
Via this, I can set HEADLESS=1 in my wrapper-GNUMakefile that I use and
"make check" will no longer open a new window that gets in my way.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The code in luaA_client_swap() is incorrect, because
luaA_object_emit_signal() already pops the arguments to the signal.
Still, the code here tried to remove the arguments from the Lua stack
again, thereby corrupting the stack (removing more items than there are
in the stack).
Normally, popping more things from the stack than it has entries
silently corrupts the Lua stack. Apparently this doesn't necessarily
cause any immediate issues, because this code has been broken since nine
months and no one noticed. This mistakes was introduced in commit
55190646.
This issue was only noticed by accident. Thus, this commit also adds a
small integration test that exercises this bug. This test catches the
issue, but only on Travis, because there we are building our own version
of Lua 5.3 and that one has assertions enabled.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The usual "a or b"-trick to simulate C's ?:-operator does not work when
"false" is a valid value. Fix the code to handle this correctly and add
a short unit test which would have caught this problem.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The default config had tables like mywibox and mywibox[s] was the wibox
that is visible on screen s. When a screen is removed, nothing cleans up
these tables and so the screen and the wibox could not be garbage
collected. The same applies to the layoutbox, taglist etc.
This commit removes the global mywibox table and instead saves it as a
property on the screen. This way, the screen is not explicitly
referenced and when it is removed, the screen, its wibox and all of its
widgets become unreachable and can be garbage collected.
This commit also updates the docs and the tests that referenced things
(mostly the wibox) via mywibox[s] to now use s.mywibox.
Fixes: https://github.com/awesomeWM/awesome/issues/1125
Signed-off-by: Uli Schlachter <psychon@znc.in>
The new client is hopefully faster. Why, you ask?
Instead of spawning a new Lua process each time a test asks for a new window,
there is a "daemon process" which gets commands to open new windows from its
standard input. That way, Lua doesn't have to load LGI all the time and lots of
pointless work is skipped. The daemon process exits when its stdin is closed and
thus should automatically exit when awesome exits.
Fixes: https://github.com/awesomeWM/awesome/issues/1089
Signed-off-by: Uli Schlachter <psychon@znc.in>
This test changes the mouse cursor's position and afterwards has an
assert that checks something on the tooltip. This really looks a lot
like it expects the mouse cursor's position to be already updated and
its enter and leave events to be handled. However, this is now how
things actually work.
Fix this by moving the assert into its own step, so that in between the
normal main loop runs.
Signed-off-by: Uli Schlachter <psychon@znc.in>
run.sh waits for awesome's startup to be done by having awesome execute "return
1" via its dbus interface. However, by default dbus has a 25 second timeout
before it fails a dbus-send invocation. This defeats the purpose of this
exercise.
So instead of using awesome-client, this commit makes the code use dbus-send
directly and specifies a relative low reply timeout (which should still be
plenty so that this doesn't erroneously fail).
Signed-off-by: Uli Schlachter <psychon@znc.in>
The timeout utility guarantees an exit code of 124 when the process died due to
timeout. Since awesome only ever exits with 0 or 1, we can use this to reliably
detect timeouts and print a matching message.
Signed-off-by: Uli Schlachter <psychon@znc.in>
coreutils provides a timeout command. Use that instead of (badly) inventing our
own version of it. This "timeout" command seems to be new. Let's hope everyone
has it and think about alternative solutions only when needed.
Fixes: https://github.com/awesomeWM/awesome/issues/1075
Signed-off-by: Uli Schlachter <psychon@znc.in>
When awesome exits with a non-zero code, this is something interesting that we
should log. Do so.
The "set +e" / "set -e" dance is required so that we do not abort because the
wait builtin returns a non-zero code.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This script runs under "set -e", so any command exiting with a non-zero status
makes it abort. However, we do not care about failures from grep to find
anything, so handle that case gracefully.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before this commit: When we are GC'ing an object, we clear its metatable, since
otherwise crashes could occur in various places. This means that if someone
tries to use such an object, they get an unhelpful error message like "attempt
to index userdata object" and they don't understand what the problem is. Also,
this means that foo.valid does not actually work after GC.
This commit changes this behaviour. Instead of setting an empty metatable, we
now create a metatable with an __index and __newindex method. These metamethods
produce better error messages that they sat the underlying object was already
garbage collected. Better yet, the __index metamethod makes foo.valid be false
instead of causing an error, so that the existing machinery for detecting
invalid objects continues to work.
This commit also adds a functional test that verifies this behaviour.
Signed-off-by: Uli Schlachter <psychon@znc.in>
To ensure that some features such as SNID rules work, we need
to ensure that the screen isn't set by other code paths. Only
a single algorithm can be executed for the screen. As soon
as many algorithms are executed on events such as "manage", it
will most likely regress again.
This commit make sure of that by disabling the default normal source
of c.screen. After that, any other c.screen changes can be
considered bugs.
The code was written so that it assumes that disconnecting the last signal also
removed the corresponding entry in the signal array. This lead e.g. to an
index-out-of-bounds access in some cases.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The "test launching client on a specific screen" suit is very slow.
However, it is also necessary to avoid issues such as #1069 or #154
from regressing again.
This is a temporary fix until a faster test client "daemon" is
developped.
While testing using "the real deal" and with all the tests would be
better, it would add a lot of complexity to the testing framework.
This module generate multiple multi-screen scenarios and some obvious
issues that they can cause. Over time, as more steps are added, it
will provide "good enough" testing for multiple screens.
Individual test suits can require() this utility to replicate their
steps for each multi-screen scenarios.
This uses the new support introduced in f0f31bc305 in the docs and in
tests/run.sh, removing an useless use of cat/echo.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The build is no longer aborted when one of the "example tests" produces a
message on stderr. However, on Travis this requirement is still made. This
should catch "bad errors" via Travis while not breaking the build for users.
Fixes: https://github.com/awesomeWM/awesome/issues/821
Signed-off-by: Uli Schlachter <psychon@znc.in>
Running the tests sadly takes much to long. Since I don't have a good idea what
to do about this (I'd like to run all tests in a single Lua process, but that
doesn't seem to be possible easily), instead let's just make it more explicit
what is being done. This commit prints a message for each test that is being
run.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Now that tests are no longer scanned for recursively, the hack of passing values
back and forth via the environment is no longer needed and can be removed.
While at it, this also exchanges the "useless use of regex" for an explicit
string replacement.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Instead of recursively walking the directory tree, this commit makes the code us
GLOB_RECURSE to find all files and then handles them on after another.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The namespace of e.g. "tests/examples/awful/mouse/coords.lua" is "_awful_mouse".
This is purely based on the path of the file.
Previously, this was computed while recursively scanning the directory tree.
This commit instead moves this to an extra function that handles this task.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously, while recursively scanning the directory tree, the code in here also
scanned for template.lua files and remembered the latest one it found. This
commit adds a function which finds the right template.lua for a given file name,
making this search explicit and easier to understand.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There was a problem that the examples were considered to have failed as soon as
they produced any kind of output, but there were legitimate cases of warnings
being printed that triggered these checks. Commit 4819be4f4f used a
regular expression to detect and ignore this warnings.
This commit reverts the above commit and instead silences the warnings by
monkey-patching the function that prints the warnings into a no-op.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The requirement to call add_signal() was added to catch typos. However, this
requirement became increasingly annoying with property::<name> signals and e.g.
gears.object allowing arbitrary properties to be changed.
All of this ended up in a single commit because tests/examples fails if I first
let add_signal() emit a deprecation warning.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There was a race with autofocus. To overcome this, add another step that tests
that moving the client back to a visible tag and focusing it updates
_NET_CURRENT_DESKTOP. Afterwards, we kill the client so that it can no longer
interfere.
Signed-off-by: Uli Schlachter <psychon@znc.in>
As the documentation generation insert increasingly large ammount
of code into the lua files, the coverage data is getting less and
less accurate. This try to fix this by only collecting such data
after the `configure_file` calls are done.
kill is a wrapper around the POSIX kill() function and unix_signal is a table
that maps signal numbers to their names and signal names to their numeric value.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Apparently, there is such thing as not leaking enough...
Also try to clear the widgets from mywibox. This seem to help.
Time will tell.
Fixes#914, unfixes #808
Currently, tests/run.sh expects the directory layout that our wrapper Makefile
sets up before running CMake. This commit adds support for any other directory
configuration as well.
Signed-off-by: Uli Schlachter <psychon@znc.in>
GDK_SCALE=1 is needed to overwrite other settings that people might have which
would make geometry-related tests fail.
NO_AT_BRIDGE=1 gets rid of the following message that I am seeing:
** (lua:8321): WARNING **: Error retrieving accessibility bus address:
org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not
provided by any .service files
Signed-off-by: Uli Schlachter <psychon@znc.in>
Any clients with these tags end up somewhere random (the first tag on the first
remaining screen). This certainly can be improved in the future, but at least
this is a start.
Signed-off-by: Uli Schlachter <psychon@znc.in>
GtkApplication does magic like ensuring that the application ID is unique and
there is only a single instance of each application running. We don't want nor
need that for the tests.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Startup notification support in urxvt is optional while GTK always supports
startup notification. Thus, use the new GTK-based test client for the SN tests.
Fixes: https://github.com/awesomeWM/awesome/issues/848
Signed-off-by: Uli Schlachter <psychon@znc.in>
Tags are accessible as s.tags on a screen object. Yup, that's harder to find
than a variable that is defined in the default config, but such is life.
Now that awful.rules supports specifying tags by name, I guess that the number
one reason for needing the tags table is gone.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There was a regression when refactoring the API. It was no longer
possible to disable the automatic tag selection.
Due to recent changes, it was no longer possible to disable the
default tag selection handler. This commit extend the already
existing request::tag mechanism to let handlers select the tags.
This commit makes all C code that previously returned a screen index now return
a screen object, continuing the deprecation of screen indicies. Note that this
is an API break and will likely cause all kinds of problems for users.
The change also breaks some tests which are suitably fixed in this commit.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When e.g. test-leaks.lua fails, it will cause a Lua error before starting the
test runner. This means that the test will just hang, because nothing causes
awesome to quit.
Handle this by starting a timer when the test runner is loaded and quitting
awesome in there if no test run was started yet. This only works if all tests
load the runner before doing anything that could fail, so the require("_runner")
is moved to the beginning in every test.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Step 1 starts a client and uses awful.rules to move it to a not-selected tag.
Because this rule still has focus=true, this calls awful.ewmh.activate() via the
request::activate signal. This function makes the client urgent because it is on
a not-selected tag.
Step 3 does the same thing, but also uses switchtotag=true. Now
awful.ewmh.activate() doesn't make the client urgent because it successfully
focused this client. However, the test was wrongly assuming that the client
became urgent (copy&paste error? I don't know).
The fix is of course not to require the client to become urgent.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Currently, an error in the default config in the right place isn't noticed. Fix
this by doing two things:
- Also grep for "error" (this catches runtime errors with a stack trace)
- Make _runner print a "success" message at the end and also grep for that
Fixes: https://github.com/awesomeWM/awesome/issues/689
Signed-off-by: Uli Schlachter <psychon@znc.in>
Both the test runner and the wibox use gears.timer.delayed_call(). The test
runner uses this to call steps and the wibox uses it to trigger redraws. When
running under LuaCov, the Lua code becomes slow enough that the wibox didn't
redraw yet when the leak check is run. This causes the check to fail, because
the client is still referenced by the tasklist and thus cannot be garbage
collected.
Fix this by waiting one more iteration before running the leak check.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This opens xterm, closes it and makes sure that the client object representing
xterm is GC'able at the end. The test will fail currently.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The benchmarks in tests/test-benchmark.lua have two modes. When CI=1 is set in
the environment, only a "quick" and less exact test is done. Otherwise, a slower
and more exact measurements is taken. This was added so that we do not waste CPU
time on travis.
However, most of the time the user running "make check" doesn't want exact
measurements either. So instead of only being quick when CI=1 is set, this
commit changes the logic to always being quick unless BENCHMARK_EXACT=1 is set.
Additionally, a message is printed next to the benchmark results so that the
user is reminded to set this var if the measurements should actually mean
something.
Signed-off-by: Uli Schlachter <psychon@znc.in>
While setting up an environment to run the integration tests in, the run.sh
script uses sed to generate versions of several files that refer to the
not-installed version of files. One of these needs to replace the call to
beautiful.init().
Before commit 20c9723c5b, the corresponding line was:
beautiful.init("@AWESOME_THEMES_PATH@/default/theme.lua")
Now this wants to find and replace the following:
beautiful.init(awful.util.get_themes_dir() .. "default/theme.lua")
To handle both versions, this commit adds some wildcards to the sed-expression
so that any line containing a call to beautiful.init is found and replaced.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Having many arguments can easily get confusing and hard to understand. This
commit uses a table instead so that we have names that identify what each
callback does.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When using `spawn` without startup notification support, the
`startup_id` property on the client should be nil.
This adds rxvt-unicode to the Travis build, because it supports startup
notifications, but xterm does not. We should replace xterm with it in
the existing tests then later.
* This commit add a new module to avoid a (4 level) loop dependency
* It is now possible to call awful.spawn() with a table of properties
* awful.rules is used to execute the rules.
* Everything is public to allow alternative workflow modules such as
Tyrannical to use their own callback implementation.
This makes it possible to add something similar to a __index / __newindex
metamethod to all our C objects. Based on this, Lua can then easily implement
arbitrary properties on our capi objects.
I have no idea why this needs collectgarbage() to be called twice.
On the other hand, I can explain the change in tooltip.lua. Lua 5.2 introduced
"ephermeron tables". This means that in the following sitation, lua 5.2 can
collect the entry from the table, while 5.1 keeps the entry alive, because the
table has a strong reference to the value and that in turn has a strong
reference to the key:
t = setmetatable({}, { __mode = "k"})
do
local k = {}
t[k] = function() print(k) end
end
collectgarbage("collect")
print(next(t, nil))
To handle this incompatibility, this commit just removes the whole indirection
through the module-level variable "data".
Signed-off-by: Uli Schlachter <psychon@znc.in>
Apparently some of the last commits speeds up create_wibox() a lot. This
highlights that this is a bad test: After creating thousands of wiboxes, awesome
needed 15 seconds to draw all of them and in the end some dbus timeout aborted
the test run.
However, it's irrelevant how quickly we can create wibox. The interesting number
is how quickly we can display a new wibox. Thus, this commits changes the code
so that it also measures the time that is needed to update the wibox. This way,
we don't accumulate a huge number of pending repaints and everything's fine.
Some results (but there is nothing to compare this with):
create&draw wibox: 0.0373947 sec/iter ( 28 iters, 1.59 sec for benchmark)
update textclock: 0.00198174 sec/iter (515 iters, 1.937 sec for benchmark)
relayout textclock: 0.000614439 sec/iter (1710 iters, 1.051 sec for benchmark)
redraw textclock: 0.00116882 sec/iter (865 iters, 2.962 sec for benchmark)
tag switch: 0.000705579 sec/iter (1498 iters, 3.703 sec for benchmark)
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit does two things: It gets rid of the reference to the layoutbox that
the default config created and it changes the widget dependency cache to not
keep widgets alive unnecessarily.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Again, instead of directly connecting to various signals for updating a
tasklist, this commit changes the code so that there is just a single, global
connections and based on this a weak table with all tasklist instances is used
do the updates.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Similar to what the previous commit does for layoutboxes, this changes the code
for the taglist so that there is only a single, global connection to the various
signals and these update all taglists via weak tables.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This (ab)uses the integration tests to run a benchmark. This currently only
measures wibox drawing performance. To avoid wasting CPU-cycles, this does only
a quick run under travis while on "normal" runs the function under test is
executed in a loop to improve the precision of the measurement.
This benchmarks hopefully allow to optimize things in a clear fashion instead of
things like "it feels faster to me".
Results when run against the previous commit:
== Running test-benchmark.lua ==
create wibox: 0.0788958 sec/iter ( 13 iters, 1.103 sec for benchmark)
update textclock: 0.019493 sec/iter ( 56 iters, 2.507 sec for benchmark)
relayout textclock: 0.0160725 sec/iter ( 63 iters, 1.029 sec for benchmark)
redraw textclock: 0.0015601 sec/iter (647 iters, 1.875 sec for benchmark)
W: awesome: a_glib_poll:291: Last main loop iteration took 6.593912 seconds! Increasing limit for this warning to that value.
Results right before the new widget layouts were merged (commit 52154d0f15):
== Running test-benchmark.lua ==
create wibox: 0.0782874 sec/iter ( 13 iters, 1.095 sec for benchmark)
update textclock: 0.00736755 sec/iter (136 iters, 1.346 sec for benchmark)
W: awesome: luaA_dofunction:77: error while running function
[...]
error: /home/psychon/projects/awesome/build/lib/gears/object.lua:30: Trying to emit non-existent signal 'widget::layout_changed'
Closes https://github.com/awesomeWM/awesome/pull/451.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Emmanuel Lepage Vallee
Uli Schlachter
Uli Schlachter
Kevin Zander
getzze
Daniel Hahler
morethanoneanimal
actionless
copycat-killer
Daniel Hahler
SammysHP
Crazy Lemon
cmertz
The Personal Things
Uli Schlachter