Having buttons without an awful.util.table.join/gears.table.join
has never been officially documented to be supported. I hope there
isn't too many of those and they wont try to mix the new and old
API syntax, because that will totally break.
Now always call both check_widget and make_widget_from_value. This
should make it a lot less confusing when randomly trying to create
a widget as all ways to do it slowly converge toward an unified
one.
There is no better place to put it and need to always be required
for backward compatibility. Given Awesome no longer works properly
without `awful`, I put the code there.
The reason for this is that as more of CAPI is brought in line with the
current API guidelines, it is more and more likely the tests will hit
APIs shims (either to test them or because the prototype remains the
same and only the implementation moved to Lua).
The use case for this will be to detech which screen is connected to
an output from the screen rules.
It is in millimeters because this is what the output provides and in
inches because the DPI is based on that unit and screens are sold with
the size in inches on the box.
Identical viewports are already handled before getting into Lua,
but sometime xrandr gives another viewport that encompass all
others. It has to be removed.
When the screens are created from the viewport in Lua, the signal is
sent too early and the DPI and outputs have not yet been added. This
cause the `connect_for_each_screen` callbacks to be called with a
partially initialized screen object. It also causes the drawables to be
repainted too early.
CAPI now emits "_added" and "awful.screen" takes care of emitting
"added".
With this, there is plenty of palces where the DPI can be set before
those signals are sent. This allows wallpaper with the proper DPI to
work with screens created using `fake_add`. In turn, this will allow
screen rules to control the DPI. In "the past", the DPI used for those
handler was the native DPI of the screen with no opportunity to change
it before hand.
This is easier than messing with the `fake_resize()` method. This will
eventually have an awful.screen.rules equivalent to auto-split the
screen from the rules.
This doesn't mean removing all screens is supported. It isn't and never
will be. The only reason this commit exist is to allow some
initialization and error handling code to be tested.
Add `dpi.lua` to config.ld even if it isn't added yet. This is
because the way the test run has it cached in the build dir. A full
rebuild would take too long and timeout on travis for semi-large PRs.
Technically this doesn't solve any memory leak, but AwesomeWM uses in
average less memory when changing the selected tab in quick succession.
This is because it has less "temporary" tables to track.
Some titlebar widgets (`awful.titlebar.widget.titlewidget`,
`awful.titlebar.widget.button` and other specific button widgets) could
not be garbage collected until the associated client was unmanaged,
because the signal connection used to update the widget was never
destroyed, and the signal handling function was keeping a reference to
the widget in its environment. This resulted in high memory usage when
the titlebar widgets were recreated multiple times for the same client
(this does not happen with the default Awesome configuration, but may be
needed for dynamic titlebar reconfiguration in a custom config).
Modify the code to use weak tables instead of direct signal connections
to avoid keeping strong references to widgets. The widget update
functions still keep strong references to the widget itself (creating a
reference loop, but the Lua GC should handle it correctly) and the
client object, but this should not be a problem.
One publicly visible change is that `awful.titlebar.widget.titlewidget`
now has an `update` function, like the button widgets.
Signed-off-by: Sergey Vlasov <sigprof@gmail.com>
This is needed because if async code is run inside of a tooltip timer func the started property may not still be false.
The current version causes random spurious timer already started errors.
The awful.placement.no_overlap function always looked at the currently
visible clients when placing a new client. This produced a confusing
result when using awful.rules or the sn_rules argument of awful.spawn to
place the client on an unselected tag (the client was placed as if it
would be placed on a currently selected tag; if multiple clients were
placed on the same unselected tag, in many cases they were placed at the
same position, overlapping each other).
Make awful.placement.no_overlap check tags of the placed client and
handle the case of placement on an unselected tag in a more useful way:
- If the client is sticky or at least one of the client tags is
selected, keep the previous behavior: avoid overlap with all other
floating clients which are currently visible, and use the currently
active layout to determine the floating status.
An explicit check based on `c:tags()` is made instead of using
`c:isvisible()`, so that the previous behavior is kept even if the
client is hidden or minimized for some reason.
- If all client tags are unselected, avoid overlap with all other
floating clients which either are sticky or share at least one tag
with the placed client, and use the layout of the first tag of the
placed client to determine the floating status.
Signed-off-by: Sergey Vlasov <sigprof@gmail.com>
This way their name doesn't get mangle by the broken magic. It will also
eventually allow to `error()` in the template when the implicit
`@function` is used.
This commit also fixes a large number of issues found while
proof-reading everything.
ldoc has a magical `@classmod` module type which tries to detect
what is a method and what is a static function. It fails about as
often as it works. This commit makes everything explicit to remove
such issues.
Fixes#2640
Ref #1373
Even thought `awful.key` handles optional "release" parameter well,
parameters are also get used before passing them. In case (only)
optional "data" is provided, it faulty gets called on a release event.
* Add a request to handle the wallpaper when a screen is added or
resized.
* Add a request for screen decorations such as bars or gizmos when
a screen is added.
Both are also sent when a new handler is connected.
Previously, it would use the "real" args passed to the constructor.
It was a bad decision since:
* It doesn't allow the tag/tasklist to add properties internally
* It forces the widget to be created with a constructor rather than
the alternate declarative syntax
* It doesn't allow a tag/tasklist to be part of a widget_template
Technically this is a behavior change, but I doubt anybody will notice
given it is a dark and little documented corner of the API. Chances are
nobody have been using this API for years.
With this helper, it becomes possible to avoid manually setting common
properties such as the client in the tasklist of tag in the taglist when
the children widgets of the template have a set_+property_name.
This decision was taken out of necessity. While adding more style
elements to `awful.widget.common` isn't something I want, there is
little else to do here. The problem is that popup based lists only
have size constraints in one direction. So without a way to limit
the icon size, it will take 9999 pixels.
Instead of having the default template hardcoded as code, this turns the
template into a descriptive version. This makes it easier to come up
with own templates: Just copy the default template and make a slight
change to it.
No functional changes are intended, but I cannot rule out that I did no
mistakes.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There is not much good reason why this should be required and making it
optional is almost trivial, as this patch shows.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The current `awful.widget.layoutlist` is a fork of the so far uncommitted `naughty.widget.actionlist`. It was created because some of the support code for the new `naughty` implementation needed "easier to merge" usage examples. The `layoutlist` was chosen because it was both a low hanging fruit and genuinely useful.
This module is half way between the tooltip and the raw wibox.
It supports the following features:
* Auto resize to its widget size
* Support parent objects and placement
Fix#1683
If the `layouts` are set during initialization, `t.layout` will
return `floating` if `t.layouts` is added before `t.layout`. By
using the raw layout, the fallback doesn't kicks in.
Given noone understand this code, this will prevent some semi likely
regressions from going unnoticed. The main risk is the shims not
producing the exact same results as the real implementation and
cause different code paths to be taken.
As of this commit, both the "real" and "shim" implementation were given
the same set of tests with print() at every step of next_to. The
resulting log was then checksummed to ensure both are identical.
It also add some properties such as `border_width`, `border_color`
and `preferred_alignments`.
It also fix a documentation bug where the `margin_topleft` was called
`margins_topleft`. To conform to the documentation, both are now valid
but one should be removed the next time the API changes.
Fixes#1978
By passing the geometry, important information used by
awful.placement.next_to were "lost". Given `next_to` supports both
widget position, the mouse and client/wibox relative positioning, it
has to know the object type.
Update lib/awful/hotkeys_popup/widget.lua
Update lib/awful/hotkeys_popup/widget.lua
fix(awful: hotkeys_popup): caching issue if showing the same widget instance with and without AwesomeWM hotkeys
doc(awful: hotkeys_popup): extend docstring for args.show_awesome_keys
In the earlier revision of the keygrabber PR, there was a `release_key`
and it was suggested to rename it `stop_key`. However its sibling
`release_event` wasn't, so it is now confusing.
The commit adds a mild deprecation codepath to avoid breaking configs
based on git-master. However it isn't a "long term" deprecation notice
and the code can probably be removed in 5.0 without further delay.
Previously, the layout list was global. However it wasn't covering all
possible use cases and make using `awful.widget.layoutlist` hard since
a layout could be excluded from the `awful.layout.layouts` but still
used for a tag (by setting it explicitly).
Until now there wasn't much documentation available about how to use
these properties. With the new work on `awful.spawn` that rely more and
more on `awful.rules` integration, it is worth fixing.
This commit add a new documentation section and a future commit will
aggregate them to generate an index.
The toggle/show/hide function were incompatible with the current
`rc.lua` is `titlebars_enabled` was removed from the rules because
they were never created. This has always been the case but the
introduction os `request::titlebars` in Awesome 4.0 allows to solve
this longstanding issue. However until now it didn't.
Fix#2419
If the history file (or its parents) can't be created, running a command
will fail entirely. Since saving command history is not an integral part
of running a command, it would be nicer if it carried on, just without
saving history. This is what shells usually do.
This patch removes assertions in the history saving function and
instead adds an early return, so if the history isn't saved the command
invocation simply carries on.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
This commit adds a way to leverage the xproperty and startup_id APIs
to persist an execution token across restarts. It allows to use
`awful.rules` on clients that were executed by a previous Awesome
instance.
The main limitations of these methods is the lack of entropy used to
build the token. If the command is the same in multiple
`awful.spawn.once`, then it will not work as expected. To mitigate this
issue, the system try to concatenate the `awful.rules` table after the
command and hash the resulting string. Given rules are a table, it can
have loops and/or issues with keys ordering. The hash function sort and
limite recursion to prevent a stack overflow. Another issue is the
unreliability of startup notifications.
The awful.placement.no_offscreen function did not work properly when
composed with other placement functions; in particular, the default
configuration (awful.placement.no_overlap+awful.placement.no_offscreen)
was broken. The compose function sets args.pretend=true and puts the
result of the previous placement function into args.override_geometry
before calling the next placement function, but no_offscreen did not use
args.override_geometry, therefore the result of the previous placement
function was discarded.
All other placement functions use `geometry_common(c, args)` to get the
current client geometry; `area_common(c)` should be used only when
getting geometry of other clients.
This change also fixes the problem with margin handling (adding margins
should not affect the window size, only the window position should
change); the test output which was adjusted in commit 0275d3537d
is adjusted again to account for this change.
Signed-off-by: Sergey Vlasov <sigprof@gmail.com>
The awful.placement.no_overlap function was adding the window border
width to the client width and height (this is performed in
area_common(), which is called by geometry_common()), but did not
reverse this operation by calling remove_border() before returning the
final geometry; because of this, using no_overlap resulted in increasing
the window width and height by 2*border_width.
The bug was probably introduced in commit ebcc19844e (before
that commit no_overlap changed the window position directly instead of
relying on the new placement infrastructure), but was not noticed
because of other problems (e.g., in the default configuration the result
of no_overlap was overridden by the buggy no_offscreen).
Signed-off-by: Sergey Vlasov <sigprof@gmail.com>
The current taglist/tasklist allow filter function to remove elements
from the list. However they don't allow sorting or additional entries
to be listed.
This commit introduced such a concept. It will later be used by the
layoutlist where it becomes more relevant since layouts are used created
"objects".
This property is based on Motif WM hints and checks if the client
requests that it is not decorated with a titlebar.
Signed-off-by: Uli Schlachter <psychon@znc.in>
mergify[bot]
actionless
streetturtle
Emmanuel Lepage Vallee
laith-m0
Sergey Vlasov
Robert Andrew Ditthardt
worron
fREW Schmidt
fREW Schmidt
zsugabubus
Uli Schlachter
Uli Schlachter
mergify[bot]
Daniel Hahler
warptozero
Sorky
Peter Nerlich
Michele Lazzeri
tototest99
Aire-One
Alyssa Ross