This avoids awful.autofocus to kick in, focusing some other client in
between (where a focused signal would get emitted for, although the
intermediate client was never meant to have focus).
This is the traceback:
stack traceback:
/home/user/.config/awesome/cyclefocus/init.lua:199: in function 'add'
/home/user/.config/awesome/cyclefocus/init.lua:309: in function </home/user/.config/awesome/cyclefocus/init.lua:304>
[C]: ?
/usr/local/share/awesome/lib/awful/autofocus.lua:22: in function 'check_focus'
/usr/local/share/awesome/lib/awful/autofocus.lua:31: in function </usr/local/share/awesome/lib/awful/autofocus.lua:28>
[C]: ?
/usr/local/share/awesome/lib/awful/tag.lua:517: in function 'viewonly'
/usr/local/share/awesome/lib/awful/client.lua:69: in function 'jumpto'
/home/user/.config/awesome/rc.lua:1188: in function 'client_run_or_raise'
/home/user/.config/awesome/rc.lua:1217: in function 'run_or_raise'
/home/user/.config/awesome/rc.lua:1243: in function 'press'
/usr/local/share/awesome/lib/awful/key.lua:42: in function </usr/local/share/awesome/lib/awful/key.lua:42>
Ref: https://github.com/awesomeWM/awesome/pull/19
This supersedes https://github.com/awesomeWM/awesome/pull/107.
If a client's width/height is larger than the screen's geometry, align
it at the screen's x/y offset.
Test case with gvim, from a maximized terminal on a floating tag:
% gvim -u NONE -N --cmd "set lines=$((LINES + 5))"
Without this patch the top of the window is off-screen, but the bottom
should be. Fixing it using a number of lines that fit the screen should
display the window completely.
The 'request::activate' signal should be sent and handled immediately,
and not delayed. It was too much of a hack to work around the client
not being visible.
Instead, the "is visible" constraint on `capi.client.focus` will be
removed.
This reverts commit 6963ede3dc.
This gets rid of awful.util.unittest and instead creates an automatic test for
it under spec/awful/util_spec.lua. In the process, it also fixes the test to
actually test the right thing and I took the liberty to add some more tests.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This fix two things:
(1) Clients asking to be urgent while focussed, this have been reported
a few time for urxvt and I usually link a patch that fix this. This may
not be considered a bug by some, but I think it is.
(2) Add the ability to stop noisy clients from setting the urgent state
themselves.
This made it easier to figure out where a file causing an error was
coming from, but I could imagine that this could become too noisy, and
that there is/should probably be a more streamlined way to enable more
verbose logging / error output.
When loading persistent properties for a client, the loop value wasn't used,
but the original/requested property. This would only get triggered when
using more than one persistent client property (the default is one,
"floating").
That commit made awful.tag use timer.delayed_call() to call withcurrent() during
the manage signal. The idea was "if nothing else assigns any tags until the end,
apply some default ones".
However, the C core refuses to set the input focus to an unviewable client and
thus this means that setting the input focus during manage failed. So, instead
of using the delayed_call(), just call withcurrent() directly, like we did
before.
However, some part of that commit is still left: Awful.rules no longer
disconnects the withcurrent() callback from the "manage" signal. This was
originally added in commit 5e7ddd1efa, because it clients flickered otherwise if
they were moved to some unselected tag during "manage". This happened because
the C code unbanned the client when it got assigned the input focus and only
later did some other code move it to some unselected tag.
However, this flickering will no longer occur, because commit 3dbf89c990 added
lazy focus setting. Thanks to this, setting the focus no longer unbans a client
as a side-effect. Thus, if you focus a client and then remove it from all
selected tags, nothing will be visible on-screen.
To make a long story short: This commit reverts the part of commit 90fde1393f
which caused side effects. The part that wasn't necessary any more is left in.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This way this function runs after everything else did its job. The client will
only get assigned a tag after everything else had a chance to do so.
Thanks to this, awful.rules no longer has to disconnect the call to withcurrent.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Let's just quote a mail I received from Rastislav Barlik:
I tried to make use of awful.mouse.finder but I found out that it's not working
as supporting functions rounded_corners were removed with commit
03e0ee53d2.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Apparently I still had an old naughty.lua laying around in build/lib and thus
this new code wasn't actually tested. It's a miracle that it works so well
besides this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The new notification action code tried to emit dbus signals even if awesome was
build without notification support. Fix this by adding the necessary "if".
(This also removes an unused return value which wasn't marked as "local" and
thus triggered my "complain if something messes with the global env"-script)
Signed-off-by: Uli Schlachter <psychon@znc.in>
The whole point of this pcall() is that we do not have unprotected Lua errors,
because those kill awesome. So instead of assert()ing, let's just print a
message.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The desktop notification specification says that a notification can have
different actions. These actions allow the user to interact with the client
application and should be displayed by the notification server.
* Add function to emit a DBus signal
* Notifications : emit NotificationClosed signal when closing notification
* Notifications: use constant for notification closed reasons
* notifications: Implement notifications actions
This is just a basic implementation to display the actions send with the
notifications. The actions should be displayed differently
* Notifications: add support for default action
* Move the "index" setting burden to individual functions
instead of gettags().
* Add some properties earlier so the signal hooks will be called
with valid data.
This patch allows 2 things to be done:
* Write unit test to validate layouts using fake clients and tags
* Query the current layout geometry from another tag
The advantages of the former are clear and simple. Those of the later include:
* Creating a screenshot of another layout
* Display the layout wireframe in the tag list (like KDE2-3, Gnome2)
* Having and 'ALT-tab' like visual popup for tags
The old code transformed the top-left and bottom-right corner of the rectangle
to device space and calculated a rectangle based on these two points. However,
if you rotate a rectangle by 45°, these two points will be directly above each
other and thus the old code would calculate a width of 0.
Fix this by transforming all four corners of the rectangle into device space and
calculating a rectangle based on this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This uses busted (http://olivinelabs.com/busted/) to implement unit testing.
This is wired up to "make check" and/or "make test".
This commit also adds tests for the more complicated parts of the gears and
wibox.layout libraries.
Signed-off-by: Uli Schlachter <psychon@znc.in>
maximized() used to align the image with (0,0) so that it is shifted to the right or bottom. Most wallpapers are designed from the center, so this behavior is not desired usually. With this commit the wallpaper is centered when no offset is set. To get the old behavior use {x=0, y=0} for the offset parameter.
This function was accidentally setting the global variable "icontypes". Fix this
by adding the needed "local" and also localize some more variables for
consistency.
Signed-off-by: Uli Schlachter <psychon@znc.in>
`client.property.persist` can be used to make properties persistent
across restarts. This works by backing them up via X properties (using
the `awful.client.property.` prefix).
`client.property.persist(c, "floating", "boolean")` is used to make the
floating property persistent by default.
Based on a patch from Uli, source: https://gist.github.com/psychon/10320743
doc, only set current prop in 'persist'
Fix xprop/prop mixup in 'persist'
Only call set for non-nil values
This new awful module reacts to shapes that a client sets on itself and sets the
shape of awesome's frame window to match. This way, xeyes really gets
transparent parts again.
Signed-off-by: Uli Schlachter <psychon@znc.in>
From the Desktop Notification Specification:
'The "app_icon" parameter and "image-path" hint should be either an URI (file://
is the only URI schema supported right now) or [...]'
https://developer.gnome.org/notification-spec/#icons-and-images-formats
Signed-off-by: Uli Schlachter <psychon@znc.in>
Setting a tag's screen to what it already is shouldn't have any bad effects.
However, this code messed up the tag order and selection status.
Fix this by returning early if the tag already has the right screen.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Since commit 9c69e857ed, awful.tag.setscreen() unsets a tag's index to make
sure things end up in a sane order on the new screen. Thus, the call to
setscreen() removed the "index" property that tag.move just set.
Fix this by setting the index after the screen.
Signed-off-by: Uli Schlachter <psychon@znc.in>
It doesn't make sense for surface.load_uncached() to load a file without
inserting into the cache. The next "cached" load will have to load it again.
So move cache insertion into surface.load_uncached() and the only thing that
surface.load() does differently is checking if we have a suitable cache entry
before calling load_uncached().
So load_uncached() does the cache insertion and load() reads from the cache.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When an imagebox was drawn with width or height zero, it tried to calculate the
needed scale factor for making the image fit. Sadly, this would be a division by
zero aka infinite in this case.
Fix this by just not drawing anything if there is no space available.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Since commit 5b4666432f, we use set_text() instead of set_markup()
on the tooltip's textbox. This means it is no longer possible to use pango
markup in the tooltip which was not intended.
Fix this (properly) by introducing a :set_markup() function on tooltips (and use
it in the timer function to restore the old behavior).
Signed-off-by: Uli Schlachter <psychon@znc.in>
This inlines the set_defaults() function into its only caller and makes us less
stupid with the font property.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes the screen objects use our existing infrastructure for implementing
classes and objects with lua instead of hand-rolling an own version.
This results in some small API change: Screen objects no longer have an
add_signal() function and instead this function exists on the parent screen
class.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes gears.color() cache patterns in a weak table and returns that cached
pattern when we get called with the same argument again.
To benchmark this change, the following code was used:
local time = require("socket").gettime
function benchmark(func)
local begin = time()
local iter = 0
while time() - begin < 1 do
func()
iter = iter + 1
end
return iter
end
for _, arg in pairs({
"#00aa00",
"solid:#00aa00",
"radial:50,50,10:55,55,30:0,#ff0000:0.5,#00ff00:1,#0000ff",
"linear:1,2:3,4:0,#000000:1,#ffffff",
"png:/home/psychon/Wallpaper/Bars.png",
{ type = "solid", color = "#00aa00" },
{ type = "radial", from = { 50, 50, 10 }, to = { 55, 55, 30 }, stops = { { 0, "#ff0000" }, { 0.5, "#00ff00" }, { 1, "#0000ff" } } },
{ type = "linear", from = { 1, 2 }, to = { 3, 4 }, stops = { { 0, "#000000" }, { 1, "#ffffff" } } },
{ type = "png", file = "/home/psychon/Wallpaper/Bars.png" },
}) do
collectgarbage("collect")
print(benchmark(function() gears.color.create_pattern(arg) end), arg)
end
Before this change (larger numbers are better, this measures how many times we
can create the given pattern per second):
29525 #00aa00
29344 solid:#00aa00
3446 radial:50,50,10:55,55,30:0,#ff0000:0.5,#00ff00:1,#0000ff
4845 linear:1,2:3,4:0,#000000:1,#ffffff
32855 png:/home/psychon/Wallpaper/Bars.png
29883 table: 0x1bb67e0
3868 table: 0x1bb6830
5339 table: 0x1bb6c60
32772 table: 0x1bb6fe0
After this change:
126188 #00aa00
125962 solid:#00aa00
125125 radial:50,50,10:55,55,30:0,#ff0000:0.5,#00ff00:1,#0000ff
125213 linear:1,2:3,4:0,#000000:1,#ffffff
113659 png:/home/psychon/Wallpaper/Bars.png
125586 table: 0x1232680
125249 table: 0x12326d0
125468 table: 0x1232b00
113711 table: 0x1232e80
As you see, this makes some cases about 35 times faster (although I have to
admit that something like this can be expected from such a synthetic benchmark).
Signed-off-by: Uli Schlachter <psychon@znc.in>
Instead of loading files from disk every time we need them, add a cache to
gears.surface as a weak table that maps strings to cairo surfaces.
If this cache should be avoided, there is a new gears.surface.load_uncached()
function which works just like gears.surface.load() worked before.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The bugs this fix are:
* Invalid request using nil as screen
* Stop messing indexes in the old screen
* Prevent c.screen <-> t.screen mismatch
* Prevent no tags being selected in the old screen
When a screen doesn't have any tags selected, then just tag the new client with
all of the screen's tags. That way, we don't lose clients.
Also, if we failed at coming up with tags for a client, don't completely untag
it. This means that it can keep its old tags if it had any.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This reverts commit bbe86e4e25. That commit caused
unintuitive, special behavior. Instead, when someone wants us to set a screen,
we really should do so.
This commit partly reverts commit b4c83d0e70.
Because the C code emits property::screen before manage, this caused
awful.tag.withcurrent() to run on a client before it really was being managed.
This then tagged the client. Because of this tag changes, awful.layout reacted
and ran the layout code. Because c.type wasn't set up at this point yet, the
client wasn't considered to be floating yet. This caused the client's geometry
to change and thus its floating geometry was messed up.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The current premise is that c.screen should be the same as
awful.tag.getscreen(t).
The addition in `ewmh.tag` appears to be the important part here,
changing the order in awful.rules.execute is (maybe) only for
consistency across the codebase.
By default, tag.history.restore switches between the previous history
states, which is not what should get done when deleting a tag.
Without this, deleting multiple tags in a row, will jump back to the
first/fallback tag, instead of the older history entries.
This expands the tilde in the path to beautiful.init and changes the
expansion in theme values to only match '^~/': tilde expansion is only
meant to be expanded at the beginning.
The latter is not really tested.
The current premise is that c.screen should be the same as
awful.tag.getscreen(t).
The addition in `ewmh.tag` appears to be the important part here,
changing the order in awful.rules.execute is (maybe) only for
consistency across the codebase.
Previously, odd things could happen if a widget was getting fitted into a
negative width or, even worse, width being NaN (not a number)!
This can e.g. happen due to a margin layout which doesn't get enough space to
even draw the margin that it is supposed to add.
Fix this by enforcing a minimum value of 0 for the width and height that a
widget gets fitted into.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Given an imagebox i with i.resize_forbidden = false and a valid image set, the
call t:fit(0, 0) would return two times "not a number".
This is because the code first does some calculations to get the input image
into the available space and then tried to do some calculations needed for
scaling images up.
The first calculation already gave us h == 0 == w, the second calculation would
then calculate 0/0. This results in NaNs.
This was only noticed because NaN is not a valid table index in lua.
Fix this by returning 0,0 if we have an image of width or height 0 after the
first calculation. Since 0x0 images are valid in cairo, this also fixes the same
bug with such images.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There is a strong hint that you are doing something wrong: You call
client.emit_signal(some_signal, c). Chances are high that this signal is
supposed to be emitted on the client object 'c' instead of the underlying client
class.
This applies to awful.rules' usage of this signal.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before commit 1b2826 in lgi, the get_rgba() function on cairo SolidPatterns was
specified like this:
get_rgba = { ret = cairo.Status,
{ ti.double, dir = 'out' },
{ ti.double, dir = 'out' },
{ ti.double, dir = 'out' } },
The above commit fixed this (without saying so) and the code became:
get_rgba = { ret = cairo.Status,
{ ti.double, dir = 'out' },
{ ti.double, dir = 'out' },
{ ti.double, dir = 'out' },
{ ti.double, dir = 'out' } },
The prototype for the corresponding cairo function is:
cairo_public cairo_status_t
cairo_pattern_get_rgba (cairo_pattern_t *pattern,
double *red, double *green,
double *blue, double *alpha);
As you see, this functions gets four double* as arguments and it will save its
result via those pointers. Old versions of lgi call this function with too few
arguments and this will cause a segmentation fault when cairo dereferences an
invalid pointer.
Signed-off-by: Uli Schlachter <psychon@znc.in>
We now handle all "important" EWMH messages in lua and lua can decide to do
different things than the current obvious one.
Consistency!
Signed-off-by: Uli Schlachter <psychon@znc.in>
If a client gets moved to a screen without any selected tags, that client
disappears and it is non-trivial to get it back. Since this is unexpected and
annoying, make movetoscreen do nothing if the target screen has no tags
selected.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allows to apply properties and callbacks to a client like
awful.rules.apply would do, without the matching part.
This is useful with the new startup notifications, and lets you apply
the same properties and callbacks from e.g. a manage signal handler.
If a drawable has an opaque background, we don't need pseudo transparency and
thus its content don't change when it is moved. However, when we need pseudo
transparency, then we have to redraw the drawable to apply the new background.
Previously we just always did the redraw. This commit adds a helper function
gears.color.create_opaque_pattern() that analyzes a cairo pattern for
transparency. We use this new function to only redraw-on-move when there is
actual pseudo transparency in effect. Otherwise, this redraw can be skipped.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allow to spawn something, then apply some properties or rules when
the client show up ("manage").
This commit add:
* "startup_id" property for all clients object (immutable, can be nil)
* Second return value to awful.util.spawn() with the startup_id
* Update the documentation
Example:
local wait_for_it = {}
local pid,snid = awful.util.spawn("urxvtc")
wait_for_it[snid] = {ontop=true,sticky=false,
tag = awful.tag.gettags(mouse.screen)[1] }
client.connect_signal("manage", function (c, startup)
if c.startup_id and wait_for_it[c.startup_id] then
for k,v in pairs(wait_for_it[c.startup_id]) do
c[k] = v
end
if wait_for_it[c.startup_id].tag then
c:tags({wait_for_it[c.startup_id].tag})
end
end
end)
Signed-off-by: Uli Schlachter <psychon@znc.in>
This helps in cases where you have accidentally cloned an entry from
`layouts`.
Previously, no current index would be found and the function would
silently fail.
Signed-off-by: Daniel Hahler <git@thequod.de>
This allows for having clones of a table, where its entries are still
references to the original values.
This is useful for copying a "default props" table, where you want to
keep the reference to entries like `awful.layout.suit.tile`.
Signed-off-by: Daniel Hahler <git@thequod.de>
Added set_expand function with options of "none" "outside" or "inside" modes.
The "inside" mode is the default and will result in the original behavior. The
main benefit is being able to actually center a widget in the available space
with options of how to draw the outside widgets (expand to take the space,
or not.) Further functionality can be had by ommiting one of the outside
widgets. Set default layout mode in the constructor.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This changes the align layout fit function so that align:fit will not return
more space than is actually needed by its sub-widgets. Changes to align:draw
were also required so that any widget assigned to the middle slot will expand
to fill the remaining space.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Instead, use stack_client_push and emit the `request::activate` signal
from awful.rules.apply, if the client gets focus.
Signed-off-by: Daniel Hahler <git@thequod.de>
Pressing CTRL+DELETE removes the visible history entry, if any, then moves to the next history entry (like pressing DOWN would do).
If the last history entry is removed the previous one is shown in the prompt (like pressing UP would do).
CTRL+DELETE works on history entries only: i.e. it has no effect on a command entered but not executed yet.
To implement above behaviour I added saving history table to file on Escape key press.
Signed-off-by: Massimiliano Brocchini <massimiliano.brocchini@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Restoring a previous history entry changes the tag history (in the
meaning of currently selected tags), and therefore should also emit the
tag::history::update signal.
A use case might be to automatically hide tags with no clients on them.
Signed-off-by: Daniel Hahler <git@thequod.de>
Instead of having the C code mess with which tags are selected, we now emit a
signal on the tag that says that something requested it to be selected. Lua can
then handle this by only switching tags on the correct monitor and by updating
the focus history correctly.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commits adds awesome.register_xproperty(). This allows lua code to register
arbitrary X11 properties with awesome which will then watch these properties.
Whenever such a property is changed on a client or drawin, we will emit the
xproperty::name signal.
This also adds window:get_xproperty(name) and window:set_xproperty(name, value)
which allows to mess with properties.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Ever since commit 6b2e4352b (from 2010!), awesome.spawn() doesn't have a screen
argument anymore and the extra argument from util.spawn was just ignored. Fix
the code and the luadoc for these functions.
Thanks to blueyed for noticing this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This reverts commit 20afb26080.
The commit caused endless loops with tracebacks like this (shortened):
lib/awful/ewmh.lua.in:122: in function <lib/awful/ewmh.lua.in:117>
[C]: in function 'geometry'
lib/awful/ewmh.lua.in:122: in function <lib/awful/ewmh.lua.in:117>
[C]: in function 'geometry'
lib/awful/ewmh.lua.in:122: in function <lib/awful/ewmh.lua.in:117>
[C]: in function 'geometry'
When a client's geometry changes (and I consider the border width to be part of
the geometry here) and that client is one of fullscreen or
maximized_{horizontally,vertically}, make sure that the geometry as specified by
the state is still obeyed.
This also (accidentally) fixes things when a client gets moved to another
screen!
Signed-off-by: Uli Schlachter <psychon@znc.in>
Due to a copy&paste error, maximized_vertical and maximized_horizontal were
handled the same. Of course, vertical and horizontal aren't the same direction.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When we receive a _NET_ACTIVE_WINDOW request on the root window, we used to just
focus and raise the window. This didn't do much for clients which are on
non-selected tags.
Thus, this commit makes awesome emit request::activate on the client instead.
This is used in awful.ewmh to implement the old behavior again, but with
additionally marking the client as urgent if it isn't visible.
People who don't like this behavior can use client.disconnect_signal to disable
this behavior again. To make this really possible, awful.ewmh becomes a
"non-nil" module.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Daniel Hahler
Emmanuel Lepage Vallée
Daniel Hahler
Max
Samir Benmendil
Uli Schlachter
salorium
Roy Crihfield
Alexis BRENON
Rastislav Barlik
Da Risk
findkiko
actionless
Robert Siska
Sindre Føring Devik
SammysHP
Dario Russo
Jason Yan
Gino!
Tin Benjamin Matuka
sirkha
Massimiliano Brocchini
Campbell Barton