* Better widget names when using the declarative syntax
* Add ratio.get_ratio to avoid using the private API
* Also support `set_widget` when swapping widgets
Issues involve:
- :layout() had the wrong signature and expected a cr argument that was left
from when this was still the :draw() function.
- horizontal and vertical reflection were mixed up (I guess it has always been
this way?)
- The return value should be a table of widget placements. Instead it was just a
single widget placement.
This is broken since commit 85ab3f045b.
Fixes: https://github.com/awesomeWM/awesome/issues/718
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes the code use the existing functions for setting widgets. That way,
all the sanity checks that the existing functions have are applied for this code
as well.
I just spent half an hour tracking down a bug where a boolean ended up as a
"widget" in a fixed layout. The symptom was that while drawing the widget, an
error happened. Via this change, the error would instead be flagged while
constructing the widget.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This layout allow each widgets to take 'r' percent of the total
space, where 'r' is configurable.
It re-implement the 'wfact' system used by `awful.layout.suit.tile`
This layout display the widgets on top of each other. It can also optionally
display only the first one.
The most common use case is to create a composited widget. Other use case
include the creation of a "paged" stack to only display the most
relevant widget without adding extra complexity to the parent layout.
Until now, this layout was "append only". There was no official
APIs to remove, replace, insert and swap widgets. This is fine
for the usual wibox + sensors widget used by the majority of
users, but lack flexibility necessary to use the layout system
to place dynamic elements such as clients.
The methods introduced by this commit are also recursive. This
allow widgets to be decorated, wrapped and splitted without
having to add boilerplate code everywhere.
This remove duplicated code and will allow more "collection"
style layouts to be implemented without logic duplication.
This commit also do some small cleanup to remove duplicated
code now present in `awful.util`.
Fixes https://github.com/awesomeWM/awesome/issues/617
This allows scrolling a widget if there is too few space available. There are
several different modes available for how the scrolling "looks like".
Signed-off-by: Uli Schlachter <psychon@znc.in>
This has some positive results on the "benchmark test". Each single number is
the best one out of three runs.
Before:
create wibox: 0.0826502 sec/iter ( 13 iters, 1.157 sec for benchmark)
update textclock: 0.0186952 sec/iter ( 57 iters, 2.473 sec for benchmark)
relayout textclock: 0.0158112 sec/iter ( 64 iters, 1.028 sec for benchmark)
redraw textclock: 0.0015197 sec/iter (662 iters, 1.861 sec for benchmark)
After:
create wibox: 0.0825672 sec/iter ( 13 iters, 1.154 sec for benchmark)
update textclock: 0.00378412 sec/iter (277 iters, 4.216 sec for benchmark)
relayout textclock: 0.00259056 sec/iter (420 iters, 1.09 sec for benchmark)
redraw textclock: 0.00105128 sec/iter (958 iters, 1.79 sec for benchmark)
We see no significant change in the creation of wiboxes (99.9% compared to
before). Update (20% of the previous run time), relayout (16%) and redraw (69%)
are all sped up by this change.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before this, dependencies between widgets where implicitly discovered by
recursive calls to base.fit_widget() and base.layout_widget(). However, it is
too easy to get this wrong (just call one of these functions from outside of a
widget's :fit() / :layout() function) and the resulting mess would be hard to
debug.
Thus, this commit changes the API so that callers have to identify themselves
and we can explicitly record the dependency between the widgets involved.
This also fixes a bug where no dependencies were tracked for widgets after
:set_visible(false). Whoops...
Sorry for breaking the API for adding this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
After this change, fit_widget() enforces that a widget cannot ask for more space
than was offered to it. This also fixes a rounding issue in the flex layout
where its fit function would return too small numbers.
Thanks to this, lots of "XXX" comments in spec/ disappear.
Signed-off-by: Uli Schlachter <psychon@znc.in>
In expand nodes "none" and "outside", the variable size_remains describes how
much space is available for the first/third widget. Everything else is used by
the second widget. Thus, fitting the second widget to anything involving
size_remains is wrong. Instead, this commit uses the correct value.
This also fixes a messed up argument order for horizontal align layouts.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Having two modules named "base" is confusing and "wibox.layout" doesn't contain
much useful stuff. This is a first step for removing wibox.layout by moving a
function which should only ever be used internally in awesome.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This way "that other widget" doesn't prevent the current widget from being
garbage collected.
Please note that this in all of these cases the widget under consideration does
have a strong reference to the callback function. This means that the callback
cannot be garbage collected until "this widget" itself is collected. Thanks to
this, this change is safe.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The old code transformed the top-left and bottom-right corner of the rectangle
to device space and calculated a rectangle based on these two points. However,
if you rotate a rectangle by 45°, these two points will be directly above each
other and thus the old code would calculate a width of 0.
Fix this by transforming all four corners of the rectangle into device space and
calculating a rectangle based on this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously, odd things could happen if a widget was getting fitted into a
negative width or, even worse, width being NaN (not a number)!
This can e.g. happen due to a margin layout which doesn't get enough space to
even draw the margin that it is supposed to add.
Fix this by enforcing a minimum value of 0 for the width and height that a
widget gets fitted into.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Added set_expand function with options of "none" "outside" or "inside" modes.
The "inside" mode is the default and will result in the original behavior. The
main benefit is being able to actually center a widget in the available space
with options of how to draw the outside widgets (expand to take the space,
or not.) Further functionality can be had by ommiting one of the outside
widgets. Set default layout mode in the constructor.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This changes the align layout fit function so that align:fit will not return
more space than is actually needed by its sub-widgets. Changes to align:draw
were also required so that any widget assigned to the middle slot will expand
to fill the remaining space.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a :set_color() method so that the margin layout can color the margins,
drawing a bordered widget.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The last widget always took up the remaining
space even though fill_space(false)
had been called on the layout.
This got broken in commit 9d333113dd.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit adds and uses wibox.layout.base.fit_widget(). This function is a
wrapper for widget:fit() that caches the result and thus speeds things up.
This is necessary because some layouts call :fit() from their :fit() and :draw()
functions. Nesting such layouts means that at the widget at the tail of the
stack gets its :fit() function called quite often. If this function is not
blazingly fast, this results in noticeable slowness.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The flex:fit() function was calling the fit() function of the widgets it
contained with too large values, trying to hand out more space than it had
available. This resulted in more space being requested than was available and
some weird layout issues resulted.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Fixes mixed up min/max strategies and other bugs in min and max. Also
removes enforcing the size in draw, adhering more to awesome's layout
concept.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The function can be used to set the maximum size the widget in the
flex layout should take.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
I amended some change to commit 8560de597c which made the align layout's
middle widget really centered instead of being way too wide. However, this also
shrunk the widget on the "other" axis, too. This commit fixes that up.
A big "sorry" to Lukáš for breaking his patch.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This layout can be used to constraint the size of the widget it holds.
Depending on the strategy passed to it, the widget will have a minimum,
maximum or exact size that was set through this layout.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Centers the middle widget in the align layout in the remaining space
left by the widgets on the sides.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a fit function to the align layout that makes sure that
the layout will not take up all the available space in the other
axis than it's direction. Eg. for horizontal align layout, it will
only take up the maximum of its widgets' heights in the vertical axis.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The fit function of the flex layout is different from the fixed.fit one.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This replaces lots of function foo.bar(this, ...) with function foo:bar(...).
There should be no other changes in this commit.
The point is to make it easier for api documentation tools to figure out that
these are methods on objects.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Without this, input handling is broken (draw_widget() registers each widget with
its position for input handling).
This also removes some unnecessary save()/restore() calls. Our caller (again
draw_widget()) already does that for us.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Emmanuel Lepage Vallee
Daniel Hahler
Uli Schlachter
Yauhen Kirylau
Grigory Mischenko
kindlycat
Julian Wollrath
Ignas Anikevicius (gns_ank)
sirkha
Rocco Aliberti
Björn Åström
Lukáš Hrázký
Arvydas Sidorenko