This made it easier to figure out where a file causing an error was
coming from, but I could imagine that this could become too noisy, and
that there is/should probably be a more streamlined way to enable more
verbose logging / error output.
The old code transformed the top-left and bottom-right corner of the rectangle
to device space and calculated a rectangle based on these two points. However,
if you rotate a rectangle by 45°, these two points will be directly above each
other and thus the old code would calculate a width of 0.
Fix this by transforming all four corners of the rectangle into device space and
calculating a rectangle based on this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When an imagebox was drawn with width or height zero, it tried to calculate the
needed scale factor for making the image fit. Sadly, this would be a division by
zero aka infinite in this case.
Fix this by just not drawing anything if there is no space available.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously, odd things could happen if a widget was getting fitted into a
negative width or, even worse, width being NaN (not a number)!
This can e.g. happen due to a margin layout which doesn't get enough space to
even draw the margin that it is supposed to add.
Fix this by enforcing a minimum value of 0 for the width and height that a
widget gets fitted into.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Given an imagebox i with i.resize_forbidden = false and a valid image set, the
call t:fit(0, 0) would return two times "not a number".
This is because the code first does some calculations to get the input image
into the available space and then tried to do some calculations needed for
scaling images up.
The first calculation already gave us h == 0 == w, the second calculation would
then calculate 0/0. This results in NaNs.
This was only noticed because NaN is not a valid table index in lua.
Fix this by returning 0,0 if we have an image of width or height 0 after the
first calculation. Since 0x0 images are valid in cairo, this also fixes the same
bug with such images.
Signed-off-by: Uli Schlachter <psychon@znc.in>
If a drawable has an opaque background, we don't need pseudo transparency and
thus its content don't change when it is moved. However, when we need pseudo
transparency, then we have to redraw the drawable to apply the new background.
Previously we just always did the redraw. This commit adds a helper function
gears.color.create_opaque_pattern() that analyzes a cairo pattern for
transparency. We use this new function to only redraw-on-move when there is
actual pseudo transparency in effect. Otherwise, this redraw can be skipped.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Added set_expand function with options of "none" "outside" or "inside" modes.
The "inside" mode is the default and will result in the original behavior. The
main benefit is being able to actually center a widget in the available space
with options of how to draw the outside widgets (expand to take the space,
or not.) Further functionality can be had by ommiting one of the outside
widgets. Set default layout mode in the constructor.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This changes the align layout fit function so that align:fit will not return
more space than is actually needed by its sub-widgets. Changes to align:draw
were also required so that any widget assigned to the middle slot will expand
to fill the remaining space.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commits adds awesome.register_xproperty(). This allows lua code to register
arbitrary X11 properties with awesome which will then watch these properties.
Whenever such a property is changed on a client or drawin, we will emit the
xproperty::name signal.
This also adds window:get_xproperty(name) and window:set_xproperty(name, value)
which allows to mess with properties.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes the drawable paint the wallpaper in the background
(i.e. pseudo transparency) only if there is not a composite manager running,
as reported by the value of awesome.composite_manager_running.
In other words: drawables can now make use of true transparency.
Signed-off-by: Björn Åström <bjoast@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a :set_color() method so that the margin layout can color the margins,
drawing a bordered widget.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The last widget always took up the remaining
space even though fill_space(false)
had been called on the layout.
This got broken in commit 9d333113dd.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit adds and uses wibox.layout.base.fit_widget(). This function is a
wrapper for widget:fit() that caches the result and thus speeds things up.
This is necessary because some layouts call :fit() from their :fit() and :draw()
functions. Nesting such layouts means that at the widget at the tail of the
stack gets its :fit() function called quite often. If this function is not
blazingly fast, this results in noticeable slowness.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The flex:fit() function was calling the fit() function of the widgets it
contained with too large values, trying to hand out more space than it had
available. This resulted in more space being requested than was available and
some weird layout issues resulted.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Fixes mixed up min/max strategies and other bugs in min and max. Also
removes enforcing the size in draw, adhering more to awesome's layout
concept.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This has to be removed because it breaks the fallback to the default config if
the first config already managed to create a systray widget. This doesn't mean
that it is suddenly possible to have the systray visible in more than one place,
it just means that awesome will no longer complain about this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Let's consider the following notification:
naughty.notify({ text = "foo", bg = "#88888888", timeout=1 })
naughty.notify({ text = "foo", bg = "#88888888", timeout=2 })
When the first notification disappears, the second one is moved and takes its
place. However, its content was not redrawn. This makes the pseudo-transparency
break and the wallpaper that is shown in the back of the notification doesn't
match the real wallpaper.
Fix this by redrawing drawables when they get moved.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Thanks to the previous commit, a drawable can no longer have a finished cairo
surface. Instead, it will now have a nil surface. This commit handles this new
possibility.
Signed-off-by: Uli Schlachter <psychon@znc.in>
A hack around abusing the fact that width of a textbox is 0 when its
empty, while it's height is still set according to the font.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The function can be used to set the maximum size the widget in the
flex layout should take.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The systray widget's fit() function worked in the (rotated) user coordinate
space while the draw() function used device coordinates (unrotated). This meant
that width and height were swapped up in the calculations and the systray ended
up being way too small.
Fix this by making the draw() function use user coordinates, too. This means
that it needs some new magic to detect a rotated coordinate space. This, in
turn, means that the systray is now automatically rotated when you put it into a
rotate layout.
This might cause some minor breakage because people no longer need to call
:set_horizontal() on the widgets.
Thanks a lot to Alexander Gehrke for his help!
Signed-off-by: Uli Schlachter <psychon@znc.in>
I amended some change to commit 8560de597c which made the align layout's
middle widget really centered instead of being way too wide. However, this also
shrunk the widget on the "other" axis, too. This commit fixes that up.
A big "sorry" to Lukáš for breaking his patch.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This layout can be used to constraint the size of the widget it holds.
Depending on the strategy passed to it, the widget will have a minimum,
maximum or exact size that was set through this layout.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Centers the middle widget in the align layout in the remaining space
left by the widgets on the sides.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a fit function to the align layout that makes sure that
the layout will not take up all the available space in the other
axis than it's direction. Eg. for horizontal align layout, it will
only take up the maximum of its widgets' heights in the vertical axis.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The fit function of the flex layout is different from the fixed.fit one.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The current code relied on some widget to cause a redraw when the focus changes.
Obviously, this assumption is wrong.
Instead, the code now uses the proper "focus" and "unfocus" signals for setting
titlebar colors, but it also needs to set these colors when a new titlebar is
created (v1 of this patch forgot that). For this reason, update_colors has to be
saved for when a titlebar's colors are updated.
This commit also reverts the ugly redraw_hook hack from commit a1918b8306.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This patch gets rid of lots of errors that happen when beautiful.init() is not
called in the config. Most of them were missing default values.
Thanks to panthar for reporting this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Julian Wollrath
Ignas Anikevicius (gns_ank)
Daniel Hahler
Uli Schlachter
actionless
Emmanuel Lepage Vallee
Dario Russo
Tin Benjamin Matuka
sirkha
Björn Åström
Rocco Aliberti
Lukáš Hrázký