Previously, odd things could happen if a widget was getting fitted into a
negative width or, even worse, width being NaN (not a number)!
This can e.g. happen due to a margin layout which doesn't get enough space to
even draw the margin that it is supposed to add.
Fix this by enforcing a minimum value of 0 for the width and height that a
widget gets fitted into.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Given an imagebox i with i.resize_forbidden = false and a valid image set, the
call t:fit(0, 0) would return two times "not a number".
This is because the code first does some calculations to get the input image
into the available space and then tried to do some calculations needed for
scaling images up.
The first calculation already gave us h == 0 == w, the second calculation would
then calculate 0/0. This results in NaNs.
This was only noticed because NaN is not a valid table index in lua.
Fix this by returning 0,0 if we have an image of width or height 0 after the
first calculation. Since 0x0 images are valid in cairo, this also fixes the same
bug with such images.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There is a strong hint that you are doing something wrong: You call
client.emit_signal(some_signal, c). Chances are high that this signal is
supposed to be emitted on the client object 'c' instead of the underlying client
class.
This applies to awful.rules' usage of this signal.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before commit 1b2826 in lgi, the get_rgba() function on cairo SolidPatterns was
specified like this:
get_rgba = { ret = cairo.Status,
{ ti.double, dir = 'out' },
{ ti.double, dir = 'out' },
{ ti.double, dir = 'out' } },
The above commit fixed this (without saying so) and the code became:
get_rgba = { ret = cairo.Status,
{ ti.double, dir = 'out' },
{ ti.double, dir = 'out' },
{ ti.double, dir = 'out' },
{ ti.double, dir = 'out' } },
The prototype for the corresponding cairo function is:
cairo_public cairo_status_t
cairo_pattern_get_rgba (cairo_pattern_t *pattern,
double *red, double *green,
double *blue, double *alpha);
As you see, this functions gets four double* as arguments and it will save its
result via those pointers. Old versions of lgi call this function with too few
arguments and this will cause a segmentation fault when cairo dereferences an
invalid pointer.
Signed-off-by: Uli Schlachter <psychon@znc.in>
We now handle all "important" EWMH messages in lua and lua can decide to do
different things than the current obvious one.
Consistency!
Signed-off-by: Uli Schlachter <psychon@znc.in>
If a client gets moved to a screen without any selected tags, that client
disappears and it is non-trivial to get it back. Since this is unexpected and
annoying, make movetoscreen do nothing if the target screen has no tags
selected.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allows to apply properties and callbacks to a client like
awful.rules.apply would do, without the matching part.
This is useful with the new startup notifications, and lets you apply
the same properties and callbacks from e.g. a manage signal handler.
If a drawable has an opaque background, we don't need pseudo transparency and
thus its content don't change when it is moved. However, when we need pseudo
transparency, then we have to redraw the drawable to apply the new background.
Previously we just always did the redraw. This commit adds a helper function
gears.color.create_opaque_pattern() that analyzes a cairo pattern for
transparency. We use this new function to only redraw-on-move when there is
actual pseudo transparency in effect. Otherwise, this redraw can be skipped.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allow to spawn something, then apply some properties or rules when
the client show up ("manage").
This commit add:
* "startup_id" property for all clients object (immutable, can be nil)
* Second return value to awful.util.spawn() with the startup_id
* Update the documentation
Example:
local wait_for_it = {}
local pid,snid = awful.util.spawn("urxvtc")
wait_for_it[snid] = {ontop=true,sticky=false,
tag = awful.tag.gettags(mouse.screen)[1] }
client.connect_signal("manage", function (c, startup)
if c.startup_id and wait_for_it[c.startup_id] then
for k,v in pairs(wait_for_it[c.startup_id]) do
c[k] = v
end
if wait_for_it[c.startup_id].tag then
c:tags({wait_for_it[c.startup_id].tag})
end
end
end)
Signed-off-by: Uli Schlachter <psychon@znc.in>
This helps in cases where you have accidentally cloned an entry from
`layouts`.
Previously, no current index would be found and the function would
silently fail.
Signed-off-by: Daniel Hahler <git@thequod.de>
This allows for having clones of a table, where its entries are still
references to the original values.
This is useful for copying a "default props" table, where you want to
keep the reference to entries like `awful.layout.suit.tile`.
Signed-off-by: Daniel Hahler <git@thequod.de>
Added set_expand function with options of "none" "outside" or "inside" modes.
The "inside" mode is the default and will result in the original behavior. The
main benefit is being able to actually center a widget in the available space
with options of how to draw the outside widgets (expand to take the space,
or not.) Further functionality can be had by ommiting one of the outside
widgets. Set default layout mode in the constructor.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This changes the align layout fit function so that align:fit will not return
more space than is actually needed by its sub-widgets. Changes to align:draw
were also required so that any widget assigned to the middle slot will expand
to fill the remaining space.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Instead, use stack_client_push and emit the `request::activate` signal
from awful.rules.apply, if the client gets focus.
Signed-off-by: Daniel Hahler <git@thequod.de>
Pressing CTRL+DELETE removes the visible history entry, if any, then moves to the next history entry (like pressing DOWN would do).
If the last history entry is removed the previous one is shown in the prompt (like pressing UP would do).
CTRL+DELETE works on history entries only: i.e. it has no effect on a command entered but not executed yet.
To implement above behaviour I added saving history table to file on Escape key press.
Signed-off-by: Massimiliano Brocchini <massimiliano.brocchini@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Restoring a previous history entry changes the tag history (in the
meaning of currently selected tags), and therefore should also emit the
tag::history::update signal.
A use case might be to automatically hide tags with no clients on them.
Signed-off-by: Daniel Hahler <git@thequod.de>
Instead of having the C code mess with which tags are selected, we now emit a
signal on the tag that says that something requested it to be selected. Lua can
then handle this by only switching tags on the correct monitor and by updating
the focus history correctly.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commits adds awesome.register_xproperty(). This allows lua code to register
arbitrary X11 properties with awesome which will then watch these properties.
Whenever such a property is changed on a client or drawin, we will emit the
xproperty::name signal.
This also adds window:get_xproperty(name) and window:set_xproperty(name, value)
which allows to mess with properties.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Ever since commit 6b2e4352b (from 2010!), awesome.spawn() doesn't have a screen
argument anymore and the extra argument from util.spawn was just ignored. Fix
the code and the luadoc for these functions.
Thanks to blueyed for noticing this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This reverts commit 20afb26080.
The commit caused endless loops with tracebacks like this (shortened):
lib/awful/ewmh.lua.in:122: in function <lib/awful/ewmh.lua.in:117>
[C]: in function 'geometry'
lib/awful/ewmh.lua.in:122: in function <lib/awful/ewmh.lua.in:117>
[C]: in function 'geometry'
lib/awful/ewmh.lua.in:122: in function <lib/awful/ewmh.lua.in:117>
[C]: in function 'geometry'
When a client's geometry changes (and I consider the border width to be part of
the geometry here) and that client is one of fullscreen or
maximized_{horizontally,vertically}, make sure that the geometry as specified by
the state is still obeyed.
This also (accidentally) fixes things when a client gets moved to another
screen!
Signed-off-by: Uli Schlachter <psychon@znc.in>
Due to a copy&paste error, maximized_vertical and maximized_horizontal were
handled the same. Of course, vertical and horizontal aren't the same direction.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When we receive a _NET_ACTIVE_WINDOW request on the root window, we used to just
focus and raise the window. This didn't do much for clients which are on
non-selected tags.
Thus, this commit makes awesome emit request::activate on the client instead.
This is used in awful.ewmh to implement the old behavior again, but with
additionally marking the client as urgent if it isn't visible.
People who don't like this behavior can use client.disconnect_signal to disable
this behavior again. To make this really possible, awful.ewmh becomes a
"non-nil" module.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes the drawable paint the wallpaper in the background
(i.e. pseudo transparency) only if there is not a composite manager running,
as reported by the value of awesome.composite_manager_running.
In other words: drawables can now make use of true transparency.
Signed-off-by: Björn Åström <bjoast@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The default value for the second argument to :find() is 1, so nothing is changed
here. The third arguments disables pattern matching and instead gets us literal
interpretation of strings. This means that pattern characters like e.g. [, ] and
. don't get interpreted.
Signed-off-by: Massimiliano Brocchini <massimiliano.brocchini@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
When an area is split in two, for example horizontally, one of the windows
should have height math.floor(previous height / 2) and the other
math.ceil(previous height / 2), to be certain that no gaps are left between the
windows.
For instance, if the first window has height h and the second window has height
math.floor(h / 2), the height of the third window should be math.ceil(h / 2)
instead of the same as for the second window.
So to compute the size of window n + 1 it’s necessary to remember the size of
window n - 1 as well as that of window n.
Signed-off-by: Fabienne Ducroquet <fabiduc@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a :set_color() method so that the margin layout can color the margins,
drawing a bordered widget.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This gets rid of the unused first argument and adds a new second argument that
can influence individual items.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The documentation says that screen, the last argument to viewmore(), is an
optional argument. However, the implementation only treated it as an optional
argument in one place.
Fix this by always setting the screen variable itself to a screen.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Label of menu entries will be escaped automatically. Doing it manually
in menu:clients() will escape it it twice.
Patch removes the util.escape() call in menu:clients()
Signed-off-by: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The activated property was added to tag objects between awesome 3.4 and 3.5.
This is used in the C code to keep tags alive even when nothing else refers to
it and includes a tag e.g. in some root window properties.
Thus, to get rid of a tag and to make the C code drop its reference to it, we
have to set activated to false in this function.
Signed-off-by: Uli Schlachter <psychon@znc.in>
In case loading the theme failed and we don't have fg_normal or bg_normal, add
default values for these properties. All the other colors are only used if they
are defined, but these two always need to be defined.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When awesome restarts because a new screen was added or removed, clients can end
up being on a different screen than before the restart. However, the tags will
be carried across the restart. This means that a client could end up being
tagged with a tag from another screen. This results in weird behavior of tag
switches and confuses users.
To work around this, remove the client from any tags that are on a different
screen during startup. If the client ends up without any tags, it will then be
tagged with the currently selected tags.
Signed-off-by: Uli Schlachter <psychon@znc.in>
I am looking forward to the bug reports requesting awful.client.floating.set(c,
true) to also automatically un-fullscreen the client...
Signed-off-by: Uli Schlachter <psychon@znc.in>
Setting mouse.screen moves the pointer to the top left corner of that screen.
However, the very next line would then move the pointer elsewhere again. Thus,
the first one wasn't needed at all.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The last widget always took up the remaining
space even though fill_space(false)
had been called on the layout.
This got broken in commit 9d333113dd.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit adds and uses wibox.layout.base.fit_widget(). This function is a
wrapper for widget:fit() that caches the result and thus speeds things up.
This is necessary because some layouts call :fit() from their :fit() and :draw()
functions. Nesting such layouts means that at the widget at the tail of the
stack gets its :fit() function called quite often. If this function is not
blazingly fast, this results in noticeable slowness.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Well, whoops. There is no .bg property on wiboxes for quite a while already, it
is now a :set_bg member function.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Since only the body text of a notification may contain markup,
by combining the two together and calling set_markup(), the
title would also get interpreted as if it had markup.
This could be seen with:
$ notify-send "Title & text" "<i>body text</i>"
The unescaped & would get interpreted as broken markup and so
naughty would fall back to escaping everything which would make
the "<i>" tags be shown rather than interpreted.
So, the title must always be escaped so that it is not interpreted
as markup.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The flex:fit() function was calling the fit() function of the widgets it
contained with too large values, trying to hand out more space than it had
available. This resulted in more space being requested than was available and
some weird layout issues resulted.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Since commit d8a93dafa3, tags have an "index" property which decides about
the order in which they are displayed in the taglist. If a tag doesn't have this
property set, the next call to awful.tag.gettags() will fix this and "invent" an
index for this new tag.
However, if multiple tags didn't have an "index" property, gettags() would
assign all of them the same index. The following call to table.sort() would then
do random magic to these tags (remember: table.sort() is not a stable sorting
algorithm, so it is allowed to randomly swap around entries which have the same
sorting key).
Fix this by making sure that the new "index" properties are different from each
other.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Thanks to the previous commit, spawn_with_shell() can now easily fix lots of
problems that we previously had with escaping the argument to the shell.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Having this in lua means that size hints are only applied after the client got
resized. The bad side effect of this is some flickering if awesome is being
slow. And apparently, it is slow for way too many people...
Signed-off-by: Uli Schlachter <psychon@znc.in>
Fixes mixed up min/max strategies and other bugs in min and max. Also
removes enforcing the size in draw, adhering more to awesome's layout
concept.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This has to be removed because it breaks the fallback to the default config if
the first config already managed to create a systray widget. This doesn't mean
that it is suddenly possible to have the systray visible in more than one place,
it just means that awesome will no longer complain about this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before this, surface.load() would throw a lua error because it couldn't load the
icon which broke naughty's state.
With this commit, this error is caught and an error message is printed on stderr
instead.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Let's consider the following notification:
naughty.notify({ text = "foo", bg = "#88888888", timeout=1 })
naughty.notify({ text = "foo", bg = "#88888888", timeout=2 })
When the first notification disappears, the second one is moved and takes its
place. However, its content was not redrawn. This makes the pseudo-transparency
break and the wallpaper that is shown in the back of the notification doesn't
match the real wallpaper.
Fix this by redrawing drawables when they get moved.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Thanks to the previous commit, a drawable can no longer have a finished cairo
surface. Instead, it will now have a nil surface. This commit handles this new
possibility.
Signed-off-by: Uli Schlachter <psychon@znc.in>
A hack around abusing the fact that width of a textbox is 0 when its
empty, while it's height is still set according to the font.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The function can be used to set the maximum size the widget in the
flex layout should take.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The systray widget's fit() function worked in the (rotated) user coordinate
space while the draw() function used device coordinates (unrotated). This meant
that width and height were swapped up in the calculations and the systray ended
up being way too small.
Fix this by making the draw() function use user coordinates, too. This means
that it needs some new magic to detect a rotated coordinate space. This, in
turn, means that the systray is now automatically rotated when you put it into a
rotate layout.
This might cause some minor breakage because people no longer need to call
:set_horizontal() on the widgets.
Thanks a lot to Alexander Gehrke for his help!
Signed-off-by: Uli Schlachter <psychon@znc.in>
When no wallpaper exists yet, instead of creating a black image surface which
covers all the screens, just create a surface for the screen which we need. This
means that way less pixels have to be uploaded to the X11 server, which should
be faster.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allows to use cairo patterns directly for any kind of "color". This makes
it easier to use things which aren't possible through gears.color.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The previous attempt at making the utils.wm_name variable useful for
accessing some entries was silly. This is because a typical ShowOnlyIn
string would look as: 'Unity;Gnome;KDE;' and the matching currently is
done for the whole string, where as we need to match only a part of it.
This small (hackish) commit fixes that, or do we wanna parse this line
of a .desktop file properly?
Signed-off-by: Ignas Anikevicius (gns_ank) <anikevicius@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
I amended some change to commit 8560de597c which made the align layout's
middle widget really centered instead of being way too wide. However, this also
shrunk the widget on the "other" axis, too. This commit fixes that up.
A big "sorry" to Lukáš for breaking his patch.
Signed-off-by: Uli Schlachter <psychon@znc.in>
If user changes locale with os.setlocale to a "dirty"
locale (which use comma as decimal separator (not dot), e.g.
hu_HU) `tonumber` will produce "0,6" instead of "0.6"
which causes bad comparision.
Signed-off-by: uzsolt <udvzsolt@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
If theme.tasklist_plain_task_name is set to true, the various client
state marks will not be prepended to the task name.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This layout can be used to constraint the size of the widget it holds.
Depending on the strategy passed to it, the widget will have a minimum,
maximum or exact size that was set through this layout.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The arguments are optional, making it possible to use a custom function
to create the {tag,task}list layout. The base_widget arguments can be
used to override the base layout of the {tag,task}list widget.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Centers the middle widget in the align layout in the remaining space
left by the widgets on the sides.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a fit function to the align layout that makes sure that
the layout will not take up all the available space in the other
axis than it's direction. Eg. for horizontal align layout, it will
only take up the maximum of its widgets' heights in the vertical axis.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The fit function of the flex layout is different from the fixed.fit one.
Signed-off-by: Lukáš Hrázký <lukkash@email.cz>
Signed-off-by: Uli Schlachter <psychon@znc.in>
No callers expect a nil result from this function. In fact, this broke
awful.tooltip because it tried to get the workarea of screen nil.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The (x,y) position of a client is outside of the border, but the width/height
does not include the border (so the real width is width+2*border).
This means that we have to also subtract 2*border to make sure that the client
including its border really is inside of the expected area.
Signed-off-by: Uli Schlachter <psychon@znc.in>
No clue why this code is here, but it only allowed floating clients to be
resized beyond the edge of their screen. Clients on a floating layout were
forced to stay on their screen. Quite an unintuitive behavior and now this
behavior is gone.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Sticky clients showed up in the tasklist without being minimized when using the minimizedcurrenttags filter.
This patch fixes that.
Signed-off-by: Björn Åström <bjoast@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
When parsing .desktop, we care only about [Desktop Entry] group.
Everything else is ignored.
Signed-off-by: Arvydas Sidorenko <asido4@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The modules awful.menu and awful.util were placing variables in the global
environment which is a bad thing. Fix this by adding the right module name
prefixes to these variables.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The current code relied on some widget to cause a redraw when the focus changes.
Obviously, this assumption is wrong.
Instead, the code now uses the proper "focus" and "unfocus" signals for setting
titlebar colors, but it also needs to set these colors when a new titlebar is
created (v1 of this patch forgot that). For this reason, update_colors has to be
saved for when a titlebar's colors are updated.
This commit also reverts the ugly redraw_hook hack from commit a1918b8306.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This patch gets rid of lots of errors that happen when beautiful.init() is not
called in the config. Most of them were missing default values.
Thanks to panthar for reporting this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
In 3.4, an imagebox' image is set via "box.image = foo". Since widgets are just
ordinary tables in 3.5, this will actually mess with the imagebox' image without
setting it correctly.
Fix this by renaming the entry to "_image".
A similar patch was applied to the textbox widget ages ago.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This was passing c.icon as the icon of a menu entry. However, this is just a
light userdata which has to be turned into an lgi cairo surface object. Luckily,
surface.load() does that for us.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This saves space when constructing widgets, because some common cases can now be
done in a single line of code.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit makes it possible to change the wm_name attribute, which
means that programs can be shown/hidden according to the wishes of the
user.
Possible usecase: A user is using Gnome and Awesome together, but sinc
wm_name by default is awesome, all the apps shipped with GNOME DE are
hidden by default. Changing wm_name attribute in this case would solve
the issue.
Signed-off-by: Ignas Anikevicius (gns_ank) <anikevicius@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This replaces lots of function foo.bar(this, ...) with function foo:bar(...).
There should be no other changes in this commit.
The point is to make it easier for api documentation tools to figure out that
these are methods on objects.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The notification spec allow sending icons as data with a dbus message. The
rowstride for this can be set which means there can be bytes after each row of
icon data which must be ignored.
Before this commit, naughty wasn't properly ignoring these garbage bytes which
resulted in weird notifications.
Thanks to dadrc for reporting that gmusicbrowser's notifications didn't work.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Drawables could never be garbage-collected, because of the "wallpaper_changed"
signal. The callback function for this signal kept a strong reference to the
drawable.
Fix this by putting all drawable's draw() methods into a weakly keyed tabled so
that the strong reference to them disappears.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Size hints should be applied to the "real" client geometry. That means the area
taken by titlebars should be ignored.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commits adds the necessary lua code so that we finally can have titlebars.
As the baseline for the needed functionality, the titlebar code in awesome 3.4
and a quick poll on the mailing list were used.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Signals are emitted on individual objects and on the class for a while now. This
can be used to simplify this function a lot.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This new property is used for fixing some missing redraws that the old code had.
Those could be seen via awful.menu. Open and close a submenu repeatedly and the
submenu will appear black.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit makes it possible to add titlebars to a client. These titlebars are
drawables.
The drawin's input handling is moved to the drawable. This allows it to use the
same code for drawin and titlebar input handling, although there are lots of
differences between the two on the C side.
On the lua side, a new wibox.drawable module is created which handles all the
drawable-specific magic and which can also be used for titlebars.
Signed-off-by: Uli Schlachter <psychon@znc.in>
A drawable is something that you can draw to, just like a drawin. However, a
drawable isn't necessarily its own windows. This will later on be used to
implement titlebars where the titlebars are drawables.
Signed-off-by: Uli Schlachter <psychon@znc.in>
It helps a lot to know which signal does not exist. That should make it a lot
easier to look for the "guily" code without having to resort to the backtrace.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The wrong module names were introduced in commits:
0e2960ebf3 and
d799ac76aa.
Once fixed, client.lua and screen.lua mutually require each other, so we must
use a trick, and load the modules inside the functions that need them.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When changing focus to an other screen, awful.screen.focus keeps relative
position of the cursor, instead of moving to the top left corner. Does not
trigger mouse:enter and mouse:leave signals.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Added functions awful.client.focus.global_bydirection and
awful.client.swap.global_bydirection, that change focus and swap clients,
crossing screen boundaries.
Also modified awful.client.movetoscreen. Now calls awful.screen.focus.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The function awful.screen.focus_bydirection changes the screen focus
according to physical position. The code is based on
awful.client.focus.bydirection.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Add a parameter to configure menubar's prompt.
Signed-off-by: Alexander Yakushev <yakushev.alex@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
After the rewrite from modules they ended up being local, but should
be available to user externally.
Also remove unnecessary local context bindings.
Signed-off-by: Alexander Yakushev <yakushev.alex@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
dump_return is no longer local, so debug prefix must be provided
Signed-off-by: Alexander Yakushev <yakushev.alex@gmail.com>
Signed-off-by: Julien Danjou <julien@danjou.info>
This function is the counterpart of awful.client.setslave.
Windows is moved to the first position in the stack.
Signed-off-by: Sébastien Luttringer <seblu@seblu.net>
Signed-off-by: Uli Schlachter <psychon@znc.in>
When a property is now set to a function, the function's return value will be
used for the value of the property. The function gets the new client as its only
argument.
There is no property which accepts a function as its value and thus this change
can't break anything (yeah, famous last words...).
This should fix half of FS#1011. Panels now don't get focused by awful.rules.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Without this, input handling is broken (draw_widget() registers each widget with
its position for input handling).
This also removes some unnecessary save()/restore() calls. Our caller (again
draw_widget()) already does that for us.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes tag.viewidx take a screen index rather than a screen object,
complying with its doc string. This fixes#963.
Signed-off-by: Felix Bier <flx.bier@googlemail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Currently it takes `require('lgi.version')`, converts it blindly to
number and compares with another value.
I am using lgi v0.6.1 and that is not convertable to number value,
thus tonumber() returns nil and crashes Awesome.
The fix is to take major and minor numbers only ignoring the rest.
Signed-off-by: Arvydas Sidorenko <asido4@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
From 55eb706b698c3b0c59559eff342d6ee59ec9e3f3 Mon Sep 17 00:00:00 2001
From: Arvydas Sidorenko <asido4@gmail.com>
Date: Sun, 17 Jun 2012 15:11:01 +0200
Subject: [PATCH] Calling naughty.notify without specifing module
Lua 5.2 port bug, which shows up on notify-send
Signed-off-by: Arvydas Sidorenko <asido4@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
awful.wibox.tasklist was overwritting `tags` variable breaking all the
functionality which uses it.
Signed-off-by: Arvydas Sidorenko <asido4@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
For example, the rightmost pixel of a border-less graph wasn't draw and all
drawing was shifted one pixel to the left.
Signed-off-by: Uli Schlachter <psychon@znc.in>
behavior before: draw fg color everywhere and draw each value inverted as bg color.
if not enough values available "remove" the free area (draw a big rectangle with bg color over it).
behavior now: draw each value onto background as fg stroke.
Signed-off-by: Uli Schlachter <psychon@znc.in>
When something sends notifications which don't get mapped into some preset,
args.preset would be nil and indexing nil throws a lua error. Fix this by using
the default preset in that case.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The cairo bindings are quite new in lgi and thus we depend on a quite new
version of lgi. Older versions will fail with lots of weird errors, e.g.:
lib/gears/color.lua:61:attempt to call field 'create_rgba' (a nil value)
Signed-off-by: Uli Schlachter <psychon@znc.in>
Commit d14d6959ea caused every notify() call to fail with 'attempt to
compare number with nil' because the default_preset table no longer exists.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Many themes have prerendered icons of different sizes stored in
subdirectories named as '<size>x<size>'. By looking in these directories
when a specific icon size is specified, we can support themes in a
rather straightforward way.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Build the preset values by merging the default preset with the one
actually specified, falling back to the normal preset if no preset is
specified.
This allows changing the position/font/whatever of all notification by
only setting up the default preset value (modulo overrides in the other
presets), instead of having to manually set it in all presets.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Instead of creating unused cairo image surfaces, we create our temporary layouts
now via the (PangoCairo) font map. Way less ugly.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds the documentation about keybindings for luadoc.
Signed-off-by: Ignas Anikevicius (gns_ank) <anikevicius@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
For example, I have some lua code which sets the border width based on the
number of visible clients. When just a single client is visible, the border
width is 0, else it's what the theme says.
Previously, this caused visible "glitches" for fullscreen'd and maximized
clients. This patch fixes that and updates the client's geometry and
border width appropriately.
This has a slight chance of going into an endless loop if someone sets a
fullscreen'd clients border width from its property::border_width signal.
Just don't do that!
Thanks to Arvydas Sidorenko for finding this issue.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Patterns like
if condition then
return true
else
return false
end
could be simplified to
return condition
Signed-off-by: Felix <flx.bier@googlemail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds more navigation keybindings ('Home' and 'End'), which select
the first and the last entry from the list respectively. Also, it adds
two more keybindings:
'Ctrl+Enter' - Run the query (no need to press End and then
Enter)
'Ctrl+Alt+Enter' - Run query in the terminal (sometimes there are
terminal applications which one wants to run, e.g. ncmpcpp)
Signed-off-by: Ignas Anikevicius (gns_ank) <anikevicius@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
After some recent keygrabber changes the menubar's application
execution was broken. This commit fixes it.
Signed-off-by: Alexander Yakushev <yakushev.alex@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Since we can search for commands in menubar and easily execute almost
any program now, we can definitely make use of awful.shell.completion,
which is enabled with this commit.
Signed-off-by: Ignas Anikevicius (gns_ank) <anikevicius@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This adds a 'Exec: <your-cmd-here>' item to the end of the list,
which appears only if there is at least one application entry in
the list. This is useful, when the program is not in the list of menubar
entries (e.g. it does not have a .desktop file).
When there is are no matching application entries, the 'Exec: ' item is
silently removed, as we already have the same in the prompt.
Signed-off-by: Ignas Anikevicius (gns_ank) <anikevicius@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Should ideally have been removed in commit 'drawin: Remove bg_color property'.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
In commit "awful.client.setslave: Fix for not-visible clients", I copied some
code from awful.client.visible(). However, I missed that I where supposed to
change something in the code that I had copied. Whoops.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously, setslave() put a client only at the end of the list of visible
clients. Obviously this means that it didn't do anything helpful if the target
client was not visible.
Fix this by iterating over all clients on the target screen instead of just the
visible ones.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Enabling matching the command name of the menubar entries with the
query, which improves the flexibility of the widget. The functionality
works as follows:
You want to run GIMP, which has a name of "GNU Image Manipulation
Program". Previously by typing in gimp one would have <no matches>, but
now it will match GIMP entry.
Signed-off-by: Ignas Anikevicius (gns_ank) <anikevicius@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
All of the capi should be in a capi table. This make the code more
consistent. Also, it is not worth importing awful.prompt as a different
variable as it is used only once. Calling it awful.prompt make the code
clearer as there are other variables called prompt.
Signed-off-by: Ignas Anikevicius (gns_ank) <anikevicius@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
this makes the use of cur_menu obsolete because now every menu and submenu gets its own keygrabber. there is no need anymore to track the latest opened menu globaly.
Signed-off-by: Uli Schlachter <psychon@znc.in>
dump_raw function wasn't printing the plain (non-table) value if the
tag was not specified.
Signed-off-by: Alexander Yakushev <yakushev.alex@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
If you now set a wibox' background to e.g. "#00000080", the wibox will do fake
transparency and draw the wallpaper as its background.
This should cover 90% of uses of wibox transparency. For the remaining 10% I'll
wait for bug reports. :-)
Signed-off-by: Uli Schlachter <psychon@znc.in>
:lines() generator in parse_dir function was not used properly which
caused problems when using LuaJIT.
Signed-off-by: Alexander Yakushev <yakushev.alex@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This commit adds a new {bg,fg}_occupied option to the taglist. These control the
background and foreground color that unselected but occupied tags get in the
taglist. Occupied here means that at least one client is tagged with that tag.
Thanks to NougatRillettes for submitting this.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The only caller of focus.history.add() should be the "focus" signal, so at that
time the unfocusable client already does have the focus. At that point, there is
no reason why this shouldn't be recorded in the focus history.
(And yes, unfocusable clients can be focused. Don't ask.)
This should hopefully fix FS#778.
Signed-off-by: Uli Schlachter <psychon@znc.in>
To avoid collision and confusion with other methods having the same name. So,
awful.client.cycle -> awful.client.iterate (renamed)
awful.util.table.cycle -> awful.util.table.iterate (renamed)
These methods were added in commit "add awful.client.cycle", and "add
awful.util.table.cycle".
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Menubar is a dmenu-like applications menu for Awesome
Signed-off-by: Alexander Yakushev <yakushev.alex@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
I simply moved out the code to 'jumpto' a client from
`awful.client.urgent.jumpto` into a separate function of its own so that it can
be reused.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
changed_callback allows to execute arbitrary code any time the
command string changes.
keypressed_callback allows to intercept keypresses before
awful.prompt.run code handles them and run arbitrary code depending on
the key pressed and modificators.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Returning true from the callback to `keygrabber` is no longer necessary to
continue grabbing the keyboard.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Returning true from the callback to `keygrabber` is no longer necessary to
continue grabbing the keyboard.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
This was broken since 014d191f66 (which made this kind of stuff mandatory,
because 'return false' is ignored now). Whoops.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Fix this function so that it respects the recent changes in the ewmh.lua
code. It also incorporates some additional logic to respect the
border-width.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Previously we were not taking into account the border-width of the
client which we ought to as otherwise the client goes of the screen by
several pixels. It's slightly more ugly when we have several screens
connected.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes awful not to overwrite the saved geometry by just storing the
two geometries in separate places.
Signed-off-by: Uli Schlachter <psychon@znc.in>
I don't see why people would not want keyboard-enabled-menu by default.
Without it, you can't even use 'Escape' to quit the menu or press 'Enter' to
execute an entry. But instead of just enabling keyboard support by default, we
remove the option of disabling keyboard support altogether, which also
simplifies the implementation a bit.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The corresponding pattern factory that `string_pattern` delegates to is stored
in the `creator` parameter, and not `v`; probably a typo.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
add awful.client.cycle to iterate through clients that match a given condition
A common use case is to cycle through clients that match a given rule and take
certain action on them: raise, set or get property, etc.; see usage example in
the docs.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
add awful.util.table.cycle to iterate through elements that match given
condition
This will help writing concise code when one wants to apply a function to
(read, take some action) on a select list of elements in a table (of say,
clients and tags).
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Replaced all references to image_surface_create_from_png to
awesome.load_image
Signed-off-by: Arvydas Sidorenko <asido4@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
So the utility of `awful.placement` is not merely limited to client objects,
but also to wiboxes.
[us: use appropriate naming convention; catch misplaced statement]
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Given an object's coordinates, `awful.screen.getbycoord` can be used to
determine the screen than the object is, or should be attached to.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The `screen` property on wibox (drawin) was removed in the commit - 'drawin:
Remove screen property'.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Luadoc confuses '<stop>' with an HTML tag otherwise.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
In general, patterns are specified as 'type:arguments', where 'arguments' is
specific to the pattern used. The example provided in the documentation,
defined the pattern type to be 'linear', but used arguments meant to create
radial pattern. So we modify the example to use the correct type -- 'radial'.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The documentation for these functions were hidden (intentionally?) from luadoc
because of misspelt @class and @name tags. Fixed the spelling, so luadoc can do
its job.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Symbols (or, visual hints) used to indicate that a client is: 'ontop' or
'floating' or 'maximized_horizontal' or 'maximized_vertical', can now be
defined in the theme, or passed to awful.widget.tasklist() as the last, 'style'
argument (see docs).
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Most probably, the original author chose to use 'K' first, switched to
'myclock' later, and forgot to update remaining occurrences of 'K'.
Signed-off-by: Anurag Priyam <anurag08priyam@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
The default background color (None) means that the server will leave the
window's content untouched when an exposure happens. This should get rid of all
cases of "flashing window".
The real background will later be drawn while awesome is handling the expose
event.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Before this commit, a submenu was border_width pixels lower than its parent menu
entry. Fix this by not adding the border_width to the submenu's position.
We still have to add the border_width to the parent menu's width so that the
border of the submenu entry doesn't overlap the content of its parent menu (the
borders of the two menus do overlap!).
Signed-off-by: Uli Schlachter <psychon@znc.in>
Initializing the client property "floating_geometry" on the
property::geometry signal is problematic since this is emitted before
client_set_border_width(), causing the internal client geometry to get
stored and later passed to client:geometry() which assumes it includes
titlebar and borders.
Signed-off-by: Corey Thompson <cmtptr@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
If the first argument to cycle must be > 1 or else return nil
immediately.
Signed-off-by: Perry Hargrave <resixian@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
In the textbox' draw() callback we forgot to set the pango layout's width and
height. Whoops.
This was tested with the following code which makes it visible when the textbox
draws outside of its assigned space:
local w = wibox({ screen = 1 })
w.y = 10
w.x = 10
w.width = 150
w.height = 150
w.visible = true
local wi = wibox.widget.base.make_widget()
local t = wibox.widget.textbox()
t:set_markup("Foo <b>bar</b> <i>Foobar</i> und so weiter")
wi.draw = function(d, wibox, cr, width, height)
cr:move_to(24.5, 0)
cr:line_to(24.5, 150)
cr:move_to(0, 24.5)
cr:line_to(150, 24.5)
cr:move_to(124.5, 0)
cr:line_to(124.5, 150)
cr:move_to(0, 124.5)
cr:line_to(150, 124.5)
cr:set_line_width(1)
cr:stroke()
cr:translate(25, 25)
t.draw(t, wibox, cr, 100, 100)
end
w:set_widget(wi)
Signed-off-by: Uli Schlachter <psychon@znc.in>
Tagging sticky clients shouldn't hurt anything, but it helps a lot if the client
later becomes unsticky. I'd have no tags in that case.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Instead of re-creating all the widgets for the list entries on each update, this
code now caches its widgets again and only creates new widgets when a new
client/tag appears.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This option is no longer valid in modelines, so it has been removed from
all modelines using the following shellscript:
#!/bin/ksh
git ls-tree -r HEAD | cut -f2 | while read f; do
egrep -e '^(//|--) vim: .*encoding=' $f >/dev/null || continue
sed -E -e '/^(\/\/|--) vim:/s/:encoding=utf-8//' $f > /tmp/foo
mv /tmp/foo $f
done
Signed-off-by: Gregor Best <gbe@ring0.de>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Replacing a popup only worked when it wasn't the newest notification we had. Fix
this to also work if no new notification showed up in between.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Instead of creating a pango layout all the time (e.g. twice per redraw), we now
only create a single layout which we keep around all the time and update as
needed. Hopefully this helps a little.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This handles corner case where a client has no tags (e.g. stickied), but
is moved across screens.
Signed-off-by: Perry Hargrave <resixian@gmail.com>
Signed-off-by: Uli Schlachter <psychon@znc.in>
Only do a tag.viewonly() if the urgent client is not visible.
Further, if the boolean 'merge' parameter is true [default false], then
to a tag.viewmore() with all the currently visible tags.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Let's just quote the bug report:
A regression was introduced in commit f5a5af4001
which causes wiboxes to position themselves incorrectly on Xinerama screens
besides the first one. In lib/awful/wibox.lua.in line 49, function
set_position(), the screen number used to use wibox.screen but now just defaults
to 1. Since the screen parameter is never actually passed to set_position(),
that means that wiboxes will always use screen 1's geometry when determining the
proper position. So, if a different screen is larger or smaller or isn't aligned
with the primary screen, the wibox will either be offscreen or not on the edge.
This should be fixed by explicitly passing the right screen argument to all
functions which need it.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Apparently some people start a timer, switch to an empty tag and then let the
timer move a client to that empty tag. This change makes sure that this new
client will get the input focus in this case.
Signed-off-by: Uli Schlachter <psychon@znc.in>
There is no point in keeping this font cache alive for longer than needed.
Letting lua garbage-collect fonts should provide sane cache-behavior in that we
forgot about the font once no one uses it anymore.
Signed-off-by: Uli Schlachter <psychon@znc.in>
The menu was first made visible and then placed correctly. This caused a short,
black flicker in the top, left corner of the screen.
Fix this by removing a too early "visible = true".
This was introduced by me in 4d280365ad, sorry.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Uli Schlachter
Daniel Hahler
Emmanuel Lepage Vallee
sirkha
Massimiliano Brocchini
Campbell Barton
Björn Åström
Fabienne Ducroquet
Rocco Aliberti
Enrico Scholz
Jan Larres
heithe
Ross Lagerwall
Jo De Boeck
Poggles
cdump
Lukáš Hrázký
Felix Bier
Thomas Jost
Alexander Yakushev
Ignas Anikevicius (gns_ank)
uzsolt
Daniel
Arvydas Sidorenko
Gregor Best
Josh Komoroske
dodo
Clément Démoulins
Abdó Roig-Maranges
Alexander Yakushev
Sébastien Luttringer
Anurag Priyam
Giuseppe Bilotta
TsT
Axel Beckert
Julien Danjou
Corey Thompson
Perry Hargrave
Majic
dodo
Radu Andries